• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.38-43
• /
• 2001

In this study, the technique of the performance prediction on the finocyl-type dual-thrust rocket motor is developed, and the predicted data are compared with those of the static firing tests. The prediction is carried out with the separate calculations of the grain burning area and the performance of the rocket motor. When predicting the performance of the dual-thrust rocket motor, the different correction factors should be used at the boosting and sustaining phases. Otherwise, an error of prediction will follow. Reprediction using the separate correction factors shows good agreement with the test data within 0.5% error.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.491-494
• /
• 2005

This paper describes the fundamental research of hybrid-propellant rocket system focusing the flight. The performance of the hybrid-propellant rocket system (using the background of lab-scale tests) for a small-scale launch vehicle could have been validated by static thrust tests and flight tests. Based on this system, it was found that hybrid rocket propulsion system was available in an application to a launch vehicle system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.377-386
• /
• 2015

DubaiSat-2 is the first satellite developed in Korea equipped with a hall-effect thruster. In this paper, the performance of the DubaiSat-2 hall-effect thruster is verified by analyzing the orbit information of DubaiSat-2. The preparation and performance of orbit operations during 8 months after launch (2013.11.21., UTC) is emphasized and the effects of solar activity on orbit evolution is analyzed. In particular, the hall-effect thruster's thrust is estimated by analyzing difference between observed orbit evolution and predicted orbit. As a result, the estimated thrust is similar to the ground experiment result of 11 mN. The summarized result in this paper would be important reference to improve the stability and effectiveness of satellite operation during the early operation and normal mission lifetime in case of low Earth orbit satellites.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.141-147
• /
• 2002

Estimation of thrusters efficiency is a very important process at the end of lifetime of a satellite. This paper introduces a technique to estimate the efficiency change of thrusters considering bubble effect for Koreasat I. During APEMAC(Automatic Pitch Error/ Momentum Adjust Control), the change in thruster efficiency is estimated to compare the attitude telemetry data of the Koreasat I with the results of the control logic using Simulink. The outcome of this study is expected to contribute to improving the operational load at the end of generic communication satellite mission.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2005

An axisymmetric compressible flow solver accounting for chemical equilibrium has been developed as an analysis tool exclusively suitable for performance prediction and optimum contour design of LRE thrust chamber. By virtue of several features focusing on user-friendliness and effectiveness including automatical grid generation and iterative calculations with changes in design parameters prescribed through only one keyword-type input file, a design engineer can evaluate very fast and easily the influences of various design inputs such as geometrical parameters and operating conditions on propulsive performance. Validations have been carried out for various aspects by detailed comparisons with the result of CEA code, experimental data of JPL nozzle, actual data for two historical engines, and ReTF data for KSR-III.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.24-24
• /
• 1998

미사일의 수직 발사 시스템은 수송 및 발사에 필요한 공간을 작게 차지하고 간편하여 각국이 선호하고 있다. 그러나 미사일이 수직발사 초기에는 매우 낮은 속도로 상승하므로 미사일의 방향조정용 Fin의 공력이 발생하지 않기 때문에 초기에 Jet Vane 등의 기계장치를 이용 추력의 방향을 제어하여 마사일의 방향을 목표로 향하도록 하는 Controller가 필요하게 된다. 본 Controller는 DC Motor와 감속기를 이용하여 Vane을 제어 할 수 있도록 설계되어 있으며 1차적으로는 지상 시험용 Controller를 개발 완료된 상태에 있다. 추후 실제 사용하기 위한 Controller를 만들기 위해서는 Main 유도장치와의 상호 Interface 관계를 고려하여 설계되어야 하며 소량 경량화 및 충분한 신뢰성을 갖춘 Controller를 개발하여야 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.74-80
• /
• 2014

This paper describes the development of the dual-thrust flight motor for enhancing the hit probability of unguided rockets. We designed dual-thrust flight motor by shape modification of the double base propellant with high burning rate, and confirmed the dual-thrust performance by static firing tests. The test results showed the thrust ratio of about 1:7.6 between sustaining phase and boosting phase, and had a quietly normal dual-thrust characteristics. And the results showed that there was not the fire extinction phenomenon of propellant due to the pressure drop.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.4
• /
• pp.57-66
• /
• 2001

The precise prediction of the performance is essential to develope the system at the development of propulsion system since no experimental data are available. The accuracy of 1on the total system's performance as well as itself, which depends on how the correction fac $I_{sp}$, and so on, are determined in accurate. However some of the design factors are dete engineer's experience or the similar test data if they are available, so far. This study was the method of the determination of correction factors of both $I_{sp}$ and thrust in direct. The bas is to define the detail performance loss mechanism of solid rocket motors, might be occurre and to calculate in quantitative those correction factors from the performance loss mechanism the test results, the model of this study can predict those factors less than 1% error, in additi physical variances of each loss mechanism.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.141-146
• /
• 2002

During dynamic flight by propulsion of rocket engine, in the atmosphere, the attitude control of flight vehicle can be accomplished by the aerodynamic fin actuator. But, in the outer space, the method of TVC(Thrust Vector Control) is only depend on for it. There are many systems which were developed for TVC. In our research, among them we adopted gimbal engine actuation system which could control the vector of thrust by swivelling rocket engine connected by gimbal. There are electro-hydraulic, electro-mechanical and pneumatic system which can be used as gimbal engine actuation system, but the electro-hydraulic system that has high ratio of output power to mass is preferred for the high power system. In this note, we made a mathematical model of the electro-hydraulic gimbal engine actuation system for the TVC of KSR-III in detail and on the base of this model we performed a simulation study. And then, we verified the model by making a comparison between the simulation and the experiments on the real system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.109-112
• /
• 2004

Of late, the thrust vectoring control, using fluidic co-flow and counter-flow concepts, has been received much attention since it not only improves the maneuverability of propulsive engine but also reduces an additional material load due to the trailing control wings, which in turn reduce the aerodynamic drag. However, the control effects are not understood well since the flow field involves very complicated non: physics such as shock wave/boundary layer interaction, separation and significant unsteadiness. Existing data are not enough to achieve the effectiveness and usefulness of the thrust vectoring control, and systematic work is required for the purpose of practical applications In the present study, computational study has been performed to investigate the effects of the thrust vector control using the fluidic co-and counter-flow concepts. The results obtained show that, for a given pressure ratio, the thrust deflection angle has a maximum value at a certain suction flow rate, which is at less than $5\%$ of the mass flow rate of the primary jet. With a longer collar, the same vector angle is achievable with smaller mass flow rate.