• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.1
• /
• pp.33-46
• /
• 1988

This paper describes a simplified method for estimation of the ultimate compressive strength of actual ship panels with initial deflection of complex shape. The proposed method consists of the elastic analysis using the large deflection theory and the rigid-plastic analysis based on the collapse mechanism which also includes the large deformation effect. In order to reduce the computing time for the elastic large deflection theory and the rigid-plastic analysis based on the collapse mechanism which also includes the large deformation effect. In order to reduce the computing time for the elastic large deflection analysis, only one term of Fourier series for the plate deflection is considered. The results of the proposed method are in good agreement with those calculated by the elasto-plastic large deflection analysis using F.E.M. and the computing time of the proposed method is extremely short compared with that of F.E.M.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.125-130
• /
• 1992

A digital 6-dof motion measuring system is developed using 7 accelerometers following Miles'[1] method. A snoic wave height gauge is also developed to measure the relative wave height at the foremost end of the ship. By combining the time series of both 6-dof motions and relative wave height, we can estimate the time series of real sea wave. Results of model tests shows the validity of the developed system.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.19 no.4
• /
• pp.61-70
• /
• 1982

The hydrodynamic effects on resistance and propulsive performance were studied by using the data from model test and full scale speed trials. A series of model tests on 3 geosims for a 60,000 DWT Bulk Carrier was conducted at KIMM's Ship Experimental Towing Tank and the results analyzed by 1978 ITTC Performance Prediction Method show the correlation between 3 geosim models. Also powering data of full scale speed trials were analyzed by the newly developed computer program and the correlation analysis between ship and model was studied.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.1
• /
• pp.54-60
• /
• 1998

Generally, spiral test has been used for evaluating course-keeping quality of a ship. But, there are many difficult problems in performing spiral test and reversed spiral test. Therefore, we propose zig-zag test instead of spiral test for evaluating curse-keeping quality of a ship. In this paper, K-T maneuvering response model is applied to the spiral curves which are systematically produced to calculate Zig-zag maneuver. Then, 1st overshoot angle and 2nd overshoot angle are plotted. And the relations between overshoot angles and band widths of spiral curve are discussed.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.23-25
• /
• 2004

HFPD(High Frequency Partial Discharge) measurement has been widely performed to diagnose cable system in the world. Shin-Yeongdeungpo 345kV XLPE line was successfully diagnosed by PD measurement methode last year. Moreover, aged power cable lines which were installed 15 years ago have been tested from this year. In this paper, the result of PD diagnosis for aged 154kV cable line is reported. The PD pattern from TMJ which was monitored by PD measurement system for several days showed typical void pattern. The joint was replaced and voids between semi-conductor layer and insulating layer in the joint was founded.

• Proceedings of the KIEE Conference
• /
• 2004.05b
• /
• pp.97-100
• /
• 2004

HFPD(High Frequency Partial Discharge) measurement has been widely performed to diagnosis of cable system in the world although Korea just begin. The efficiency of measurement has been reported and proved by many researchers who are engaged in the diagnosis of high power apparatus. LG Cable has investigated the technology of diagnosis for cable system by means of PD measurement for 10 years. In this paper, PD measurement with portable device was performed to evaluate the quality of the 154kV transmission line and the 22.9kV XLPE cable line. Test results are shown that the HFPD detection technology is very attractive for the diagnosis of power cable system by high detection sensitivity at on-site.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.1
• /
• pp.1-8
• /
• 1995

The motion of a small boat in seas is affected in relatively higher degrees than the case of a larger ship by the specific characteristics of sea waves, i.e., the wave length and height. Ship's motion caused by sea waves is a matter of special importance to small fishing boats, because they carry out fishing job in rough seas frequently. This is an experimental study on the rolling and pitching motions of full scale ship. In the experiment, the ship's motions were measured for head, how, beam, quarter and following seas. The experiment were carried out on board the training ship Pusan 404(160 GT) in the adjacent waters off NAM HYENG JAE DO on Dec. 13th 1994. The sea condition during the measurements was that wave height 2.5m, no swell and the wind velocity of 12 m/sec. Some statistic considerations were given to the observed data by the series analysis methods and discussed in this paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.727-730
• /
• 2004

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MD-ARS) might be one candidate of several systems against the ship's rolling. In this paper, three types of MD-ARS, two passive and one active devices, are developed for small ships. After they are installed on the cabin of the small leisure boat, respectively, a series of test is conducted before and after operating them. Through the test, it is confirmed that the roll responses of the ship are pretty well reduced by the system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.731-736
• /
• 2004

The exhaust noise of auxiliary engine in ships is directly transmitted to bridge wing with only distance attenuation. It is not easy to find out practical treatment to be applied between exhaust pipe and bridge wing to reduce the transmission of the exhaust noise. In general, therefore, a silencer is fitted to reduce the exhaust noise and correspondingly noise of bridge wing. The silencer should be properly designed under the consideration of the frequency component of the exhaust noise and the required performance such as noise reduction or insertion loss. In general, the gas inside the exhaust pipe flows with high temperature and speed and thus onboard test condition is more adverse than the standard atmospheric condition. In this study, the test method to evaluate silencer performance using a probe microphone is introduced.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.458-465
• /
• 2005

Sensitivity Analysis(SA) is used to predict how the model response varies according to changes in the model parameters. With SA, confidences in models which are developed to approximate certain processes and their predictions can be increased. The influences of hydrodynamic coefficients on the prediction of manoeuvrability are examined by SA of direct method. The equations of motion used are the standard equations of motion for submarine(Gertler 1967), and submerged bodies with three different appendages are considered. Through numerical simulations of three kinds of sea trials, the sensitivities of motions to hydrodynamic coefficients are found. Changes of sensitivities during trials are found to be highly dependent on the actuator scenarios and geometry of submerged body.