• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.298-299
• /
• 2001

안경렌즈는 유리를 연마하여 제작하거나 단량체를 세라믹 금형에 넣어 캐스팅공법으로 플라스틱 렌즈를 만드는 것이 일반적인 방법이었다. 한편 사출성형에 의한 렌즈 및 안경의 제작은 광학적으로 우수한 재료 및 금형을 개발하지 못하여 국내에서는 시도조차 못하는 형편이다. 구미나 유럽의 일부 국가는 PMMA 및 PC를 이용하여 안경 및 안경렌즈를 개발하고 있으며, 이는 공정을 대폭 줄이기 때문에 대량 생산 및 원가 절감을 이룩할 수 있다. 본 연구에서는 PMMA 및 PC를 이용하여 그동안 성형할 때에 가장 문제가 되었던 오목 렌즈를 제작하기 위한 근본적인 금형 설계의 문제점 해결과 이를 이용한 일체형 안경과 고강도 렌즈의 제작을 고찰하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.145-148
• /
• 2001

SiC composites were developed by incorporating glass phase into SiC, in the light of improving mechanical properties of material for spectacle lens cutting. Specimens for spectacle lens cutting with glass phase as sintering additives have been fabricated by hot-pressing at $1810^{\circ}C$ for 2 hr under a pressure of 25 MPa. The fracture toughness and hardness of hot-pressed specimens were characterized and compared with previous works. Typical hardness and fracture toughness of materials for spectacle lens cutting were 12 GPa and $5.1MPa{\cdot}m^{1/2}$ respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.3
• /
• pp.1-5
• /
• 2009

Purpose: The aim of this study is to grasp domestic eyewear trends in 2008 with analyzing brands, types, materials, colors and styles of new eyewear products. Methods: Examined all new eyewear products which were on three magazines related with eyewear published in Korea; "안경계", "Eye 11" and "THE AXIS". Results: There are 103 companies, 182 brands in 3 magazines related eyewear published in 2008. There are 77 domestic brands and 105 imported brands, and there are 522 eyeglasses and 126 sunglasses. Material of eyeglasses make up 37.93% of combination frames, 33.14% of metal frames and 28.93% of plastic frames and material of sunglasses make up 50.79% of plastic frames, 30.95% of combination frames and 18.25% of metal frames. From a style point of view, there are lots of retro and casual styles which one can express one's individuality with. In terms of colors, basic colors such as black and gray are mainstream and pastel tones and vivid tones are mainly used as the point color. Conclusions: The results of analyzing new eyewear products show that many light and feeling good products such as thin plate frames, TR frames and thin plate-TR combination frames were released in case of domestic eyewear products. In case of imports, there are lots of simple Ti frames and acetate frames which were variety patterns and colors.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.25-27
• /
• 2002

To improve the properties of materials for spectacle lens cutting. AIN was included as a sintering additive. The amount of AIN was 0, 1, 3, 5 wt% and materials for spectacle lens cutting were fabricated by hot-pressing at $1830^{\circ}C$ for 2h. Microstructure was consisted of equiaxed SiC and elongated TIC. Typical fracture toughness and hardness of materials for spectacle lens cutting with AIN $4.8MPa{\cdot}m^{1/2}$ and 15.3 GPa, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.207-210
• /
• 2000

The SiC-TiC composites materials for glasses lens cutting were fabricated by hot-pressing and annealing. The amount of TiC was 0, 10, 20, 30wt% in the mixture of ${\beta}-SiC$. The microstructure of materials for glasses lens cutting was very dependent on the TiC amount. The introduction of larger amount of TiC improved fracture toughness, optical microscope and XRD analysis of the surface of samples were carried out. An in situ-toughened microstructure, consisted of distributed elongated SiC, matrix like TiC grains was developed by using ${\beta}-SiC$. Typical hardness and fracture toughness of materials for spectacle lens cutting were 14.9 GPa and $5.7MPa{\cdot}m^{1/2}$, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.111-114
• /
• 2001

This paper presents the influence of the additive composition on flexural strength and hardness of SiC-TiC composites materials for spectacle lens cutting materials. The materials were hot-pressed at $1800^{\circ}C$ and subsequently annealed at $1910^{\circ}C$ for 3h. The heating rate was $15^{\circ}C/min$ and the cooling rate about $25^{\circ}C/min$ in from the sintering temperature to $1300^{\circ}C$. The growth of particles of spectacle lens cutting materials was analysed by SEM and crystalline phases were discussed by x-ray diffractometry. Typical fracture toughness and hardness of materials for spectacle lens cutting were $6.1MPa{\cdot}m^{1/2}$ and 14.9 GPa, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.2
• /
• pp.19-23
• /
• 2007

An investigation of the effects of CaO on microstructure and properties of SiC materials for spectacle lens cutting was described. Four materials with different composition have been fabricated by hot-pressing at $1,880^{\circ}C$ for 4h using CaO. SEM analysis and XRD of the surface of samples were carried out. Typical fracture toughness of materials for spectacle lens cutting was $5.4MPa{\cdot}m^{1/2}$. Also, The hardness of materials for spectacle lens cutting was relatively dependent on the density.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.13-17
• /
• 2008

Purpose: Study the method to attach to traditional pattern for the demands of eyeglasses' function which is becoming extended to cultural psychological and social aspects. Methods: To understand the symbolic characteristic of traditional pattern, especially through using palmette, embroidery, and practicing it on glasses' temple and cleaner. Results: Globalization stimulates crossing-consumption cultural trend rapidly. Thus, new glasses pattern involving Korean ethnic feature is a new source that could well adapt to this tendency. This report presents new aspect which corresponds to the demand of modern consumers. By modernizing Traditional pattern and method, we could discover the cultural value of glasses design. Conclusions: Glasses imply social position of users and became a measure that reveal a part of style that presents modern psychological language. Thus, the glasses design using traditional pattern makes a chance to change the beauty sense from western style to oriental one. And it achieves the desire of cultural consumption through glasses design.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.4
• /
• pp.33-37
• /
• 2009

Purpose: To examine the coloring condition of titanium spectacle frames with various colors by using anodization method. Methods: We made an anodization coater. Platinum plate with $3{\times}3cm^2$ was used for a cathode and titanium spectacle frame specimens was mounted on an anode in an electrolyte. An electric source device were designed to supply steady state current. The color of the coated spectacle frame specimens were measured by a spectrophotometer equipped with an integrating sphere. We use CIE $L^*a^*b$ color system as chromaticity coordinates. Results: The thickness of $TiO_2$ of titanium spectacle frame specimens was varied as controlling current flow time for electrodes. The specimens with various kinds of color as a walnut, a yellow brown, a navy blue, a blue, a light blue, a mung bean, a yellowish green, a light purple, a purple, a flower pink, a bluish green, an emerald, and a green color etc. were obtained. The values of CIE $L^*a^*b^*$ for these specimens were measured and analyzed to be changed clockwise in chromaticity coordinates as the thickness of $TiO_2$ increases. Conclusions: We identified the coloring mechanism by anodization method in titanium spectacle frame specimens.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.28-28
• /
• 1997