• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.3
• /
• pp.131-137
• /
• 1986

Korean lawn, Zoysia japonica STEUD, is the type of a perennial warm-season lawn grass that has a naturally green period during 5 months from May to September. This study was carried out to detect the effects of N-P-K fertilization, regrowth capacity after mowing and chlorophyll contents on prolongation of the green period in Zoysia japonica grasslands. The results obtained are summarized as follows: 1. The effects of nitrogen fertilizer application on Zoysia japonica grasslands were affected on regrowth capacity after mowing, green color of leaf canopies and chlorophyll contents, respectively. 2. A the experimental plots which applied 45g/$m^2$/10 weeks of $N_3$ fertilizer, there were high significant effects on prolongation of the green period and the plots of phosphorus and potassium had additive effects. 3. Prolongation of the green period to the last ten days of October was obviously possible by slow degrees in proportion to increment of N-P-K fertilization. 4. However, it is interpreted that more prolongation of the green period is impossible with N-P-K fertilization and irrigation treatments, unless the intermediate turfgrasses between $C_3$ and $C_4$ plants must be found and bred.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.35-61
• /
• 1978

To find out the power tiller's travel and tractive characteristics on the general slope land, the tractive p:nver transmitting system was divided into the internal an,~ external power transmission systems. The performance of power tiller's engine which is the initial unit of internal transmission system was tested. In addition, the mathematical model for the tractive force of driving wheel which is the initial unit of external transmission system, was derived by energy and force balance. An analytical solution of performed for tractive forces was determined by use of the model through the digital computer programme. To justify the reliability of the theoretical value, the draft force was measured by the strain gauge system on the general slope land and compared with theoretical values. The results of the analytical and experimental performance of power tiller on the field may be summarized as follows; (1) The mathematical equation of rolIing resistance was derived as $$Rh=\frac {W_z-AC \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\] sin\theta_1}} {tan\phi \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]+\frac{tan\theta_1}{1}$$ and angle of rolling resistance as $$\theta _1 - tan^1\[ \frac {2T(AcrS_0 - T)+\sqrt (T-AcrS_0)^2(2T)^2-4(T^2-W_2^2r^2)\times (T-AcrS_0)^2 W_z^2r^2S_0^2tan^2\phi} {2(T^2-W_z^2r^2)S_0tan\phi}\] $$and the equation of frft force was derived as$$P=(AC+Rtan\phi)\[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]cos\phi_1 \ulcorner \frac {W_z \ulcorner{AC\[ [1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]sin\phi_1 {tan\phi[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\]+ \frac {tan\phi_1} { 1} \ulcorner W_1sin\alpha $$The slip coefficient K in these equations was fitted to approximately 1. 5 on the level lands and 2 on the slope land. (2) The coefficient of rolling resistance Rn was increased with increasing slip percent 5 and did not influenced by the angle of slope land. The angle of rolling resistance Ol was increasing sinkage Z of driving wheel. The value of Ol was found to be within the limits of Ol =2\ulcorner "'16\ulcorner. (3) The vertical weight transfered to power tiller on general slope land can be estim ated by use of th~ derived equation: $$R_pz= \frac {\sum_{i=1}^{4}{W_i}} {l_T} { (l_T-l) cos\alpha cos\beta \ulcorner \bar(h) sin \alpha - W_1 cos\alpha cos\beta$$The vertical transfer weight $R_pz$ was decreased with increasing the angle of slope land. The ratio of weight difference of right and left driving wheel on slop eland,$\lambda= \frac { {W_L_Z} - {W_R_Z}} {W_Z} $, was increased from ,$\lambda$=0 to$\lambda$=0.4 with increasing the angle of side slope land ($\beta = 0^\circ~20^\circ) (4) In case of no draft resistance, the difference between the travelling velocities on the level and the slope land was very small to give 0.5m/sec, in which the travelling velocity on the general slope land was decreased in curvilinear trend as the draft load increased. The decreasing rate of travelling velocity by the increase of side slope angle was less than that by the increase of hill slope angle a, (5) Rate of side slip by the side slope angle was defined as $ S_r=\frac {S_s}{l_s} \times$ 100( %), and the rate of side slip of the low travelling velocity was larger than that of the high travelling velocity. (6) Draft forces of power tiller did not affect by the angular velocity of driving wheel, and maximum draft coefficient occurred at slip percent of S=60% and the maximum draft power efficiency occurred at slip percent of S=30%. The maximum draft coefficient occurred at slip percent of S=60% on the side slope land, and the draft coefficent was nearly constant regardless of the side slope angle on the hill slope land. The maximum draft coefficient occurred at slip perecent of S=65% and it was decreased with increasing hill slope angle $\alpha$. The maximum draft power efficiency occurred at S=30 % on the general slope land. Therefore, it would be reasonable to have the draft operation at slip percent of S=30% on the general slope land. (7) The portions of the power supplied by the engine of the power tiller which were used as the source of draft power were 46.7% on the concrete road, 26.7% on the level land, and 13~20%; on the general slope land ($\alpha = O~ 15^\circ ,\beta = 0 ~ 10^\circ$) , respectively. Therefore, it may be desirable to develope the new mechanism of the external pO'wer transmitting system for the general slope land to improved its performance.l slope land to improved its performance.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.34-34
• /
• 1978

To find out the power tiller's travel and tractive characteristics on the general slope land, the tractive p:nver transmitting system was divided into the internal an,~ external power transmission systems. The performance of power tiller's engine which is the initial unit of internal transmission system was tested. In addition, the mathematical model for the tractive force of driving wheel which is the initial unit of external transmission system, was derived by energy and force balance. An analytical solution of performed for tractive forces was determined by use of the model through the digital computer programme. To justify the reliability of the theoretical value, the draft force was measured by the strain gauge system on the general slope land and compared with theoretical values. The results of the analytical and experimental performance of power tiller on the field may be summarized as follows; (1) The mathematical equation of rolIing resistance was derived as $$Rh=\frac {W_z-AC \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\] sin\theta_1}} {tan\phi \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]+\frac{tan\theta_1}{1}$$ and angle of rolling resistance as $$\theta _1 - tan^1\[ \frac {2T(AcrS_0 - T)+\sqrt (T-AcrS_0)^2(2T)^2-4(T^2-W_2^2r^2)\times (T-AcrS_0)^2 W_z^2r^2S_0^2tan^2\phi} {2(T^2-W_z^2r^2)S_0tan\phi}\] $$and the equation of frft force was derived as$$P=(AC+Rtan\phi)\[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]cos\phi_1 ? \frac {W_z ?{AC\[ [1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]sin\phi_1 {tan\phi[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\]+ \frac {tan\phi_1} { 1} ? W_1sin\alpha $$The slip coefficient K in these equations was fitted to approximately 1. 5 on the level lands and 2 on the slope land. (2) The coefficient of rolling resistance Rn was increased with increasing slip percent 5 and did not influenced by the angle of slope land. The angle of rolling resistance Ol was increasing sinkage Z of driving wheel. The value of Ol was found to be within the limits of Ol =2? "'16?. (3) The vertical weight transfered to power tiller on general slope land can be estim ated by use of th~ derived equation: $$R_pz= \frac {\sum_{i=1}^{4}{W_i}} {l_T} { (l_T-l) cos\alpha cos\beta ? \bar(h) sin \alpha - W_1 cos\alpha cos\beta$$The vertical transfer weight $R_pz$ was decreased with increasing the angle of slope land. The ratio of weight difference of right and left driving wheel on slop eland,$\lambda= \frac { {W_L_Z} - {W_R_Z}} {W_Z} $, was increased from ,$\lambda$=0 to$\lambda$=0.4 with increasing the angle of side slope land ($\beta = 0^\circ~20^\circ) (4) In case of no draft resistance, the difference between the travelling velocities on the level and the slope land was very small to give 0.5m/sec, in which the travelling velocity on the general slope land was decreased in curvilinear trend as the draft load increased. The decreasing rate of travelling velocity by the increase of side slope angle was less than that by the increase of hill slope angle a, (5) Rate of side slip by the side slope angle was defined as $ S_r=\frac {S_s}{l_s} \times$ 100( %), and the rate of side slip of the low travelling velocity was larger than that of the high travelling velocity. (6) Draft forces of power tiller did not affect by the angular velocity of driving wheel, and maximum draft coefficient occurred at slip percent of S=60% and the maximum draft power efficiency occurred at slip percent of S=30%. The maximum draft coefficient occurred at slip percent of S=60% on the side slope land, and the draft coefficent was nearly constant regardless of the side slope angle on the hill slope land. The maximum draft coefficient occurred at slip perecent of S=65% and it was decreased with increasing hill slope angle $\alpha$. The maximum draft power efficiency occurred at S=30 % on the general slope land. Therefore, it would be reasonable to have the draft operation at slip percent of S=30% on the general slope land. (7) The portions of the power supplied by the engine of the power tiller which were used as the source of draft power were 46.7% on the concrete road, 26.7% on the level land, and 13~20%; on the general slope land ($\alpha = O~ 15^\circ ,\beta = 0 ~ 10^\circ$) , respectively. Therefore, it may be desirable to develope the new mechanism of the external pO'wer transmitting system for the general slope land to improved its performance.

• Korean Journal of Environmental Biology
• /
• v.26 no.2
• /
• pp.57-65
• /
• 2008

The effects of light quality and irradiance on the growth of centric diatom, Skeletonema costatum (Jinhae Bay strain) were investigated in the laboratory. At 20$^{\circ}C$ and 30 psu, the irradiance-growth curve showed the maximum growth rate of 1.17 day$^{-1}$ with half-saturation photon flux density (PFD) (K$_s$) of 92.4 $\mu$mol photons $m^{-2}s^{-1}$, $\mu$=1.17 (I-5.28)/(I+81.8), (r=0.98), and a compensation PFD (I$_0$) was 5.28 $\mu$mol photons $m^{-2}s^{-1}$. The 10 equated to a depth of 3$\sim$5 m from March to May, 11 m in June and 4 m from July to September in Jinhae Bay. These responses suggested that irradiance at the depth near the surface layer in Jinhae Bay would provide favorable conditions for S. costatum. To assess the effects of light (i.e. wavelengths) on the growth, nine wave-lengths were used ranging from near ultraviolet to near-infrared supplied by light emitting diode. At an irradiance level of 25 $\mu$mol photons $m^{-2}s^{-1}$, S. costatum grew under wavelengths of 405, 470, 505, 525, 568 and 644 nm, but did not grow at 590 and 623 nm; whereas S. costatum grew at all wavelengths at 100 $\mu$mol photons $m^{-2}s^{-1}$. This implies that S. costatum is likely to grow well in enclosed water bodies where suspended particles absorbs most of the blue wavelengths, and dominated by yellow-orange wavelengths.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.3 no.2
• /
• pp.67-76
• /
• 1983

This experiment was carried out to investigate the effects of the different nitrogen rates and cutting heights on the dead stubble after cutting, and the carbohydrate reserved in stubble of sorghum-sudangrass hybrid (Sorghum bicolor (L.) Moench) Pioneer 988. The experiment was undertaken in the Experimental Livestock Farm of Agriculture Coll., Seoul Nat'l Univ. In Suweon, 1981 and 1982. The results obtained are summarized as follows: 1. The dead stubble after cutting was found to be great with high rate of nitrogen fertilizer and low cutting height. It was also learned that the rainfall during forage cutting period made the dead stubble increased. 2. A significant higher (p<0.05) carbohydrate reserves in the stubble was observed in the high stubble height at the first cutting time and 6th through 7th day after the first cutting. The results indicate that the high stubble height reserves more carbohydrate for the early regrwoth stage after the first cutting when comparing with the low stubble. 3. The content of carbohydrate reserves was influenced by climete. Drought is caused to high content of carbohydrate, whereas, rain is caused to low content of that. The critical soluble carbohydrate content causing the death of stubble supposed to be 3 to 6% at least. 4. It is suggest that carbohydrate reserves in plant do not play a distinctive role for the regrowth in a summer annual forage like sorghum-sudangrass hybrid, but it might be rather influenced by the other factors, for example, environmental conditions at harvest and new bud.

• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.426-431
• /
• 2012

This study was conducted to establish an efficient screening method for resistant tomato to Fusarium wilt caused by Fusarium oxysporum f. sp. lycopersici (FOL). The resistance degrees of the six commercial cultivars of tomato to the pathogen were evaluated by dipping roots of the seedlings in spore suspension of five FOL isolates. On the basis of the results, two cultivars (Dotaerangmaster, resistant cultivar to FOL race 1; Supersunload, resistant cultivar to FOL race 2) and two isolates (KACC40043, FOL race 2; TF104, FOL race 3) were selected for system establishment. The disease development of the FOL isolates on the cultivars according to several conditions including root wounding, incubation temperature, inoculum concentration and dipping period of roots in spore suspension was investigated. The resistance of each cultivar to the disease was a race-specific response and hardly affected by the tested conditions except for incubation temperature of $20^{\circ}C$. The optimum temperature for disease development caused by FOL was 25 to $30^{\circ}C$. On the basis of the results, we suggest that an efficient screening method for resistant tomato cultivars to Fusarium wilt is to dip the non-cut roots of tomato seedlings at two-leaf stage in spore suspension of $1{\times}10^7\;conidia{\cdot}mL^{-1}$ for 0.5 hours and transplant the seedling to plastic pot with horticulture nursery media, and then to cultivate the plants in a growth room at $25^{\circ}C$ for 3 weeks with 12 hours light a day.

• Journal of Food Hygiene and Safety
• /
• v.27 no.3
• /
• pp.317-324
• /
• 2012

In order to determine an authenticity of food ingredient, we used DNA barcode method by universal primers. For identification of animal food ingredients, LCO1490/HCO2198 and VF2/FISH R2 designed for amplifying cytochrome c oxidase subunit1 (CO1) region and L14724/H15915 for cytochrome b (cyt b) region on mitochondrial DNA were used. Livestock (cow, pig, goat, sheep, a horse and deer) was amplified by LCO1490/HCO 2198, VF2/FISH R2 and L14724/H15915 primers. Poultry (chicken, duck, turkey and ostrich) was amplified by LCO1490/HCO 2198 and VF2/FISH R2 primers. But, Fishes (walleye pollack, herring, codfish, blue codfish, trout, tuna and rockfish) were only amplified by VF2/FISH R2 primers. For plant food ingredients, 3 types of primers (trnH/psbA, rpoB 1F/4R and rbcL 1F/724R) have been used an intergenic spacer, a RNA polymerase beta subunit and a ribulose bisphosphate carboxylase region on plastid, respectively. Garlic, onion, radish, green tea and spinach were amplified by trnH/psbA, rpoB 1F/4R and rbcL 1F/724R. The PCR product sizes were same by rpoB 1F/4R and rbcL 1F/724R but, the PCR product size using trnH/psbA primer was different with others for plants each. We established PCR condition and universal primer selection for 17 item's raw materials for foods and determine base sequences aim to PCR products in this study. This study can apply to determine an authenticity of foods through making an comparison between databases and base sequences in gene bank. Therefore, DNA barcode method using universal primers can be a useful for species identification techniques not only raw materials but also processed foods that are difficult to analyze by chemical analysis.

• Korean journal of food and cookery science
• /
• v.18 no.1
• /
• pp.43-50
• /
• 2002

This study was carried out to evaluate the quality attributes of frozen soy yogurts prepared by freezine soy yogurts, which are made of different types of Bifidobacteria (B. bifidum, B.breve, B. infantis) and oligosaccharides (fructooligosaccharides, galactooligosaccharides, isomaltooligosaccharides) containing $\alpha$-chymotrypsin treated soy protein isolate were evaluated in terms of overrun, melt-down quality, changes in the total number of Bifidobacteria after freezing, and sensory evaluation. The quality attributes of soy yogurts were also evaluated in terms of changes in the number of viable cells of Bifidobacteria in soy yogurts after incubation at 37$\^{C}$, pH 3.0 for 90 min, water holding capacity, and viscosity. The overrun of frozen soy yogurts fermented by B. bifidum showed the hiehest value but those fermented by B. infantis showed the lowest, while the melt-down quality of soy yogurts were vice versa. The total numbers of Bifidobacteria after freezing for 30 min in ice cream maker showed more than 10$\^$9/ CFU/ml. In sensory evaluation, all $\alpha$-chymotrypsin treated frozen soy yogsurt showed little beany flavor. In sour, sweet, and bitter tastes and mouth feel, the frozen soy yogurts fermented by B. bifidum evaluated better but those fermented by B. infantis evaluated worse. Also in the overall quality, the frozen soy yogurts fermented by B. bifidum were evaluated desirable but those fermented by B. infantis were evaluated undesirable. The water holding capacity and viscosity of soy yogurts fermented by B. bifidum showed the highest values but those fermented by B. infantis showed the lowest values. The total numbers of Bifidobacteria of all soy yogurts decreased from 10$\^$9/ CFU/ml to 10$\^$8/ CFU/ml after incubation at 37$\^{C}$, pH 3.0 for 90 min.

• Journal of Dairy Science and Biotechnology
• /
• v.34 no.4
• /
• pp.203-216
• /
• 2016

Probiotic microorganisms are thought to provide health benefits when consumed. In 2001, the World Health Organization defined probiotics as "live microorganisms which confer a health benefit on the host, when administered in adequate amounts." Three methods for screening potential probiotics have currently widely available. (1) In vitro assays of potential probiotics are preferred because of their simplicity and low cost. (2) The use of in vivo approaches for exploring various potential probiotics reflects the enormous diversity in biological models with various complex mechanisms. (3) Potential probiotics have been analyzed using several genetic and omics technologies to identify gene expression or protein production patterns under various conditions. However, there is no ideal procedure for selecting potential probiotics than testing cadidate strains on the target population. Hence, in this review, we provide an overview of the different methodologies used to identify new probiotic strains. Furthermore, we describe futre perspectives for the use of in vitro, in vivo and omics in probiotic research.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.280-286
• /
• 1999

This studies were conducted to evaluate efficiency of microbial inoculator for active composting of food wastes. The Microbial inoculators used in this studies were purchased from different comparise to evaluate their effectiveness for composting of food waste in Korea. The number of bacteria growing at $30^{\circ}C$ in commercial inoculator collected were below $91.0{\times}10^8\;CFU/g$ which were counted from well cured compost made by animal manure. The number of bacteria in commercial microbial inoculator, such as FL, VP, B9, CM and GE were higher than that of composted at $50^{\circ}C$ or $60^{\circ}C$ of incubation temperature. Fungi were counted in GR, VP and B9 as over $10^3CFU/g$ at $30^{\circ}C$ of incubation temperature, while fungi of all the commercial inoculator collected could not grown at $50^{\circ}C$ and $60^{\circ}C$. Actinomycetes in most of the these had higher number($10^5CFU/g$) than that of compost : however, it was not detected at $60^{\circ}C$ incubation temperature from all the samples collected. The amount of carbon dioxid production was order to VP>HU>B9>GE>CM>Control>Compost in the lab scale composting test with or without inoculation of commercial inoculators, however, but the difference in carbon dioxide production was similar among each treatments. The effect of inoculation on composting parmeter such as pH changes, temperature increasing and change of chemicals properties were a little among each treatments, with or without inoculation of commercial inoculator in active composting of food waste. Using commercial inoculator did not show any statistical difference in food waste composting process under various condition such as pH changes, temperature changes, etc.