• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.107-113
• /
• 2010

In this study, the relative effects of low-chloride deicier(LCD) and two other deicing agents on the scaling of concrete were conducted in a series of tests at laboratory accordance with the ASTM C 672. The solutions concentration of deicers tested included 1, 4, 10%. Tap water was used as control. The amount of scaling was evaluated gravimetrically. As test result of deicer solution types, when applied to 4% solutions, surface scaling of concrete after 56 freeze-thaw cycles was produced significantly as about 9 times on LCD solution, as about 18 times on $CaCl_2$ solution, and as about 33 times on NaCl solution comparing with tap water. As test result of deicer solution concentrations, relatively low concentrations (of the 4% by weight) of deicer were produced more surface scaling than higher concentrations (of the 10% by weight) or lower concentrations (of the 1% by weight) of deicer. It show that the damaging concentration is of the order of 3~4% for previous research result. It appears that the mechanism of surface scaling is primarily physical rather than chemical. Also, the effect of chloride deicier types, freeze-thaw cycling, and air contents on the performance of concrete was experimentally investigated. The results show that the concrete specimens subjected to freeze-thaw cycling scaled more severely in exposure to deicing salt than those in non-exposure to deicing salt, weight losses of the specimens tested in exposure to deicing salt were twice as much as those tested in non-exposure to deicing salt. Relative dynamic modulus of elasticity of concrete specimens decreased more quickly in exposure to deicing salt than in non-exposure to deicing salt. Also, relative dynamic modulus of elasticity of concrete specimens in exposure to sodium chloride deicing salt was decreased more quickly comparing with exposure to LCD salt. It is also shown that the chloride contents according to concrete specimen depths was more largely in exposure to LCD salt. When concrete specimen is exposed to chloride deicing salts and freeze-thaw cycling, performance degradation in the entrained air concrete(AE concrete) retarded more considerably comparing with non-entrained air concrete(Non-AE concrete).

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.419-424
• /
• 2021

This study investigated the possibility of early determination of frost damage on the concrete surface by using the rebound hardness method, widely used for estimation the compressive strength of concrete on the site. For this purpose, the surface damage of concrete was compared by measuring the rebound hardness and the relative dynamic modulus of the concrete for the multi-sided and single sided concrete surface exposed to freeze and thaw condition. Compared to the resonance vibration method, the rebound hardness method was able to show the frost damage 150 cycles quicker for the single-sided exposed concrete specimen and 50 cycles quicker for the multi-sided exposed concrete specimen. Therefore, it is considered that the rebound hardness method can determine the concrete surface damage more quickly than that of the resonance vibration method.

• Journal of Digital Contents Society
• /
• v.18 no.5
• /
• pp.943-948
• /
• 2017

Currently, embedded systems designed for specific applications are used extensively in consumer electronics, smart phones, autonomous vehicles, robots, and plant control, etc. In addition, the importance of DRAM, which has a great influence on the performance of an embedded processor constituting an embedded system, has been increasing day by day, and research on DRAM has been actively conducted in industry and academia. Therefore, it is important to have a more accurate DRAM model in order to obtain reliable results when evaluating the performance of an embedded processor through simulation. In this paper, we developed an embedded processor simulator capable of interworking with a DRAM simulator. We also analyzed the influence of the DRAM model, which operates correctly on a cycle-by-cycle basis, on the performance of the embedded processor by using the MiBench embedded benchmark.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.177-183
• /
• 2018

Currently, digital signal processing systems are used extensively in image processing, audio processing, filtering, and equalizations, etc. In addition, the importance of DRAM, which has a great influence on the performance of an digital signal processor has been increased, making research on DRAM actively conducted in industry and academia. Therefore, it is important to have a more accurate DRAM model in order to obtain reliable results when evaluating the performance of a digital signal processor through simulation. In this paper, we developed a digital signal processor simulator capable of inter-working with a DRAM simulator. With the simulator, we analyzed the influence of the DRAM model which operates correctly on a cycle-by-cycle basis, on the performance of the digital signal processor by using the UTDSP digital signal benchmark.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.203-208
• /
• 2017

Recently, the importance of DRAM is very significant in multicore processors which are widely used in computers, laptops, tablet PCs, and mobile devices. To keep up with this, both industry and academia have actively studied various types of future DRAMs. Therefore, accurate DRAM model is requisite when evaluating the multicore processor performance. In this paper, a multicore processor trace-driven simulator which can couple with the cycle-accurate DRAM simulator has been developed. Using SPEC 2000 benchmarks as input, the effect of cycle-accurate DDR3 model on the multicore processor performance has been evaluated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.674-681
• /
• 2006

In this paper, a new receiver with low complexity for a DS-UWB system which can eliminate efficiently the multiple access interference and the detrimental effects caused by multi-paths is proposed. The performance of conventional DS-UWB receivers depends greatly on the types and lengths of spreading codes. Generally, as the length of spreading codes increases, the receiver performance improves. But, the receiver performance does not improve satisfactorily in a multi-paths fading environment. Through computer simulations, it can be shown that the proposed DS-UWB receiver eliminate the multi-paths effects efficiently in a multi-user, multi-paths fading environment, and the user capacity can be increased dramatically using the proposed receiver.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1343-1354
• /
• 2007

Secondary batteries become more important in our lives as the use of portable electric devices, such as camera, cellular phone, laptop, etc. Especially, because of their high energy densities and high voltage, lithium-ion batteries are being used in many systems. For the optimum design of such systems which include lithium-ion batteries, virtual prototype is required generally. However, since the complex chemical and physical processes are involved, the behavior of battery becomes harder to be predicted compared with that of electric and mechanic devices. This paper, proposes a new static model of lithium secondary battery, which accounts for nonlinear equilibrium potentials, rate and temperature dependencies, thermal effects, lifetime characteristic. The results of the simulation of the model are analysed and compared with experimental data to inspect their validity.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.1
• /
• pp.125-137
• /
• 2009

Smart card has a small sized micro computer chip. This chip contains processor, RAM, ROM, clock, bus system and crypto-co-processor. Hence it is more expensive, complicated and secure chip compared with RFID tag. The main application area of smart card is e-banking and secure communications. There are two kinds of smart card platforms; open platform and closed one. Java card is the most popular open platform because of its security, platform independency, fast developing cycle. However, the speed of Java card is slower than other ones, hence there have been hot research topics to improve the performance of Java card. In this paper, we propose an efficient transaction buffer management to improve the performance of Java card. The experimental result shows the advantage of our method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.219-224
• /
• 2017

Recently, the importance of DRAM is very significant not only in embedded systems and mobile devices but also in high-end modern microprocessors and multicore processors. To keep up with this, both industry and academia have actively studied various types of future DRAMs. Therefore, accurate DRAM model is requisite when evaluating the microprocessor performance. In this paper, a microprocessor trace-driven simulator which can couple with the cycle-accurate DRAM simulator has been developed. Using SPEC 2000 benchmarks as input, the effect of cycle-accurate DDR3 model on the microprocessor performance has been evaluated.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.192.2-192.2
• /
• 2016

최근 차세대 휴대용 전자기기나 전기자동차의 상용화 연구가 활발히 이루어짐에 따라 리튬이온 배터리가 주력 에너지 저장장치로써 활발히 개발되고 있다. 이러한 리튬이온 배터리의 음극 물질로써 주로 탄소재료가 많이 사용되어 왔지만 낮은 이론용량 (372 mAh/g)으로 인하여 좀더 높은 용량을 가지는 금속이나 합금 등이 주목을 받게 되었다. 그 중에서도 주석이 탄소재료에 비해 3배 정도 높은 이론 용량 (993 mAh/g)을 가지고 있어 많은 연구가 진행되고 있다. 하지만 주석의 경우 리튬이온 배터리의 충방전 과정 중에 급격한 부피 변화가 발생하여 음극이 손상되고 이에 따라 용량이 급격하게 감소하는 한계점이 있다. 이 한계를 극복하기 위한 많은 방법들 중 하나가 구리-주석 합금을 음극으로 사용하는 것이다. 구리는 비활성 금속으로 충방전 중의 부피 변화에 완충제 역할을 하고, 연성과 전기전도성이 있어서 배터리의 전기화학적 성능 또한 향상시켜 준다. 이에 따라, 본 연구에서는 주석이 풍부한 구리-주석 합금 도금을 통하여 구조적으로 튼튼한 리튬이온 배터리의 음극을 만들었고 그 성능을 확인하기 위하여 반쪽전지 실험을 통하여 500회 충방전 동안의 싸이클 특성 및 효율을 확인하였고 순환전압전류 실험 또한 진행하였다.