• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.879-884
• /
• 2007

This study is to observe the change of temperature and relative humidity for various vegetables in vacuum precooling system. The materials for experiments were the lettuce, chinese cabbage, pak choi and cabbage. The experimental apparatus was constructed of vacuum chamber, vapor/water separator, water tank, pumps ejecting and cooling water circulation, refrigerator unit, cooling coil for water cooling, Hygrometer and Data logger measuring of the temperature change. The experiments were operated in 20torr and recorded every 3 minutes. It was found that the cooling temperature and speed of vegetables are depending on the percentage of its water content. The more water contains, the faster cooling speed and the lower cooling temperature.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.21-30
• /
• 1997

This paper describes the experimental method of a pod-type waterjet propulsion system in a towing tank and shows the experimental analysis and test results of a designed waterjet propulsion system to be used for a hybrid high speed craft. The cruising performance of this craft is estimated from the results of the hull resistance test and waterjet test under the assumption that the interaction between the hull and the inlet pod is very small. A pod-type waterjet system with an axial pump was designed and a stand-alone waterjet experimental system was developed. Useful data such as the pump performance, the jet efficiency, the losses of inlet duct and nozzle were obtained. Test results show a good agreement with the design requirement.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.64-64
• /
• 2017

노지 고추 수확작업은 7~9월에 걸쳐 5~6회 수행되며 가장 더운 한 여름의 태양볕에 노출되어 장시간 수확작업을 하며 노지채소 및 고추 수확작업시 자외선 과다 노출되어 악성흑생종, 광선각화증, 편평세포 암 및 각종 피부암발생의 원인되기 때문에 적절한 해가림 장치의 설계가 필요하다. 해를 가려주는 장치에 사용되는 재질로는 우산 및 양산에 널리 사용되어지는 섬유로 폴리에스테르를 선정하였으며 두께로 우산의 재질로 많이 사용되는 75 denier을 채택하였다. 코팅의 종류로는 Foam, Milky, Silver, 폴리우레탄을 채택하여 섬유의 코팅 종류에 따른 차단 효과를 실험하였다. 실험 방법으로서는 KS K 0850 텍스타일의 자외선 차단율 및 차단지수 시험방법에 의거 하여 실험하였다. 자외선 UV-A(365n/m), UV-B(315n/m) 측정장치는 자외선 센서, UV램프, 인디케이터로 구성된 측정기를 이용하였으며 각 재료별 5회 반복 실시하여 평균치를 산출 하였다. UV-A(365n/m) 측정값으로는 FOAM, MILKY코팅이 된 섬유재질이 KS의 우산 및 양산품질표시기준에 부합하여 해가림 장치에 사용이 적절하였으며 UV-B(315n/m) 파장 차단율 측정값으로는 KS의 우산 및 양산품질표시기준에 모두 부합되었다. 또한 해가림 장치는 태양고도에 따라 각도를 조절 가능한 형태로 설계하였으며 직사광선이 가장 강한 시간대인 10시부터 12시를 기준하여 틸팅의 최대 각도는 20도로 개발하였다. 또한 바람에 의한 날림현상을 방지하고 통풍효과를 높이기 위해서 해가림 장치의 섬유를 2중 구조로 설계하여 바람의 순환이 되게하였다.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.887-893
• /
• 2018

The purpose of this study is to compare the performance of X-ray generators installed in hospitals and universities and apply the quality control items of diagnostic X-ray generators to recognize the importance of periodic performance management. First, the reproducibility and linearity test results showed that the PAE of the reproducibility evaluation was high for the GX-650 devices that met the acceptance criteria in all the experimental conditions and lacked the periodic quality control. In the linearity evaluation, when the tube voltage was set to 100 kVp, It was measured to deviate from the error. In addition, it was found that the PAE in the low-accuracy evaluation results relative to an X-ray tube voltage and tube current of the device low occurrence frequency. The HVL experiment was included in all of the devices at the HVL by tube voltage. Therefore, it is necessary to recognize the importance of quality control of all devices rather than hospital and laboratory, and to manage the device performance by actively managing the device, and to establish a short - term quality control system like special medical devices.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.119-119
• /
• 2017

부레옥잠은 대량 재배 및 수확이 가능한 수질정화용 식물로 생활하수, 축산폐수, 공장폐수 등의 수질정화 기능이 뛰어나고, 수확물은 건조 및 발효과정을 거쳐 가축 사료, 유기질 비료, 버섯 배지로 사용이 가능하고, 별도의 공업적 처리를 거치면 고부가가치의 바이오 연료, 연소용 연료로 사용이 가능한 친환경 농업 생산물로 본 연구에서는 부레옥잠의 고형연료 제조를 위한 수면에서 수확장치 개발을 위한 견인 특성을 파악하고 장치개발 가능성을 파악하고자 하였다. 부력구조물 부력, 부레옥잠 견인력, 부력을 측정하기 위한 실험 장치를 제작하여 부레옥잠 중량, 견인방식, 견인속도에 따른 견인력을 측정하였고, 경남 거제시에 위치한 저수지에서 실제 견인실험을 수행하였다. 실험결과 견인중량 및 견인 속도가 증가할수록 견인력은 증가하였으며 인력으로 부레옥잠을 견인하는 경우 부레옥잠 중량당 견인력은 약 $0.9{\sim}1.39kg_f$로 나타났으며 이는 향 후 부레옥잠 견인장치를 설계할 경우 부레옥잠 견인중량에 따른 견인력 산정 시 참고 자료로 매우 유용하게 활용 가능할 것으로 판단되었다. 저수지에서 견인실험 결과 견인속도 증가에 따른 유속저항으로 경운기에 의한 견인작업은 불가능하였으며 인력에 위한 견인 실험결과 부레옥잠 단위중량당 견인력은 견인바 3 m의 경우 1.5 ~ 2.6 N/kg, 견인바 6 m의 경우 2.1 ~ 5.4 N/kg로 비교적 크기로 나타났으나, 견인용 바에 따른 요인을 고려한 경우는 0.36 ~ 0.91 N/(kg-m)로 비교적 일정한 값을 보였다. 견인용 바 6 m, 무부하에서 인력과 경운기로 견인하는 경우 견인력은 39.24 N, 153.03 N으로 인력으로 견인하는 경우가 견인력이 작게 측정되었음. 이는 속도증가에 따라 물의 저항력이 증가함으로 나타난 결과로 부레옥잠 견인 시 견인속도는 0.36 m/s가 가장 적합한 것으로 판단되었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.84-90
• /
• 1997

The turboshaft engine with the free power turbine has been used for various purposes, for instance electric power generator, emergency power source, helicopter powerplant and so on. Steady-state simulation program was developed and experimental tests was carried out for comparing with computer simulation results. The test unit was composed of 1-stage centrifugal compressor, the can type combustor chamber, 1-stage radial type compressor turbine, and radial type free power turbine, and its output power is obtained from 3-phase AC generator. Main component characteristics which was used for the steady state simulation program, were obtained from the manufacturer of the test unit, and modified from experimental results of test unit. In comparison between computer simulation and experimental test results even though the test unit has the operational limit, deviation of component performance characteristics in simulation were within 6％ range of experimental results.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.149-154
• /
• 2013

This paper considers the issue of LSS(Liquid Spill Stopper)'s performance verification testing against external resisting force. The importance of the test is to ascertain the possibility of liquid spill stop quickly and efficiently by LSS. The method adopted in this research is the experimental device for puncture's inflow pressure and test the adhesive (magnetic) force on shell plates during the sailing. The major results of the paper are the followings : (a) The performance of LSS against 40 and 100mm diameter puncture was confirmed under 1.0bar. (b) LSS near bow detached first at 20.2 knots. This indicates that LSS can recover the damaged movability needed to naval warships' operation as well as merchant ships.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.53-60
• /
• 2018

This paper describes the experiments of gaze tracking utilizing a low-cost electrooculogram measuring device. The goal of the experiments is to verify whether the low-cost device can be used for a complicated human-computer interaction tool, such as the eye-writing. Two experiments are conducted for this goal: a simple gaze tracking of four directional eye-movements, and eye-writing-which is to draw letters or shapes in a virtual space. Eye-written alphabets were obtained by two PSL-iEOGs and an Arduino Uno; they were classified by dynamic positional warping after preprocessed by a wavelet function. The results show that the expected recognition accuracy of the four-directional recognition is close to 90% when noises are controlled, and the similar median accuracy (90.00%) was achieved for the eye-writing when the number of writing patterns are limited to five. In future works, additional algorithms for stabilizing the signal need to be developed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.4
• /
• pp.71-78
• /
• 2008

In the case of the railway bridges, uplift forces were occurred at the edge of the segments when vehicular loads were applied. These forces caused the compressive and tensile forces in the fastening system. In the past, a structural analysis has been performed to investigate the safety of fastening system which was modeled with one directional spring elements based on the compressive test of fastening system. In this case, the stiffness of the spring element was obtained from experimental study which was conducted by compressive load. Therefore, to perform rational and exact structural analysis, the translational stiffness of the fastening system obtained from the experimental study applied the tensile load and the rotational stiffness should be considered because it was occurred the tensile force as well as the compressive force in fastening system. In this study, an elastic and inelastic experimental study was performed for six specimens. The translational stiffness along the vertical axis of rail and the rotational stiffness along the strong axis of rail were investigated, also structural behavior of the fastening system was analyzed.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.40-42
• /
• 2007

최근 컴퓨터 및 통신, 정보화산업 발전 및 수요에 따라 전원장치의 고집적화, 고효율화 및 고 기능화를 통한 소형화 기술 수요가 증가하고 있다. 스위칭모드 전원장치는 반도체 소자의 스위칭을 이용하여 전력변환을 하며 이를 보다 소형화하고 고밀도화시키며 시스템에 직접 장착할 수 있는 구조로 설계한 전원장치가 온보드 전원장치이다. 본 논문에서는 온보드 전원의 고밀도, 고집적화와 더불어 정전압 온보드 전원에 기능을 추가하여 정전류원으로 동작하는 온보드 전원을 제안한다. 제안한 회로는 능동 클램프 포워드 컨버터를 사용하였으며 2 차측 동기스위치를 이용하였다. 또한 정전압원과 정전류원으로 동작시 입력의 변화와 부하의 변화에 따른 빠른 응답속도를 가지는 제어기를 설계하였다. 제안회로는 이론적인 해석과 100W 실험장치를 통해 시험하며 그 타당성을 검증한다.