• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.4
• /
• pp.257-262
• /
• 2008

This paper studies the operational characteristics of Multi-Phase Interleaved Boost converter operating in Boundary Conduction Mode. The generalized transfer functions of interest are derived from the full-order averaged model approach and then the steady-state and dynamic characteristics are analyzed. The theoretical results are verified through an experimental prototype of the 800W boost PFC converter for 60inch PDP power module.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.469-470
• /
• 2017

디지털 계측기는 전압 또는 전류 한주기에 대하여 여러 번 샘플링 하여 실효치를 구하고 위상은 전압영점에서 카운터를 시작하여 전류 영점에서 그 카운터의 값에 의해 전력을 구하는 것이 일반적이다. 그러나 계측대상 주파수가 샘플링 주파수와 유사한 경우 사실상 전력 계측이 불가능하게 되는 취약점을 안고 있다. 따라서 본 논문에서는 계측대상 주파수가 샘플링 주파수와 유사한 경우 샘플링 시프트 기능을 사용하여 계측하는 정규화 기법과 이를 이용하여 DFT를 사용하여 각 차수의 고조파 성분을 분석할 수 있는 알고리즘을 제안한다. 또한 제안된 방식을 Psim을 이용한 시뮬레이션을 통하여 그 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.665-666
• /
• 2007

본 논문은 배전계통에서 load switching 기법을 이용한 중성선 전류저감 방법에 대한 연구결과를 제시하였다. 본 방법의 동작은 중성선과 상전류의 변화에 의해 결정되며, 저감 방법에 대한 구성은 실효치 변환부, 3상전류 비교부, 최적조건 선택부 그리고 스위치 제어부로 총 4부분으로 구성되어있으며, 각 부분은 EMTP/MODELS를 이용하여 구현하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.90-96
• /
• 2006

A novel ${\Sigma}{\Delta}$ fractional-N PLL architecture for fast locking and fractional spur suppressing is proposed based on the capacitance scaling scheme. It changes the effective capacitance of loop filter (LF) by increasing and decreasing current to the capacitor via different paths with multiple charge pumps. The effective capacitance of loop filter (LF) can be scaled up/down depending on operating status while keeping LF capacitors small enough to be integrated into a single PLL chip. Fractional spurs suppressing have been achieved by reducing the magnitude of charge pump current when the PLL is in-lock without degrading fast locking characteristic. It has been simulated by HSPICE in a CMOS $0.35{\mu}m$ process, and shows flat locking time is less than $8{\mu}s$ with the small size of LF capacitors, 200pF and 17pF, and $2.8k{\Omega}$ resistor.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.699-705
• /
• 2001

Six types of planar thermal converters from TC 1 to TC 6 were designed and fabricated for the purpose of being used as practical standards to alternating current. The respective voltage responses in air and in a vacuum of TC 6, which has the smallest thermal loss, were about 4.03mV/mW and about 6.38 mV/mW. Thermal time constant of TC 6, which has also the smallest heater thermal inertia, was about 8 ms. The respective variations of AC-DC voltage and current transfer errors from sample to sample, which were measured by FRDC(fast reversed DC) method, were about $\pm$0.41 ~$\pm$0.85 ppm and about $\pm$0.15~$\pm$1.16 ppm in the frequent range of 40 Hz~10 KHz with appling 1 V and 5 mA rms sine waves to the converters. All converters investigated exhibited sufficiently low AC-DC transfer errors to be used as practical standards.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.74-81
• /
• 2008

The control system of high-precision AC power is important in traffic management lighting and beaconing of aerodromes, etc. To control AC power supply in these load characteristics, inverter systems of AC/DC/AC conversion are widely used in high-precision current control. Therefore, in this paper, a inverter system of constant current regulation using improved measuring technique of feedback current is proposed. Proposed measuring techniques improve response and precision in that it use moving average method of instantaneous RMS for measuring current sensing. Results of the computer simulation and experiment prove the effects of proposed system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.5
• /
• pp.1-5
• /
• 1975

접합형 트린지스터와 발광다이오드(LED) 및 광도전소자(CdS)로서 구성된 광결합 전류안정부저항회로를 진안하였다. 이는 일반적으로 광트랜지스터보다도 더 예민한 것을 이용하여, CdS와 LED를 밀착 시켜서 LED에 흐르는 전류와 CdS의 실효저항변화로써 결합된 광결합방식을 택하였다. 트랜지스터의 콜랙터-에미터간에 인위적인 누변저항을 삽입하는 방법을 도입함으로써 부저항치 및 최대입력단자전압치를 임의로 변화할 수 있게 하였으며, 제안한 회로를 분석하고 또 이를 실험적으로 확인하였다. 누변저항을 1KΩ에서 30KΩ까지 변화시켰을 때 최대입력단자전압은 1.65V에서 4.22V로 변하였고, 부저항치는 -1.0KΩ에서 -10.0KΩ까지 변하였다. 또 실험치에 대한 계산치에의 상대백분최대오차가 11%이었다. A current stable negative resistance circuit has been constucted with combination of coulplementary symmetrical transistors, a light emitting diode and a photoconductive cell. The negative resistance(Rn) and break-over voltage(VBo) can be set at a designed value according to adjustment of the artificial leakage resistance of p-n-p transistor. The RN and VBo calculated in this designed circuit are checked though the experiments, the errors are found less than 11%.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.106-112
• /
• 1989

In this paper, voltage and current measurement systems which utilize linear electrooptic and magnetooptic effects of BSO and ZnSe crystals are theoretically analyzed and experimented. In experiments, BSO voltage sensor has maximum 2% error within the applied voltage of 500V, and ZnSe current sensor has maximum 4% error within 1,000 A range. And temperature dependences of sensitivity for voltage and current in the temperature range from $-5^{circ}C\;to\;60^{circ}$C are measured +1.8% and 2.73%, respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.496-503
• /
• 2009

In this paper, a new three-phase interleaved isolated high efficiency boost dc-dc converter with active clamp is proposed. The converter is capable of increased power transfer due to its three-phase power configuration, and it reduces the rms current per phase, thus reducing conduction losses. Further, interleaved operation of three-phase boost converter reduces overall ripple current, which is imposed into fuel cells and realizes smaller sized filter components, increasing effective operating frequency and leading to higher power density. Each output current of three-phase boost converter is combined by the three-phase transformer and flows in the continuous conduction mode by the proposed three-phase PWM strategy. An efficiency of above 96% is mainly achieved by reducing conduction losses and switching losses are reduced by the action of active clamp branches, as well. The proposed converter and three-phase PWM strategy are analyzed, simulated and implemented in hardware. Experimental results are obtained on a 500 W prototype unit, with all of the design verified and analyzed.

• Fire Science and Engineering
• /
• v.34 no.4
• /
• pp.1-6
• /
• 2020

In this study, the authors measured voltage and current waveforms in real time during a serial arc discharge. The analysis results of the arc discharge radiation patterns exhibited intermittent discharge, arc growth, creation of a heat generating area, occurrence of plume, and formation of a red heat area, which proceeded in that order. When the serial arc discharge was introduced, the current and voltage waveforms exhibited periodicity as sine waves. It was also observed that a restriking transient voltage occurred when the waveform changed from positive (+) to negative (-) and vice versa. When the discharge proceeded, the amount of heat generated for 1 s and 600 s was approximately 0.317 mJ, and 190 mJ, respectively. The duration of the short circuit was approximately 1.66 ms, and in the case of the voltage waveform, it was evident that the electric potential increased to 49.9 V in the same cycle. Furthermore, when the discharge proceeded, the effective value (RMS value) of the current was approximately 1.72 A with a maximum current of approximately 2.53 A, whereas the effective value of the voltage was approximately 42.8 V with a maximum of approximately 208 V.