• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.209-218
• /
• 2011

The present study proposes a new estimation relationship for the transmission rate of the steel breakwater which is expected to make up for the weakness points in existing hard solution for shore protection. The steel breakwater consists of the wave dissipator of the dual horizontal plates, the supporting columns and their foundations, and thus its respective designs should also be conducted one by one. Furthermore, the breakwater has to ensure both functions of shore protection and structure stabilization. The study produced experimental data for the stability and safety investigation of the steel breakwater. The forces acting on the steel breakwater were classified into two categories, one is vertical up and down loads for the pile resistance and the other was maximum difference of the vertical load acting on horizontally different position for the torsion. The study applied the stability force produced by the summation of maximum pressure at each point and the safety force acting on each point simultaneously. The regular wave corresponding to the significant wave was utilized for measuring wave pressure and force. The study showed the method for the proper position of submerged upper plate by considering occurrence frequency of tide level. The design process finally determined by trial and error is proposed in the present study.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.165-171
• /
• 2021

To prevent the secondary hospital-acquired infection (cross-infection) from occurring in the general radiographic room in the department of radiology, the microbial measurement was conducted at the points making direct close contact with radiologists and patients. For the case of radiologists, the microbial measurement and incubation were focused on the x-ray tube handle of the radiation generating device, and, for the case of patients, the microbial measurement and incubation were focused on the chin supporting device, chest-contact point, and handle. Once disinfected with Aniosurf, the sterilized media were gathered and identified, and the microorganisms were confirmed. Based on the identification results, it was confirmed that the points making direct close contact with radiologists showed a value of 103 CFU for Proteus mirabilis, Staphylococcus epidermidis, Bacillus spp. and Candida spp., and that the points making direct close contact with patients showed a value of 103~5 CFU for Proteus mirabilis, Enterococcu faecium, Pseudomonas aeruginosa, NTM(Non-Tuberculosis Mycobacteria) and Candida spp.. It was also confirmed that the types and number of microorganisms gathered from the points making direct close contact with patients were greater. Fortunately, most of the involved microorganisms were observed to be on the skin surface and are known to become extinct when disinfected in accordance with the hospital-acquired infection control rules. However, since even minor exposure to such microorganisms may be lethal for patients with reduced immunity, caution must be taken. In particular, since the points making contact with patients showed a high level of microbial measurement, it was thought that it would be necessary for radiologists and personnel having frequent access to strictly disinfect the parts, such as instruments and handles, making frequent contact with patients. The purpose of this study was to announce the importance of safe microbial control in the radiographic inspection room in hospital, and this study is expected to be used as the baseline data for preventing hospital-acquired secondary infection and Nth infectious diseases.

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.125-157
• /
• 2019

Technological advancement and demand of sUAS (small Unmanned Aircraft System)are rapidly growing, which makes the current legal system unable to follow. Currently, Aviation Security Act and its subordinate law exclude the registration and certification for non-commercial purpose sUAS weighing less than 12kg. Despite this sUAS being the most popular model for consumer, there is no way to regulate them legally. When there is sUAS crash accident, the operator legally responsible for the occurrence damage cannot be identified. It has been an issue for a long time with the concrete classification and registration of sUAS, but it has not been introduced yet. It is obvious that damages caused by sUAS will be transferred not only to operators but also to third parties. Discussions on liability insurance for these sUAS are actively being held. But first, it is necessary to identify who will be responsible for the damage caused by the sUAS. In other words, even with the liability system established, without clarified operator the damage occurred cannot determine who is responsible. According to the cases of America and Germany, they have enforced the law of registration and identification obligated to 200g or 250g sUAS. Therefore, it is necessary to prepare regulations on concrete classification and registrations to identify for noncommercial purpose sUAS as soon as possible in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.638-644
• /
• 2019

In this study, the fluid flow and heat transfer characteristics within sandwich panels are investigated using computational fluid dynamics. Within the sandwich panels having periodic cellular cores, air can freely move inside the core section so that the structure is able to perform multi-functional roles such as simultaneous load bearing and heat dissipation. Thus, there needs to examine the thermal and flow analysis with respect to design variables and various conditions. In this regard, ANSYS Fluent was utilized to explore the flow and heat transfer within the pyramidal truss sandwich structures by varying the truss angle and inlet velocity. Without the entry effect in the first unitcell, the constant rate of pressure and the constant rate of Nusselt number was observed. As a result, it was demonstrated that Nusselt number increases and friction factor decreases as the inlet velocity increases. Moreover, the rate of Nusselt number and friction factor was appreciable in the range of V=1-5m/s due to the transition from laminar to turbulent flow. Regarding the effect of design variable, the variation of truss angle did not significantly influence the characteristics.

• Journal of the Korean Society for information Management
• /
• v.36 no.3
• /
• pp.81-107
• /
• 2019

The purpose of this study is to assert the justification for actively accepting media education in Library and Information Science and to suggest the media type according to the concept and classification criteria of the media from the perspective of Library and Information Science. In order to present the media type according to the concept of the media, the dictionary concept of the media was reviewed, the language and media for high school students in Korean language, the educational materials for elementary and secondary school students written by Media Education Committee of Korean Society for Journalism & Communication Studies, the educational textbooks for elementary and secondary school students in Library and Information Science, and media classification presented in the RDA of the cataloging rules were analyzed. In addition, the implications were derived based on the analysis results of the concepts and media type. The concept of media was set based on the analysis results and implications, and the media types were presented according to the concepts and classification criteria. In this study, the media was set up in the same meaning as the medium, and it was defined that the media function as a means of communication and that information contained in it can be obtained through the human sensory apparatus through physical objects that contain, transmit or reproduce information. The media was set up as three logical components of the media in this study: information in the media, materials, and representation devices.

• The Korean Journal of Archival Studies
• /
• no.35
• /
• pp.93-132
• /
• 2013

It is principle that the National Assembly Minutes are open to the general public based on the Constitution of the Republic of Korea. However, it will not be released to the public when the minutes are produced at a meeting held privately -the closed minutes- and the parts of the minutes are not published because of 'the demands on keeping confidential of the Chairman of the National Assembly or needs for the National Security' based on the National Assembly Act article 118 clause 1. These two minutes infringe the democratic rights, the public's rights to know seriously by reason that there are no procedures to disclose to the public. Especially the non-published parts of the minutes are highly likely in breach of the constitution. This paper will deal with the regulations and guidelines related to the disclosure of the closed minutes focusing on the United States and the United Kingdom where developing countries on the parliamentary democracy. Then, it is suggested placing an emphasis on the legal aspects that the plans to make public of the closed minutes and non published parts of the minutes based on the reviewed results of the committee of the National Assembly Archives and the initiative proposed by the member of the National Assembly, Jung Chang-rae in the last 2004.

• The Korean Society of Law and Medicine
• /
• v.22 no.3
• /
• pp.97-124
• /
• 2021

In medical institutions, there are radiation-related workers such as radiological technologists, physicians, dentists, and dental hygienists who handle diagnostic radiation generators. Also, there are work assistants, such as nurses and assistant nurses, who assist in radiation treatment or transfer patients to the radiation examination room. Radiation exposure management for radiation-related workers is carried out under the 「Medical Service Act」, but there is no legal basis for work assistants, etc. And the management of radiation exposure for diagnosis is regulated by the 「Medical Service Act」, and the management of radiation exposure by therapeutic radiation and nuclear medical examination is governed by the 「Nuclear Safety Act」. Thus, to improve the management of radiation exposure for diagnosis, the regulations on radiation exposure management for diagnosis under the 「Medical Service Act」 were compared and reviewed with those of the 「Nuclear Safety Act」. As a result, the main contents are as follows. First, it is necessary to legislate to include nurses, assistant nurses, and clinical practice students who are likely to be exposed to radiation besides radiationrelated workers as subjects of radiation exposure management for diagnosis. Second, when a radiation-related worker for diagnosis is confirmed to be pregnant, the exposure dose limit should be defined. Third, it is necessary to revise the regulations on the types of personal exposure dosimeters in the 「Rules on the Safety Management of Radiation Generators for Diagnostics」. Fourth, it seems that health examination items for radiation-related workers, radiation workers, and frequent visitors should be the same. Fifth, It is necessary to unify and regulate diagnostic radiation and all medical radiation, including therapeutic radiation and nuclear medicine, in one legal system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.403-421
• /
• 2021

Most of the urban tunnels in Korea, which are represented by the 1st to 3rd subways, use the drainage tunnel by NATM. Recently, when a construction project that actively utilizes large-scale urban space is promoted, negative effects that do not conform to the existing empirical rules of urban tunnels may occur. In particular, there is a high possibility that groundwater fluctuations and hydrodynamic behavior will occur owing to the practice of tunnel technology in Korea, which has mainly applied the drainage tunnel. In order to solve the problem of the drainage tunnel, attempts are being made to control groundwater fluctuations. For this, the establishment of tunnel groundwater management standard concept and the analysis of the tunnel hydraulic behavior were performed. To prevent the problem of groundwater fluctuations caused by the construction of large-scale tunnels in urban areas, it was suggested that the conceptual transformation of the empirical technical practice, which is applied only in the underground safety impact assessment stage, to the direction of controlling the inflow in the tunnel, is required. And the relationship between the groundwater level and the inflow of the tunnel required for setting the allowable inflow when planning the tunnel was derived. The introduction of a tunnel groundwater management concept is expected to help solve problems such as groundwater fluctuations, ground settlement, depletion of groundwater resources, and decline of maintenance performance in various urban deep tunnel construction projects to be promoted in the future.

• Journal of Korea Water Resources Association
• /
• v.54 no.11
• /
• pp.849-862
• /
• 2021

Laws, administrative rules, and task manuals have been revised to build a modern river maintenance system in Korea for the last decade. And various researches and technology developments have been carried out to resolve related issues. However, the recent enactment of the new Act and the catastrophe of flood damage in 2020 have accelerated more emphasis on the reorganization and reinforcement of the river maintenance system in terms of political and social aspects. In this study, we suggested promising directions for strengthening the technical and institutional competencies of river maintenance with respect to policy, R&D, planning, and technology. The open discussion was held with the participation of industry, academia, research institutes, and government officials, and all participants conducted the related survey to collect their opinions effectively. These results are expected to be used as a reference to secure the justification for integration of government organizations, planning of R&D, the introduction of new river maintenance, and related technology development when reestablishing and reinforcing the river management system in the future.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.1-15
• /
• 2024

The construction of smart communities is a new method and important measure to ensure the security of residential areas. In order to solve the problem of low accuracy in face recognition caused by distorting facial features due to monitoring camera angles and other external factors, this paper proposes the following optimization strategies in designing a face recognition network: firstly, a global graph convolution module is designed to encode facial features as graph nodes, and a multi-scale feature enhancement residual module is designed to extract facial keypoint features in conjunction with the global graph convolution module. Secondly, after obtaining facial keypoints, they are constructed as a directed graph structure, and graph attention mechanisms are used to enhance the representation power of graph features. Finally, tensor computations are performed on the graph features of two faces, and the aggregated features are extracted and discriminated by a fully connected layer to determine whether the individuals' identities are the same. Through various experimental tests, the network designed in this paper achieves an AUC index of 85.65% for facial keypoint localization on the 300W public dataset and 88.92% on a self-built dataset. In terms of face recognition accuracy, the proposed network achieves an accuracy of 83.41% on the IBUG public dataset and 96.74% on a self-built dataset. Experimental results demonstrate that the network designed in this paper exhibits high detection and recognition accuracy for faces in surveillance videos.