• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.509-518
• /
• 2002

The purpose of this study was to evaluate the bonding of compomer to deciduous dentin which is known to have been developed to improve the weak properties of glass ionomer cement and composite resin. 120 sound primary molars were used for the shear bond strength test and another 24 for the scanning electron microscopic evaluation. Each material was ailed into polyethylene mold attached to exposed dentinal surface($3{\times}4mm$ in diameter) of sample blocks. Shearbond strength was measured using Universal testing machine and data were analyzed statistically with Oneway-ANOVA and Scheffe test. Scanning electron microscopic observation was performed in order to evaluate the pattern of distribution and penetration of resin tags and hybrid layer. Compomer groups(II-V) showed significantly higher bond strength values than glass ionomer group(I)(p<.05). Etching-compomer groups(III, V) showed the significantly higher bond strength than non-etching compomer groups(II, IV)(p<.05), but slightly lower values than composite resin group(VI) with no statistically significant difference(p>.05). No significantly different bond strength was found between compomer groups of different bonding system(p>.05). Scanning electron micrographs showed more irregular distribution of short and thin resin tags in non-etching compomer groups(II, IV) whereas the more regular and intimate distribution of long and thick tags in etching compomer groups(III, V) and composite resin group(VI). The evaluation of hybrid layer also showed more regular formation of thicker layer in etching compomer groups(III, V). Based on the results of present study, the use of compomer as an esthetic restorative material for primary molars might be justified.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2014

There are several treatment options for rehabilitation of partial edentulism including the use of conventional or implant-retained fixed prostheses. However, such prosthetic options cannot always be possible because of compromised general and oral health (i.e. loss of supporting tissues, medical reasons, extensive surgical protocol and osseointegration failure of dental implant) as well as the affordability of patients. In some cases, removable partial denture provides easier access for oral hygiene procedures and the ability to correct discrepancies in dental arch relationships than implant fixed prosthesis. Recently, Implant Supported Removable Partial Denture (ISRPD) where to place dental implant in strategic position has been suggested to improve the limitation and shortcomings of conventional RPD. ISPRD can overcome mechanical limition of conventional RPD by placing implant in a favorable position and can be cost-effective, prosthetic solution for partially edentulous patients who are not immediate candidates for extensive, fixed implant supported restorations. Incorporation of dental implants to improve the RPD support and retention and to enhance patient acceptance should be considered when treatment planning for RPD. In this case, 59 years old male patient who received dental treatment of implant fixed prosthesis on both side of the upper jaw and implant overdenture on lower jaw showed implant abutment screw fracture on #15i and osseointegration failure on multiple number of implants. After removing failed implants, we planned ISRPD using #15i,24i,25i,26i and #23 natural tooth for RPD abutment. We fabricated #23 surveyed crown,#24i=25i=26i surveyed bridge and #15i gold coping for support,retention and stability for RPD. Periodic follow up check for 2years has been performed since the ISRPD delivery to the patient. No sign of screw loosening, fracture or bone resorption around abutment implants were detected.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.291-299
• /
• 2011

Purpose: This study was designed to measure patient satisfaction and oral health-related quality of life and to assess an association between patients' satisfaction and oral health-related quality of life after implant surgery by using structural equation modeling. Materials and methods: A total of 257 participants who visited 6 dental clinics located in Daegu city for the purpose of implant treatment participated in this study. Six months after completion of implant surgery, the patients' satisfaction and oral health-related quality of life were surveyed. The effect of factors associated with patients' satisfaction such as functions and aesthetics, maintenance and cost on oral health-related quality of life after implant surgery was analyzed using AMOS 4.0. Results: Oral health-related quality of life was improved in all dimensions of OHIP-14 after implant surgery. Functions and aesthetics as well as maintenance had a significant effect on oral health-related quality of life (P<.05), while cost was not a critical factor influencing oral health-related quality of life. Conclusion: High satisfaction with functional aspects and maintenance aspects significantly affected good quality of life. The result of this study supported the fact that education and management for patients after implant therapy were positively related to good quality of life based on a theoretical model.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.4
• /
• pp.338-345
• /
• 1993

Mandibular discontinuity defect due to benign tumor, malignant tumor, infection, or truma results in major esthetic and biologic compromise. The primary goal of reconstruction is full restitution of function, which secondarily lead to normalization of the cosmetic deformity. The authors make a clinical study of 61 consecutive bone graft cases for mandibular reconstruction of discontinuity defect which were studied retrospectively using clinical data and radiographic findings. The cases were reviewed to evaluate the clinical success in the period from 1981 to 1990 in the Dept. of Oral & maxillofacial Surgery, Seoul National University Hospital. The criteria of the success in bone graft, are no residual infection, graft in with maintain its integrity, and remain over a half of its original size of graft in the radiographic features. The purpose of this clinical survey is to study of the mandibular discontinuity defects and success rate of free bone graft in mandibular defects. To summarize the clinical study of free bone graft, the main type of autogenous bone graft is iliac bone and corticocancellous type. Overall success rate is 80.3% in 61 followup cases over 6 months. Wire fixation and Extraoral approach has realtively better prognosis than other methods. It showed relatively poor prognosis in symphysis defects than other recipient site.

• Restorative Dentistry and Endodontics
• /
• v.29 no.1
• /
• pp.30-35
• /
• 2004

치아 미백술은 치아의 심미성을 향상시키는 가장 보존적인 방법의 하나로 인식되어져 왔으며 최근의 심미치과에 대한 관심의 증가와 함께 그 빈도가 급격히 증가하고 있는 술식의 하나이다. 일반적으로 치아 미백술 후 바로 접착수복을 할 경우 결합력이 감소하는 것으로 알려져 있으며 이를 해소하기 위해 일정시간 경과 후 접착수복 술식을 시행할 것을 권장 하고 있다. 자가산부식형 (self-etching primer system) 접착제는 기존의 접착제와 다른 성분으로 인해 치아미백제에 의한 영향에 대해 잘 알려져 있지 않은 상태이다. 이에 본 실험에서는 미백술을 시행한 법랑질 상에서 서로 다른 세 가지의 접착 시스템을 이용하여 미백술 후의 지연 시간이 결합력에 미치는 영향을 비교하고자 하였다. 발거한 대구치 68개를 물기가 있는 상태에서 근원심으로 절단하고 치관부를 자가중합 레진에 식립하여 시편을 제작하였다. 세 가지 접착제로 $One-step^{\circledR}$, Clearfil SE Bond $primer^{\circledR}$, One-up Bond $F^{\circledR}$를 이용하였다. 각 접착제를 미백을 시행하지 않는 대조군과 미백 시행 후 바로 접착한 즉시 접착군, 그리고 2주간 생리식염수에 보관한 후에 접착한 지연군으로 나누어 총 9개의 실험군으로 나누었다. 접착제를 처리한 면에 Clearfil $AP-X^{\circledR}$ 복합레진을 2mm충전하고, 40초간 광중합을 시행하였다. 24시간 후 전단접착강도를 측정하였으며, 그 결과는 다음과 같이 나타났다. $One-step^{\circledR}$의 경우, 즉시 접착군에서 지연 접착군보다 유의성 있게 낮은 접착강도를 나타내었다. Clearfil SE $Bond^{\circledR}$의 경우, 즉시 접착군과 미백을 시행하지 않은 군간에는 접착 강도에 유의한 차가 없었으나,지연접착군에서는 낮은 강도를 나타내었다. One-Up Bond F$^{\circledR}$의 경우, 즉시 접착군에서 유의성 있게 낮은 전단접착강도를 나타내었고, 전반적인 접착 강도가 다른 두 접착제에 비해서 유의성 있게 낮은 값을 보였다. $One-step^{\circledR}$을 사용할 경우 지연접착을 하는 것이 추천되며, Clearfil SE Bond$^{\circledR}$의 경우에는 즉시 접착을 시행하더라도 영향을 적게 받는 것으로 나타났으며, One-Up Bond $F^{\circledR}$의 경우 미백술 후 접착수복 과정에 사용에 제한이 있는 것으로 나타났다.

• The korean journal of orthodontics
• /
• v.32 no.3 s.92
• /
• pp.195-207
• /
• 2002

Numerous studies have revealed the similarities and discrepancies in two divisions of class II malocclusion, since these malocclusion groups have been postulated to be disparate criterion, much as classified under one diagnostic umbrella. This study was undertaken to describe the craniofacial configurations of class II division 1 and 2, and consequently to discriminate the morphologic differences between the two malocclusion groups in Korean sample. Lateral headfilms of 34 class H division 1 and 29 division 2 were employed, while those of 142 adults of normal occlusion served as a control. The landmarks were digitized and 26 variables were statistically analyzed for one way ANOVA. 1. There manifested no statistically significant difference in maxillary position anteroposteriorly. Normal occlusion group exhibited most anteriorly positioned mandible, whereas class II division 1 showed the most retroposition. Class II division 1 disclosed clockwise rotation tendency of mandible, which resulted in position of the chin Posteriorly. 2. Class II division 1 showed greater in SN to MP, SN to PP significantly than other groups. 3. Class II division 2 showed smaller genial angle and larger mandibular body length than other groups. 4. Class II division 1 revealed greater anterior lower face height than other groups, whereas division 2 dictated significantly greater posterior face height. 5. Class II division 2 expressed the most retroclined lower incisor, while division 1 manifested the most proclination. The largest interincisal angle resided in Class II division 2 group. There were no significant differences in upper molar position anteroposteriorly.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.10 no.1
• /
• pp.43-46
• /
• 2014

Cerebral Palsy is a genetic term referring to abnormalities of motor control caused by damage to a child's brain early in the course of development. Due to the impairment of balanced perioral muscle development, the prevalence of malocclusions in patients with cerebral palsy such as maxillary protrusion is high. But most clinicians may feel uncomfortable to treatment of these problems. Here a case report about mitigation of maxillary anterior teeth protruded in patient with cerebral palsy. 8y 4m old boy who have cerebral palsy visited our dental hospital. He showed severely protrusive maxillary anterior teeth with mouth breathing and could not close his mouth. He and his mother wanted to improve dental and facial esthetic problem. Specially designed or modified intraoral fixed appliance and rubber elastic chain was used in the therapy. Treatment carried out for 8 months and we could observe maxillary incisor angle was improved and mouth breathing habit was stopped. In conclusion, modified fixed appliance therapy for the patients with cerebral palsy might be useful. Continuous rehabilitation training of lips should be followed after treatment to correct imbalance of muscle tone.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.10 no.2
• /
• pp.84-88
• /
• 2014

Traditional method of pulpectomy for a necrotic primary anterior tooth was done on lingual side. But it could not recover the discoloration of crown effectively. For the purpose of treating the discoloration of crown after lingual pulpectomy, additional methods of crown restoration were needed like : celluloid crown, open-faced crown, rasin-faced crown. Neverthless, these kinds of complete coverage methods had some disadvantages such as possibility of tooth fracture by increased tooth preparation. In order to overcome the shortcomings of lingual pulpectomy, labial treatment could be considered as an alternative. It is a method that treats necrotic pulp through the labial access opening. After finishing the pulp treatment, discolored labial tooth structure was removed extending from access opening. Discoloration of deep area could be masked effectively using opaque sealant. Cavity on labial side was restored with composite resin. This labial approach method has several advantages. First, it gives a direct vision for effective pulp treatment which is also very useful for children with poor behavior. Second, most of lingual tooth structure could be saved and occlusal contact of lingual surface remains undisrupted. Only nonfunctional discolored labial surface may removed. Third, complete removal of discolored part of a labial tooth and immediate resin restoration could be done effectively after pulp treatment. Moreover, it also could be used for pulp treatment having serious dental caries on labial surface with sound lingual tooth structure. This report presents cases with discolored upper anteior primary tooth, approaching labial side with successful restoration.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.121-127
• /
• 2020

Prosthodontic decision and management should be considered the patient's aesthetic need for anterior teeth in maxillary edentulism. This case report describes 10-year clinical outcome of a maxillary edentulous patient was rehabilitated by means of an implant-supported fixed dental prosthesis (ISFDP) for the anterior region and a distal-extension removable partial denture (RPD) for the posterior region. The ISFDP was designed to splint 4 endosseous implants as one unit and engaged by the RPD. The edentulous mandible was restored by means of an implant-supported overdenture. Over the course, no major adverse event occurred other than wear, discoloration, and breakage of resin veneers and artificial teeth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.772-779
• /
• 2010

This study measured the bonding strength of various porcelain prosthesis materials before and after thermocycling to select prosthesis materials that can maximize beauty and tolerance. To measure bonding strength, various porcelain materials were baked on with-Beryllium metals, non-Beryllium metals 8group and Zirconia 1 group among commercially available base alloys, and measured the bonding strength was measured before and after thermocycling. The findings of this study are as follows: 1) PTM(press-to-metal) porcelain non-Beryllium metal showed the, highteat bonding strength each 73.2MPa, 59.2MPa before and after thermocycling. 2) The porcelain materials baked on non-Beryllium metal showed higher bonding strength before and after thermocycling than those baked on with-Beryllium metal. 3) Zirconia products showed the lowest 38.7MPa bonding strength before and after thermocycling.