• Journal of Digestive Cancer Research
• /
• v.7 no.1
• /
• pp.26-30
• /
• 2019

Pancreatic cancer has a very poor prognosis. Complete surgical resection remains the only current curative treatment. Locally advanced pancreatic cancer (LAPC) is considered as unresectable because of involvement of celiac and/or mesenteric vessels. The treatment of LAPC is a challenge. Current guidelines suggest systemic therapy. However, the majority of patients will never experience conversion to surgical resection. Thus, in these patients, ablation is an alternative therapy for local control, which causes local destruction while ideally avoiding injury to surrounding healthy tissue. Irreversible electroporation (IRE) is an energy delivery system, effective in ablating tumors by inducing irreversible membrane destruction of cells. IRE demonstrated to be safe in previous studies. However, it is not free from complications, even serious. Here, we reported two cases of the IRE in LAPC patients.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.451-454
• /
• 2000

실의 음향성능을 규명하기 위하여 많은 음향인자가 개발되어지고 제시되어 왔다. 음향인자 중 확산은 실의 전반적인 음향성능에 매우 유용한 것으로 여겨져 왔다. 본 연구는 장방형의 형태를 가지고 체적과 마감재료가 같은 2종류의 축척모델을 제작하여 각각의 모델에서 RT, EDT, SPL, C, IACC 등을 측정하여 확산체의 유$\cdot$무에 따른 실의 실내음향 성능을 알아보고자 한다 실험결과 실내 표면의 확산성의 차이에 따라 표면의 확산성이 좋은 공간에서 초기음장에서 음에너지가 집중되고 분산되는 것을 입증하였다. 즉 확산성이 좋은 모델에서 잔향시간(RT)은 더 짧으나 초기감쇠시간(EDT)이 더 길게 나타남으로 인하여 음에너지의 분포가 실의 확산상태에 의하여 음의 발생이후 짧은 시간내에 집중하여 전달되고 있음을 증명하였다. 또한 실의 확산상태가 좋은 공간의 명료도가 확산이 되지 않은 실에 비하여 훨씬 더 좋은 결과를 보이고 있음을 나타냈다. 이상의 결과를 종합하여 볼 때 실내 표면의 확산성이 전반적인 실내 음장의 향상에 크게 기여하고 있음을 밝혀 냈다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.431-436
• /
• 2003

In this paper, simulation results of an electromagnetic field and mode distributions in a cylindrical reverberation chamber were presented. Reverberation chamber is an alternative test facility for a semi anechoic chamber, which is widely used for the analysis and measurement of electromagnetic interference and immunity tests. The method of computing the number of modes in a cylindrical reverberation chamber was presented and the number of modes in a cylindrical reverberation chamber with the same volume was compared with the different ratio of radius to height. The FDTD method was used to produce field characteristics inside of rectangular, right-angled isosceles triangular, and cylinder type reverberation chambers with the same test volume.

• Water for future
• /
• v.28 no.5
• /
• pp.141-150
• /
• 1995

An air chamber is designed to keep the pressure from exceeding a predetermined value, or to prevent low pressures and column separation. Therefore, it can be used to protect against rapid transients in a pipe system following abrupt pump stoppage. In this research, an air chamber was applied to a hypothetical pipe system to analyze attenuation effect of pressure head for different air volumes, locations, chamber areas, coefficients of orifice loss and polytropic exponents. With an increase of air volume, the maximum pressure head at pump site is decreased and the minimum pressure head is increased. For different locations and areas of the chamber, the attenuation effects do not show much difference. Also, as the orifice loss coefficient increases, the maximum pressure head is decreased. For different polytropic exponents, isothermal process shows lower maximum pressure head than that of the adiabatic process.

• Journal of the Korean Society for information Management
• /
• v.21 no.4 s.54
• /
• pp.89-107
• /
• 2004

This study analyzes the present conditions and operations of digital information rooms in the five selected university libraries located in Daegu and Kyoungpook area, with a special regard to the personnel, size of the room, facilities, collections, user instructions and public relations, and related tasks being done. It concludes with some suggestions and recommendations to improve the existing practices and the works in the room based on the result from this study.

• Plant Journal
• /
• v.9 no.2
• /
• pp.36-41
• /
• 2013

For areas installed with one pump, the trend for expected sizes of pump room areas is observed once pump power and floor dimensions are provided. However, these pump rooms with auxiliary charging pumps, turbine driven auxiliary feedwater pumps, and pump rooms with a separate valve room have unique ways to determine the pump room area. No definite trends are identified for areas installed with two pumps using pump power and floor dimensions. The relationship between pump power and floor dimensions is also unable to be found.

• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.436-444
• /
• 2009

As the interest in sensor networks has been increased recently, researches have been performed in many areas using sensor networks. In this paper, we propose and implement a lecture room control system based on a sensor network. It is possible to give an efficient lecture by collecting lecturers' lecture history information through the sensor network and controlling a PC, a beam projector, lights, etc. in a lecture room appropriately using the information. We construct a sensor network and perform experiments so that the proposed lecture room control system performs efficiently. Through the experiments, we obtained the optimal message generation period of the sensor node in a lecture room and the optimal number of sensor nodes deployed in a lecture room to communicate without any trouble between sensor nodes.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.125-143
• /
• 2013

The purpose of this study was to investigate the current Status and practical use of technology laboratory at the junior high school in Chungbuk Province in order to give some suggestions on hands-on activities for technology education. First, concerning present actual conditions of technology laboratory, There was a large disparity between the urban and rural schools in the possession of a technology laboratory, as the rate of the schools equipped with the rooms respectively stood at 69.84 percent and 33.38 percent in the urban and rural regions. By the type of foundation, every national school, 86.24 percent of the public schools and 37.50 percent of the private schools were equipped with the technology laboratory. By school size, 35.59 of the schools with fewer than 10 classes, 62.11 percent of the schools with 10 to fewer than 30 classes and 85.71 percent of the schools with 31 classes or more were in possession of the laboratory. Thus, the type of foundation and school size made differences to that. As a result of asking the schools without the laboratory about the reason, as many as 88.52 percent had been equipped with the laboratory in the past but converted them into spaces for another purpose. When the schools that had no such laboratory were asked a question whether they had any plans to install a technology laboratory, just five schools(8.19%) had that plan. Second, as for the practical use of the technology laboratory, for what the rooms were actually used was asked, and most of the schools made use of them as Comprehensive General laboratory. As to the size of the rooms, each of the rooms was as large as a classroom($66m^2$) in 62.12 percent of the schools, and their region, type of foundation and student gender made little significant differences to that. Regarding the time for utilizing the laboratory, the majority of the schools used the laboratory approximately once or twice a year, and their region, type of foundation, student gender and school size made few distinctive differences to that. In terms of budget for practice in the rooms, the largest number of the schools that accounted for 36.36 percent earmarked three thousand won to less than five thousand won per student.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.289-298
• /
• 2014

Purpose: This study was designed to investigate the present conditions of illumination techniques in dental laboratories in order to distinguish colors for esthetic dentistry. Materials and Methods: A total of forty-eight local dental laboratories were selected for sampling a) luminous intensity and b) color temperature. We measured the luminous intensity and the color temperature on a center point of porcelain table with lux meter and color meter respectively. The measurements were performed twice, once on a clear day and on a cloudy day between 12 pm and 2 pm (day light and artificial illumination) and between 7 pm and 10 pm (artificial illumination only). Results: The results obtained were as follows. 1. The average luminous intensity in dental laboratories lighting was 1871 lx, and 67% of dental laboratories had luminous intensity greater than 1600 lx, which was appropriate for operations related to colors, while 33% of dental laboratories had in sufficient lighting for appropriate luminous intensity. 2. The average color temperature in dental laboratories lighting was 6506 K, which was inappropriate for operations related to color. None of the dental laboratories had a color temperature range of 5000 - 5500 K, which is appropriate for operations related to colors. 3. Between daytime and nighttime, also between clear day and cloudy day, the average luminous intensity and color temperature in dental laboratories were not significantly different. Conclusion: Illumination in most dental laboratories selected in this study was inappropriate for operations related to color.

• The Journal of the Korea Contents Association
• /
• v.22 no.2
• /
• pp.475-486
• /
• 2022

The purpose of this study is to provide the service marketing data for skincare shops through analyzing the impact of the quality of service of skincare shops on perceived values and revisit intents. For this study, 397 middle-aged women who visited and experienced the services of the skincare shops in Seoul and the Gyeonggi region were surveyed. The data from the said survey were analyzed using SPSS 23.0 and AMOS 23.0. The findings of this study were as follows; first, the formality, reliability, certainty, and empathy among the service factors of skincare shops had a significant impact on economic values, while trust, certainty, and empathy had an impact on emotional values. Second, the formality, reliability, and empathy had a significant impact on revisit intent for skincare shops. Third, among the perceived values on skincare shops, both economic and emotional values had a significant impact on the intent to revisit. Fourth, the perceived values were confirmed to have partial mediating effects in the relationship between the quality of service of skincare shops and revisit intent for each service quality type.