• Journal of Korean Association for Spatial Structures
• /
• v.11 no.4
• /
• pp.101-108
• /
• 2011

Glass Reinforced Plastic(GRP) shows very high strength, comparing to the lightness of material. And the effect of transparency or semitransparency can be obtained by this material. However, due to the hand laminating for the GRP, the material properties can not be credible. Thus, the material test of GRP must be performed before the structural design. In this paper, material tests were performed for the design of the artistic column with 30m high and 4mm thickness. And the results of tests could be compared with DIN to evaluate the material properties for the application on the column.

• 베이커리
• /
• no.10 s.363
• /
• pp.105-107
• /
• 1998

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.183-189
• /
• 2018

In this study, the bond strength between concrete and metal films was investigate according to changing water content ratio of substrate concrete by pull-out test in order to develop the new finishing design methods for building structures using the metal films. The following conclusions were obtained as a result of the studies. It was find that the colour of metal did not change before and after the metal spraying. Also, the water content ratio of substrate concrete must be controlled under 10% weight to confirm the standard bond strength of finishing material to concrete. 2.5 MPa. To enhance the bond strength between concrete and metal films, it is very effective to strengthen the concrete surface using the agent which strengthen the concrete surface and seal the pore of metal film by the sealing agents. Therefore, the control of concrete surface treatment and water content ratio are necessary to secure the bond strength of metal films.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.985-990
• /
• 2002

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface.

• 전기의세계
• /
• v.24 no.5
• /
• pp.53-56
• /
• 1975

선박에 본격적으로 자동화시스템이 채용되게 된 것은 1960년대의 일로서 주기관을 Bridge에서 직접 제어하는 방식을 채용하고 기관실에도 Control Room을 만들어 주기 및 보기등의 원격제어와 집중감시를 Control Console에서 가능하도록 하게 함으로써 발전하기 시작하였다. 세계무역량의 증가로 인한 선복량의 증가와 선원의 부족현상은 선박에도 고도의 자동화를 요구하게 되었고 선진조선국들은 선박자동화의 기술개발에 힘써 현재에는 각국의 선급협회들도 모두 기관실무인화에 관한 규격을 제정하여 이에 합격한 선박에 대해서는 부호들을 붙여주고 있다. 이와같이 기관실무인화는 자동화기술을 집대성한 것이라고 말할 수 있지만 최근에는 기술적으로 더욱 1보 전진하여 선박에 Computer를 탑재하고 기관의 자동화뿐만 아니라 항법과 선체 및 의장계통에까지 광범위하게 응용하기에 이르렀으며 실험단계를 거쳐 세계각국에서 실적선들이 출현하게 되었다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.466-472
• /
• 2008

Purple Gold is the alloy consisting of 78wt%Au-22wt%Al, and is expressed as a chemical formula, $AuAl_2$. Lately it is being used for the material of accessories or the decorative ornaments, being one of the colored golds having the peculiar purple color, like White Gold and Pink Gold. Purple Gold has the weak point in shaping through casting process due to the bad malleability and castability, being the intermetalic compound of Au and Al. Therefore, it is possible to produce the final product only by the cutting and the grinding process or to use it as a decorative coat with the thin film evaporation. This study implemented two kinds of thin film experiments. One is the case that heat treatment was made after Au and Al deposition evaporated separately with a weight ratio 78:22 on the 200nm$SiO_2$/Si substrate. The other is the case that the surface deposition was made through the vacuum evaporation, keeping the glass substrate temperature remain room temperature, using the bulk $AuAl_2$ as a source. The final film property was measured, focusing on the Purple Gold's color and thickness through the bare eye inspection, the microstructure analysis, the surface resistance analysis, the color difference analysis, and XRD analysis. Purple Gold was not formed, as the excessive surface agglomeration occurred, in case of being produced and treated thermally with 12.5nmAu/40nmAl/200nm$SiO_2$/Si structure. Our results suggest that of Purple Gold films, showing the same purple color as the bulk's, were successfully deposited with the direct thermal evaporation from the $AuAl_2$ bulk source.

• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.117-129
• /
• 2018

In this paper we will discuss two different layout concepts which can be applied to rail-vehicle assembly factory. The existing system is based on the traditional flow line, and the suggested system is based on the fixed position layout. The main factors which affect on the system performances are the variation of process time, shortage rate of part and the shortage period. Simulation experiments indicate that the fixed position layout is better with respect to the throughput, mean flow time per vehicle and the mean flow time per fleet. Furthermore, the fixed position layout is more robust than the flow line because performance measures are insensitive to the variations of factors.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.9-16
• /
• 2010

This study presents a system for validating the PLC code in the virtual environments of automobile trim line. There have been considerable efforts to develop standard PLC editors for saving human power and PLC test time. However, it was difficult to apply the PLC editor on a real shop floor environment. A virtual equipment was developed to communicate with the PLC module of a shop floor and to make up the connectivity environment by a special protocol. We can validate the code without launching real equipments because the PLC module and the virtual equipment is able to be controlled in real time by the OPC protocol. An experimental model is applied to the final assembly line of an automotive industry and validated by using DELMIA Automation. In conclusion, the system is valuable in the process of PLC codes validation and virtual equipments operation. This system would reduce the development time of the PLC codes and improve the productivity and the integrity of the PLC codes.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.4
• /
• pp.41-47
• /
• 2013

For the artistic column used by Glass Fiber Reinforced Plastic(GFRP), the connection of steel with GFRP were needed. Due to the fabricating characteristics of hand laminating, GFRP surfaces had to be connected. Because there were no existed data of these connection, experimental study has to be followed so that the structural strength and buckling mode could be investigated. In this paper, therefore, the axial tests of steel with GFRP were performed. The connection of GFRP's surfaces could be also tested as well. As a result, it could be figured out that the strength of these connections were determined by the adhesive strength.

• Korean Institute of Interior Design Journal
• /
• v.27 no.2
• /
• pp.12-23
• /
• 2018

The purpose of this study is to examine the innovative and experimental housing design alternatives in the transition period to the modern era and to discuss about the motivation of modern architectural form. Thus, first, this study examined the planning concepts and the meaning of new design of the four Werkbund dwelling Exhibitions in eastern Europe reflecting the demands of modern times. Second, I analyzed how the formative experiment appeared as a stereoscopic mass design and as a architectural composition in exterior. Experimental trials at housing exhibitions were to respond to the demands for the new forms, which required a new approach to modern style and aesthetics. The major features of formative experiments can be summarized as follows. First, new housing design have escaped from the historically descended style. Secondly, through the operation of volume and surface modern dwelling created a formative conformation. Finally, the shape and the surface replaced the decoration. In conclusion, the works of modern architects can be said to have achieved the harmony between 'purpose of expression' and 'technical purpose' in realizing the 'Zeitgeist' that corresponds to the paradigm of modern housing.