• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.18 no.1
• /
• pp.39-46
• /
• 1982

The author has developed the computer program in order to calculate the optimum alignment condition of marine propulsion shafting by linear programming method. The input of program was calculated by the matrix method of three-moment. He compared the calculated values with the experimental values measured by the strain gage on the model shaft, and the values of calculation on actual propulsion shafting with those of Det norske Veritas. The computer program of optimum alignment has been applied to the actual shaft. The results obtained are as follows: 1. To obtain the reaction of supporting points in the straight line necessary to the optimum alignment and the reaction influence number, after the computer program had been developed and then adapted, the result of experimental values and calculated values agreed with each other and the values of the actual shaft were also approximately similar to the values of other program. 2. In this paper, the measuring method on model shaft by strain gage can be effectively used at the time of adjusting alignment condition of actual shaft. 3. The supporting bearing should be considerably readjusted to the vertical direction in order to satisfy some limited condition.

• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.15-20
• /
• 2012

In order to investigate the maneuverability of tug-barge, sea trial tests such as speed, acceleration/deceleration, $10^{\circ}$ turning, $20^{\circ}$ turning, $10^{\circ}/10^{\circ}$ zigzag and $20^{\circ}/20^{\circ}$ zigzag were conducted with both tug and tug-barge. From the result of turning test, longer tactical diameter and lower rate of turn of tug-barge than those of tug are obtained. From the result of the zigzag test, bigger overshoot angle of tug-barge than that of tug is obtained. When they turned or changed a course, it showed that the barge turned inner side of the trajectory of tug. For the safe navigation, the helmsman of tug-barge should be aware of these maneuvering characteristics.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.3
• /
• pp.205-211
• /
• 2014

Interests on energy saving devices (ESDs) have been increased with the concern of the energy efficiency design index (EEDI) developed by the international maritime organization (IMO). To study the influence of ESDs, KVLCC2 with energy saving pre-swirl stator (PSS) was selected. To validate the computations, computed nominal wake of the model scale ship was compared with the experimental data, and the numerical uncertainty assessment was done for the full scale ship computations. The PSS changed rotational flow, which was assistant to the propeller thrust for the model and full scale ships. Performances of the full scale ships were predicted by ITTC methods, and new prediction method was proposed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.405-411
• /
• 2014

It needed the calculation of the required tugboat's power to move the damaged vessel to the safe area for reducing the additional damages. In this paper, it was verified the theoretical calculation method on the required power of tugboat through the 93m real ship tests. From the experiments, it was considered that the theoretical calculation method was sufficient to estimate the required power of tugboat. The resistance of the locked propeller was relatively big portions compared with other static resistances such as air resistance, frictional resistance and residual resistance. And dynamic resistance induced by swing movement and yawing was continuously occurred and it also was great effects on the total resistance. In the future, the safety factor will be considered and the exact prediction of ship's resistance will enhance the efficiency of tugboat because of the minimization of safety factor.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.1
• /
• pp.15-22
• /
• 2011

In this paper, cavitation patterns of model tests were compared with those of full-scale measurement for a propeller of crude oil carrier which was suffered from erosions on suction side of blade tip region. Cavitation tests were performed at design and ballast draft using model and full scale nominal wakes. A model ship and wire mesh method was used for the simulation of wake patterns of model nominal wakes. For the prediction of full-scale wake patterns, a RANS solver(Fluent 6.3) was used and wire mesh method was used for the simulation of the full scale wakes. Comparison results show that cavitation patterns using predicted full-scale wake patterns are closer to cavitation patterns of full-scale measurement at ballast draft condition. Also, cloud cavitations were observed on the position of eroded area at both full-scale measurement and cavitation tests using simulated full-scale wake patterns.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.613-618
• /
• 2012

For the tug-barge simulation, captive model test(Horizontal Planar Motion Mechanism) of the barge model is carried out. From the result of HPMM test, a resistance coefficient, maneuvering coefficients of the barge are obtained. A mathmatical model of the barge is validated by turning simulations with different angle of towing line applied a simple towing line model and the tactical diameter compared to sea trial data. As a result, the tactical diameter of the barge is smaller as the angle of towing line is bigger. The tactical diameter from simulations is smaller than that from sea trial data, may be caused by increased displacement of the barge.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.133-141
• /
• 1994

In this paper, experiences obtained during the development of MASS(Noise Analysis of Ship-board using SEA) are described. The results are summarized as follows. (1) The modelling techniques for ship structure and cabins are suggested. (2) Structureborne and airborne noise for a real ship were measured at sea trial and predicted by NASS. The differences between the two values are acceptably small for the cabins located on higher decks, although problems related with modelling of lower decks and evaluation of radiation efficiency were found.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.51-57
• /
• 1994

In this study, the method for calculation of the frequency transfer function of motions based on the multi-directional waves in the analysis of a full-scale seakeeping trials is presented. For calculation of the frequency transfer function in the directional waves, Takezawa's inverse estimation method was introduced and the frequency ranges were divided into three parts in order to consider following seas. To confirm the validity of this method, the numerical simulation was executed. Those results show that analysis method of the multi-directional waves is more reliable than that of one directional waves, and confirm the possibility of applying this method to the full-scathe seakeeping trials.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.32-41
• /
• 1994

This paper presents the model-ship correlations based on model test results of 36 ships. All of model tests were conducted at KRISO towing tank The correlation factors $C_P,\;C_N,\;and\;C_{NP}$ are estimated by the ITTC Standard Method and compared with the results of another towing tank. In the 36 ships, the block coefficients of thirty ships are greater than 0.72. Nevertheless the comparison of factors is in good agreement. The corrections to the scale effect on wake fraction ${\Delta}{\omega}_c$ and roughness allowance $C_{Ac}$ are subject matter in practice. The correction formulae are proposed by functions of ship length and form factor. And the correction formula of resistance coefficient ${\Delta}C_{Fc}$ based on Townsis's hull roughness formula is presented.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.258-260
• /
• 2023

목포해양대학교와 삼성중공업은 2021년 공동 연구를 통하여 '실습선 기반 원격/자율 운항 선박 시스템 개발 및 검증'을 수행하였고 이를 통하여 목포해양대학교 실습선인 세계로호를 활용하여 삼성중공업의 자율운항 선박 시스템(Autonomous Navigation System)인 SAS의 Test Bed 시연 실험 시스템을 구축하여 2022년 자율운항 선박(MASS) 기술 요소에 대한 시뮬레이션 기반 SAS(Samsung Autonomous Ship) System 검증 및 '운항 노선에 대한 설정을 통한 선박 자율운항 검증'을 위한 실선·실해역 실험을 통해 이를 시연 및 검증을 시행하였다. 특히 의미 있는 것은 자율운항선박 실선 테스트 과정 중 발생할 수 있는 모든 위험요소 분석을 위해 한국선급과 HAZID Workship을 실시하였고, 이를 통해 국내최초 자율운항실험용 기국 승인 및 선급임시검사 완료 후 실험이 진행되었다는 것이다. 이 연구에서는 실습선 기반 자율운항 선박 실해역 실험 연구를 소개하고 그 결과를 운항자 입장에서 분석하여 향후 보완하여야 할 사항을 제시하였다.