• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.903-909
• /
• 2018

In this paper, performance analysis of machine vision techniques is presented to improve the convenience and speed of automatic inspection in the industrial field when machine vision is applied to the image not taken in the stationary state, but in the moving state on a conveyer. When the length of cylindrical rods used for automobiles was measured using the edge detection method, the conveying speed increased, and the uncertainty of the boundary between the background and the part image increased, which resulted in a shorter image of the object taken. This paper proposes a linear compensation method to predict the biased errors of the length measurements after examining the pattern of biased and random errors, respectively, with 6 different types of specimens and 7 velocity stages. The length measurement corrected by the linear compensation method had the same accuracy as the stationary state within the speed range of 30 cm/s and could enhance the application capability in automatic inspections.

• Journal of The Korean Association For Science Education
• /
• v.31 no.1
• /
• pp.115-127
• /
• 2011

Analysis frame for undergraduate physics laboratory reports in collecting, processing, and analyzing data was developed. Using the frame and questionaries, we analyzed what difficulties students have in the concepts of error and uncertainty in writing laboratory reports. Students considered repetitive measurement for collecting data, but they didn't express it distinctly in their reports. They also had difficulties in measuring data around the extreme value or the large slope. Especially, most students have had difficulties with error and uncertainty. They can't apply the basic formulation to propagation of error and uncertainty. They also had the difficulties in analyzing data with concepts of error and uncertainty. While most students responded that error and uncertainty is important, there were few students who analyzed the influence of the cause of error on the results quantitatively. The result of the study showed that students have difficulties in writing the laboratory reports because they didn't have the correct concept of the error and uncertainty. So, it is needed to not only teach the physics concept about experiment but to teach basic concept of data collecting, processing, and analyzing specially about error and uncertainty for students as well.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.199-205
• /
• 2004

There are many antenna array errors. They will distort the array beam pattern and result in an increased sidelobe level. A calibration technique is proposed for correcting the antenna array errors such as mutual coupling and unequal feeder characteristics. These are modeled as a matrix representing the interaction between the radiating elements. The matrix is estimated from the measured array response vectors. The antenna array errors are corrected by modifying the beamforming weight vector. It is verified by the electromagnetic simulation and experiment that the proposed technique reduces the sidelobe level and increases the antenna gain.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.227-229
• /
• 2005

교류전동기의 벡터제어 구동 시스템에서 상전류 측정 오차는 토크 및 속도 제어 성능에 직접적인 영향을 주는 요소로서, 맥동 없는 토크 및 속도 제어를 위해서는 상전류의 정확한 측정이 필요하다. 상전류 측정 오차는 오프셋(Offset) 변동에 의한 오차와 스케일(Scale) 차이에 의한 오차로 분류할 수 있으며, 각각의 오차 성분은 고정자 전기 주파수의 1배 및 2배에 해당하는 토크 맥동을 야기 한다. 본 논문에서는 교류전동기 벡터제어 구동 시스템에서 상전류 측정 오차에 의한 토크 맥동을 저감시킬 수 있는 새로운 알고리즘을 제시하며, 시뮬레이션 및 실험을 통해 제안된 방식의 타당성을 입증한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.211-213
• /
• 2001

히스토그램은 질의 최적화글 위해 사용되는 튿-계 정또 중 하나이다. 최근에는 방대한 데이타에 대한 범위 질의의 선택도 추정 방법의 하나로 사용되기도 한다. 히스토그램을 통한 범위 질의의 선택도 추정 결과는 항상 오차를 포함한다. 따라서 결과의 신뢰성을 보장하기 위해 선택도에 대한 오차를 추정하는 방법이 요구된다. 추정된 선택도의 오차 추정에 대한 기존 방법은 1차원 히스토그램만을 고려하여 하나의 애트리뷰트의 값에 따라 빈도의 분포를 반영하므로 애트리뷰트가 많은 다차원 히스토그램에 바로 적용시키는데 문제가 있다. 이 논문에서는 기존의 추정된 선택도에 대한 오차 추정 기법들을 다차원에 적용할 수 있게 확장한 M-Max, M-Sum 기법을 제안하고, 두 기법을 합친 하이브리드 기법을 제안한다. 실험을 통해 M-Sum 기법과 하이브리드 기법이 M-Max 기법보다 정확한 오차 추정 기법임을 보이고, 또한 작은 기억 공간에서도 두 기법이 오차를 보다 정확하게 추정함을 보인다.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.119-138
• /
• 1998

Recently measurements of atmospheric trace gases from satellite are vigorous. So the development of its data processing algorithm is important. In this study, retrievalof vertical ozone profile from the atmospheric transmittance measured by satellite solar occultation method and its sensitivity to temperature and pressure are investigated. The measured transmittance from satellite is assumed to be given by the limb path transmittance simulated using annual averaged Umkehr data for Seoul. The limb path transmittance between wavelengths $9.89{\mu}m$ and $10.2{\mu}m$ is simulated with respect to tangent heights using the ozone data of HALOE SIDS(Hallogen Occultation Experiment Simulated Instrument Data Set) as an initial profile. Other input data such as pressure and temperature are also from HALOE SIDS. Vertical ozone profile is correctly retrieved from the measured transmittance by onion-peeling method from 50km to 11km tangent heights with the vertical resolution of 3km. The bias error of $\pm0.001$ in measured transmittance, the forced error of $\pm3K$ in each layer temperature, and the forced $\pm3%$ error in each layer pressure are assumed for sensitivity tests. These errors are based on the ADEOS/ILAS error limitation. The error in ozone amount ranges from -6.5% to +6.9% due to transmittance error, from -9.5% to +10.5% due to temperature error, and from -5.1% to +5.4% due to pressure error, respectively. The present study suggests that accurate vertical ozone profile can be retrieved from satellite solar occultation method. Accuracy of vertical temperature profile is especially important in the retrieval of vertical ozone profile.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.33-40
• /
• 2010

In this paper, we consider three macroscopic traffic flow monitoring indices, Travel Time Index(TTI), Acceleration Noise(AN) and Two Fluid(TF) and investigate how to determine a proper rate of probe cars for producing reliable values of these indices. For the analysis, we use classical sampling theories and provide numbers of probe rates using simulation data.

• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.325-332
• /
• 2017

This study was performed to investigate the effects of receiver's moving speed and pass types on anticipation timing response. Ten subjects were required to make a total of 24 passes in coincidence with an experimentally manipulated moving light signal in randomly three different conditions by performing chest and bound pass. Results of analyses revealed AE, CE, and VE increased as moving velocity became constant-acceleration condition. In addition, chest pass was more accuracy and consistency than bound pass on AE and CE. These findings indicated that moving velocity and pass type served as the major determination of coincident timing response on passing in basketball.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.6
• /
• pp.354-360
• /
• 2002

Delay estimation must be simple and efficient, since millions or more delay calculations may be required during a timing-driven placement stage. We have developed a new Modified Elmore delay estimation method, which is significantly more accurate than the original Elmore delay by considering resistance shielding effects, but has the same order of complexity with that of Elmore delay. Experimental results show that the suggested technique can significantly reduce the error in estimated delay, from 31.6 ~ 145.2% to 2.5 ~ 22.7%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.18-30
• /
• 2004

In this paper, the calibration problem of an asynchronous CDMA-based antenna array is studied. A new iterative calibration algorithm for antenna array in the presence of frequency offset error is presented. The algorithm is applicable to a non-linear array and does not require a prior knowledge of the (direction of arrivals) DOAs of the signals of any user, and it only requires the code sequence of a reference user. The algorithm is based on the two step procedures, one for estimating both channel and frequency offset and the other for estimating the unknown array gain and phase. Consequently, estimates of the DOAs, the multi-path impulse response of the reference signal sources, and the carrier frequency offset as well as the calibration of antenna array are provided. The performance of the proposed algorithm is investigated by means of computer simulations and is verified by using field data measured through a custom-built W-CDMA test-bed.