• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.210-217
• /
• 2015

Ipfencarbazone is a herbicide of the tetrazolinone class, and is believed to be an inhibitor of very long chain fatty acids (VLCFAs), which control cell division in weeds. The objective of this study was to develop and validate an official analytical method for ipfencarbazone determination in agricultural products. The ipfencarbazone residues in agricultural products were extracted with acetone, partitioned with n-hexane, and then purified through silica SPE cartridge. Finally, the analyte was quantified by gas chromatograph-electron capture detector (GC-ECD) and confirmed with gas chromatograph/mass spectrometer(GC/MS). The linear range of ipfencarbazone was 0.01 to 1.0 mg/L with the coefficient of determination ($r^2$) of 0.9999. The limit of detection (LOD) and quantification (LOQ) was 0.003 and 0.01 mg/kg, respectively. In addition, average recoveries of ipfencarbazone ranged from 80.6% to 112.3% at the different concentration levels LOQ, 10LOQ and 50LOQ, while the relative standard deviation was 2.2-8.6%. All values were consistent with the criteria ranges requested in the CODEX guidelines. Furthermore, and inter-laboratory study was conducted to validate the method. This proposed method for determination of ipfencarbazone residues in agricultural products can be used as an official analytical method.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.281-290
• /
• 2019

BACKGROUND: As the demand for strawberries increases, people are paying attention to food safety in strawberry, especially pesticide residues. To remove the pesticides from strawberry, various washing and processing technique in households are additionally required. METHODS AND RESULTS: Strawberries were washed with water, detergent, alcohol, and ultrasonication and processed to strawberry jam. The mean reduction efficiency according to the washing solvent and method was found to be higher in the order of detergent (42.5%) > alcohol (41.7%) > water (41.3%) > ultrasoniation with alcohol (40.2%) > ultrasoniation with water (38.6%) > ultrasoniation with detergent (36.9%), but there was no significant difference among the treatments. The residue levels of pesticides during processing to jam decreased by 11.9-94.4% for etoxazole, fluopyram, procymidone, spiromesifen, and prochloraz, while the other pesticides were concentrated by boiling, or rather increased by 11.8-40.2%. However, when the residue levels were converted to residual amounts in consideration of the change in weight after processing, the residual amounts of the tested pesticides were reduced by 59.8-98.4% during processing. The processing factor (PF) were different for each pesticide, but PFs were < 1 for all washing solvents and methods, and 0.06-1.40 when processed into jam. CONCLUSION: To ensure the consumption of pesticide-free strawberry, the most efficient washing method is to immerse the strawberry in fresh water for few minutes, followed by rinsing them under running water.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.201-210
• /
• 2017

BACKGROUND: The current study was to monitor of 9 veterinary antibiotics (ceftiofur, clopidol, florfenicol, sulfamethazine, sulfamethoxazole, sulfathiazole, tetracycline, tiamulin, and tylosin) in manure using liquid chromatography-tandem mass spectrometry (LC-MS/MS) in positive and negative electrospray ionization mode. METHODS AND RESULTS: Sample preparation was carried out using Mcllvaine buffer and citrate salts to adjust the pH of the sample followed by purification with dispersive solid phase extraction (d-SPE). Separation of analytes during LC-MS/MS analysis was conducted using an Eclipse Plus $C_{18}$ column and the mobile phase was in gradient mode with, 0.1% formic acid and 5 mM ammonium formate in methanol (A) and 0.1% formic acid and 5 mM ammonium formate in distilled water (B). The linearity of the matrix-matched calibrations of all tested antibiotics was good, with $R^2$ determination coefficients ${\geq}0.9920$. The limit of detection (LOD) and quantifications (LOQ) were $0.1-67.0{\mu}g/kg$ and $0.4-200.0{\mu}g/kg$, respectively. Analysis of 13 solid and liquid manure samples taken from the Republic of Korea revealed concentrations less than $0.7{\mu}g/kg$ for tiamulin, $1497.6{\mu}g/kg$ for sulfamethazine. CONCLUSION: To monitor 9 veterinary antibiotics from manure samples in 13 provincial areas throughout the Republic of Korea, an analytical method was developed. The developed method was fully validated and successfully applied for monitoring various veterinary antibiotics in manure samples.

• Journal of the Korean Society of Radiology
• /
• v.10 no.6
• /
• pp.403-409
• /
• 2016

MRI scan is a useful method in the diagnosis of musculoskeletal excellent contrast of the organization. Depending on the patient's musculoskeletal examinations state the type of aids provided the aid is used there is also challenging as well as the costs do not vary. This study was produced by the use of 3D printing technology, an MRI aids. Aids in the production process, then through 3D modeling and then convert stl files using (3D MAX.2014, Fusion360) slicing programs (Cubicreater 2.1ver., Cura 15.4ver) converted to G-code printed on the FDM scheme (Cubicon Style, output was MICRO MAKE). Output is, but in the FDM to evaluate the SNR on the MRI images were compared to the test is the case before use, and then to produce a Water Phantom case of a PLA, ABS, a TPU thickness 3mm, using aids before, It was evaluated in a clinical image after qualitatively. Obtaining an image of SNR Warter Phantom appeared to have been evaluated as T1 NON $123.778{\pm}28.492$, PLA $123.522{\pm}28.373$, ABS $124.461{\pm}25.716$, TPU $124.843{\pm}27.272$. T2 NON $127.421{\pm}26.949$, was rated as PLA $124.501{\pm}27.768$, ABS $128.663{\pm}26.549$, TPU $130.171{\pm}25.998$. The results did not show statistically significant differences. The use of assistive devices before and after images Clinical evaluation method palliative $3.20{\pm}0.88$, $3.95{\pm}0.76$ after using the aids used to aid improved the quality of the image. Production of the auxiliary mechanism using a future 3D printing is expected are thought to be used clinically, it can be an aid making safe and comfortable than the inspection of the patient is an alternative to improve the problems of the aids used in the conventional do.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.19-29
• /
• 2016

The purpose of this study is to analyze the combustion and thermal properties in order to establish baseline data for the fire safety evaluation of imported wood. The combustion properties such as heat release rate, total heat release, gas yield, and mass loss were analyzed by the method of cone calorimeter test according to KS F ISO 5660-1 and thermogravimetric analysis (TGA). Analyzed species are five kinds of species as Merbau, Mempening, Garo Garo, Malas, and Dillenia. The heat released rate values showed the highest value of Malas as $375.52kW/m^2$, and Dillenia showed the lowest value as $133.30kW/m^2$. The data values were confirmed in the following order: Malas > Mempening > Garo Garo > Merbau > Dillenia. In case of the total heat release, it was measured in the following order: Mempening > Malas > Garo Garo > Merbau > Dillenia. The gas analysis results were that Dillenia showed the highest value of 0.034. Also, Mempening and Malas showed the lowest at 0.020 in the $CO/CO_2$. Min of mass reduction was shown as 74.79% Sargent cherry, on the other hand, Malas had a 83.52%. It showed a correlation between and of the CO and $CO_2$ generation and combustion characteristics of wood. The thermal decomposition temperature of the wood in the TGA were as follow that Merbau $348.07^{\circ}C$, Mempening $367.57^{\circ}C$, Garo Garo $350.59^{\circ}C$, Malas $352.41^{\circ}C$, Dillenia $364.33^{\circ}C$. The aim of this study is to determine the combustion properties of imported wood according to ISO 5660-1. And, based on the results of this study, we would proceed with further research for improving the fire safety of wood for construction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.195-202
• /
• 1995

This experiment was performed to characterize the optimum water table level for the growth and yield of barley(var. Olbori) and wheat(var, Grumil), Olbori and Grumil were grown in the 550 liter plastic pot filled with silt loam or sandy loam, During the whole growth period, the water table adjusted to be 20, 30, 40, 50, and 70cm, Higher water table was resulted in the decrease in plant height and top dry weight, but in the increase of the ratio of top to root dry weight, especially in barley, This suggested that high water table level affected more the growth of top than that of root, The number and area of green leaves were decreased as the water table was higher than 30 to 40cm at the late growth period(May 18, 1993), The largest number and area of green leaves were shown at 50cm of water table in sandy loam and at 70cm in silt loam, As the water table was high, the leaf chlorophyll content was low, And barley was affected more significantly than wheat by soil texture, The photosynthetic activity was decreased remarkably at 20cm water table, Heading period was 2 to 3 and 4 days earlier at the 20cm water table of sandy loam in barley and wheat, respectively, However this earlier heading was not shown in silt loam, Grain filling was accelerated 5 to 7 days earlier in barley and 10 days in wheat grown at 20cm water table, The highest yield was present at 50 and 70cm water table, The yield was decreased remarkably at 20cm water table, resulting that yield reduction ratio of barley was 71.1% and 72, 2%, and that of wheat was 41.0% and 60, 0% in sandy loam and silt loam, respectively, High water table decreased the number of spike per unit area, but increased the seed weight per spike in barley, However, High water table reduced the seed weight per spike in wheat. There was significant correlation between yield and leaf chlorophyll content in wheat and barley, Yield was correlated significantly with green leaf area in barley, and with top dry weight, ratio of top to root dry weight chlorophyll content and photosynthetic activity in wheat. The optimum water table was 50 to 70cm in wheat and barley, They grew fairly well at 30cm water table of sandy loam, and at 40cm of silt loam.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.3
• /
• pp.279-287
• /
• 1994

To develop mixed pesticides of herbicide and topdressing fertilizer for paddy rice, twelve mixtures were formulated with combination of urea coated with different level of acrylic acid wax(AAW) and four herbicides, which were thiobencarb, pretilachlor, mefenacet + bensulfuron-methyl and mefenacet + bensulfuron-methyl + dymron, and effects of the mixtures for weed control, phytotoxicity and rice tillering were investigated in the laboratory and the field experiments. Release rates of active ingredient of herbicides in the distilled water were over 90% during 24 hours same as that of the reference herbicides. The release rates of nitrogen showed different patterns according to coated level of granular urea with acrylic acid wax. Optimum release rate of nitrogen as $NH_4-N$ was obtained by 5.5% AAW coating on urea for thiobencarb or pretilachlor mixture, and by 4.0% AAW coating on urea for mefenacet + bensulfuron-methyl or mefenacet + bensulfuron-methyl + dymron mixture. The pesticide active ingredients of the mixtures were stable, which showed $3.7{\sim}8.0%$ of degradation rate after 90 days of storage under $50^{\circ}C$. Effects on weed control of mixtures were acceptable for both annual and perennial weeds, while ACRI-M9213 mixture showed considerable phytotoxicity at double dose of standard. When treated the mixed pesticides to paddy rice, rice growth status including culm length, ear length, panicle number and polished rice yield exhibited no significant differences compared with the conventional treatment.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.388-394
• /
• 2014

BACKGROUND: Aclonifen is used as a systemic and selective herbicide to control a wide spectrum broad-leaf weeds by inhibition carotenoid biosynthesis, and then its MRLs(Maximum Residue Limits) will be determined in onion and garlic. In this study, a new official method was developed for aclonifen determination in agricultural products to routinely inspect the violation of MRL as well as to evaluate the terminal residue level. METHODS AND RESULTS: Aclonifen was extracted from crop samples with acetone and the extract was partitioned with dichloromethane and then purified by silica solid phase extraction(SPE) cartridge. The purified samples were detected GC using an ECD detector. Limits of detection(LOD) was 0.001 mg/kg and quantification(LOQ) was 0.005 mg/kg, respectively. For validation purposes, recovery studies were carried out at three different concentration levels (LOQ, $10{\times}LOQ$, $50{\times}LOQ$, n=5). The recoveries were ranged from 74.3 to 95.0% with relative standard deviations(RSDs) of less than 8%. All values were consistent with the criteria ranges requested in the Codex guidelines(CAC/GL 40). CONCLUSION: The proposed analytical method was accurate, effective and sensitive for aclonifen determination and it will be used to as an official method in Korea.

• Journal of Korean Society of societal Security
• /
• v.3 no.2
• /
• pp.65-71
• /
• 2010

This study was conducted to provide a method for fire suppression in a central area inside the roof of a wooden cultural property using a gas extinguishing apparatus, which is used as one of fire suppression methods with view to preventing valuable wooden properties inherited from ancestors from being destructed by fire. For a wooden property, it is very difficult to suppress fire when combustion spreads to a central area inside its roof, so it is impossible to put out a fire without destructing it. Such a fire fighting apparatus as a sprinkler, etc., installed in modern structures, is very effective, but the possibility of damaging a cultural property is highly probable after installment and operation, which leads to its low adaptability to a wooden property. Thus, the necessity of developing a fire suppress ion apparatus was raised to minimize the said problem and to obtain the desired results, and the need of making a plan on the installment was also raised based on the results of a test whose validity was proven. The central area inside a roof is a traditional - architectural style which is found in Korean wooden structures only, so it is impossible to discover similar cases in foreign countries. For this reason, this study was conducted to verify the effectiveness by developing a fixed fire suppression apparatus designed considering the speed and effectiveness in fire suppression. This study was sequentially carried out in the following steps. First, a frame for this study was made and the specific plan on a fire suppression method was established. Then, a fire suppression apparatus was installed. In the first step, the effectiveness for fire suppression was tested by installing valve open - punched - main water pores, and in the second step, the same effectiveness was tested by valve opened - punched - injection ports. For a wooden property similar to "Sungnyemun"(Gate of Exalted Ceremonies), its central area of the roof decides whether the fire suppression is successful or not, so the opinions on how to put out a fire were presented in this study, and thus the objective data to establish a method on fire suppression in a wooden structure(cultural property) was secured. Lastly, a scientific verification in the effectiveness for fire suppression measures was presented by installing a gas - fixed fire suppression apparatus.

• Journal of Life Science
• /
• v.22 no.6
• /
• pp.703-712
• /
• 2012

Adeno-associated virus (AAV) has been considered to be a very safe and efficient gene delivery system. However, the major obstacles to therapeutic usage of AAV have been to achieve highly efficient and reproducible production processes, and also to develop a reliable quantifying method of various serotypes with a simple protocol. We compared the efficiency of the conventional production protocol of AAV2 and adenovirus (Ad) co-infection to that of a new method containing AAV2 infection followed by pHelper transfection. We tested HEK293 and 293T, and further examined the time-dependent changes of AAV2 production. The new method of AAV2 and pHelper DNA gave about ten times higher production efficiency than that of the conventional protocol. The highest production efficiency in 293T was achieved as $1.61{\times}10^5$ virus genomes (v.g.)/cell by the new method of 10 MOI of AAV2 infection and 5 days post-infection. This protocol of the highest efficiency was then applied to produce various AAV serotypes and showed the efficiencies higher than $10^5$ v.g./cell. Next, we designed the universal PCR primers of highly conserved regions for various AAV serotypes to develop a simple and reliable titration method. The universal primers could amplify all the tested AAV serotypes with similar sensitivities by ten molecular copies. Therefore, this pair of universal primers can be further utilized to detect AAV contaminants in therapeutic adenoviral vectors.