• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1293-1296
• /
• 2007

In this paper, present a finite element method to reduce vibration of a cylindrical structure by avoiding resonance between motor and structure. To analysis the modes of structure, some different FE models (different places and combinations of ribs) of the structure with free-free condition were built and compared.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.67-71
• /
• 1990

This study is concerned with the optimum design of stiffened cylindrical members frequently found in floating offshore platforms with constraints on reliability. Minimised is the expected total cost which is composed of the structural cost and the expected failure cost. Some design requirements drawn from variotus design codes are also considered as constraints. Reliability of critical component in a structure only is considered in this paper and the system failure is discarded since the probability of system failure is in general much smaller than the probability of component failure and it is very difficult to evaluate the cost due to system failure. Ultimate strength only is considered and not the fatigue strength. Several parametric studies are illustrated and the optimum solutions for different strength models which are now in use for the design of stiffened cylinders are derived to show the optimum designs against different strength models for the same type of structural component. The present results lead to the important conclusions relating to the posibility of more cost saving in the design of such structure through the reliability-based optimisation process.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.231-233
• /
• 2010

최근 어항에도 친환경항만을 건설하기 위한 노력이 국제적으로 확산되고 있으며, 우리나라에서도 어항의 정비 및 재개발부분에서 적극적으로 수질개선을 위한 기술 적용이 본격화 되고 있다. 본 연구는 우리나라 남해의 소규모 어항 및 해수욕장에 슬릿형 해안 구조물이 시공된 실해역의 실측자료와 수치해석을 통해 현장적용성의 분석을 수행하였다. 수치실험으로는 파랑작용 평형방정식을 이용하는 SWAN 모델을 구성하고 수리모형실험에서 분석된 실린더 슬릿형 방파제의 반사와 투과계수를 모텔에 도입하였다. 수치실험은 한국해양연구원의 전해역 심해설계파 추정 보고서 II (2005)중의 심해설계파 제원을 사용하였으며, 대상해역의 1970년~2006년 (37년간) 관측된 연최대 풍속자료를 이용하여 모델에 반영하였다. 설리항에서 S, SSE, SE계열의 파랑의 내습에 대한 분석을 수행하였으며, 그 결과 구조물이 항내에서 정온도가 유지되며 해수순환에도 이점이 있음을 현장관측 자료분석과 수치실험결과를 통하여 확인할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.339-339
• /
• 2011

기존의 광학리소그래피방법으로는 나노크기의 패턴을 형성하는데에 있어서 많은 제약이 있으며, 사실상 수십나노크기의 패턴을 형성하는데에는 전자빔리소그래피등 새로운 패턴형성 방법이 요구되고 있다. 블록 공중합체를 이용한 나노 패턴은 서로 다른 화학적 구조를 가지는 고분자들이 공유결합으로 연결되어 있는 분자구조를 이용하여, 하나의 분자 내에 서로 다른 블록들이 상분리를 일으키려는 것과 동시에 이들의 공유결합으로 인해 그 정도가 제한되는 것을 이용하여 라멜라, 실린더, 구 등의 주기적으로 배열된 형태의 구조물을 형성하는 패터닝 기술이다. 블록 공중합체를 이용한 나노크기의 패턴 형성은 열역학적으로 안정적인 구조이며, 대면적으로 구현 할 수 있어서 차세대 소자제작을 위한 제작기술로 많은 관심을 가지고 있다. 하지만 블록공중합체를 이용한 나노패턴 기술은 선행적으로 나노구조체를 결함이 없고, 원하는 형태로 제작 할 수 있는 공정의 확립이 필요하다. 따라서 본 연구에서는, 이러한 블록 공중합체을 이용한 나노패턴을 제조하는 공정에서, 폴리스틸렌과 실리콘 산화물 박막과의 표면반응을 막기 위한 Self-Assembly Monolayers (SAMs) 처리 공정이 패턴 형성에 미치는 영향을 알아보기 위하여 MPTS의 농도 및 처리시간을 변화시켰다. 나노패턴을 분석, 확인하기 위하여 Atomic Force Microscopic (AFM)과 Field Emission Scanning Electron Microscope (FESEM)을 이용하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.82-91
• /
• 2000

In this study, a numerical scheme based on physical optics method is developed to predict RCS of perfectly conducting body. The scheme is verified through the comparisons of numerical values of cylinder and sphere with analytical ones. It is also applied to compute RCS of a fast naval craft. Major reflection of this ship at threat angle of 0 degrees is found to be due to superstructure and stern part of main hull. In order to investigate the shaping effects on the ship. inclination angles of the stern of main hull and superstructure are set to 12 degrees. The RCS of the ship with shaping is proven to be much reduced in comparison with one without shaping.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.448-457
• /
• 2010

Vibrations and wave propagations in waveguide structures can be analysed efficiently by using waveguide finite element (WFE) method. The WFE method only models the 2-dimensional cross-section of the waveguide with finite elements so that the size of the model and computing time are much less than those of the 3-dimensional FE models. For cylindrical shells or pipes which have simple cross-sections, the external coupling with fluids can be treated theoretically. For waveguides of complex cross-sectional geometries, however, numerical methods are required to deal with external fluids. In this numerical approach, the external fluid is modelled by the boundary elements (BEs) and connected to WFEs. In order to validate this WFE/BE method, a pipe submerged in water is considered in this study. The dispersion diagrams and point mobilities of the pipe simulated are compared to those that theoretically obtained. Also the acoustic powers radiated from the pipe are predicted and compared in both cases of air and water as an external medium.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.364-380
• /
• 2006

This paper presents a procedure for designing command to maneuver flexible structure with very little residual vibration, even in the presence of modeling errors. For the open loop maneuver, the various shaped profiles using multiple step inputs delayed in time are considered for robustness and compared with the responses of rigid body and flexible body in virtue of simulations and experiments. Input shaping generates vibration-reducing shaped commands through convolution of an impulse sequence with the desired command. A flexible model with a cylindrical hub and four symmetric appendages is considered to examine the responses to real plant, and to illustrate the effectiveness of the proposed shapers. The appendages are long and flexible, leading to low frequency vibration under any control action. It is shown by a series of simulation that a properly designed feedback controller with input shaper performs well, as compared with open loop controller with input shaper. The control objective is to achieve a fast settling time of residual vibration to flexible structure and robustness (insensitivity)to plant uncertainty, to eliminate residual vibration.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.3
• /
• pp.130-138
• /
• 2002

수압실험 동안 광섬유 브래그 격자(FBG) 센서를 이용하여 필라멘트 와인딩된 복합재료 탱크의 변형률을 모니터링하였다. 20개의 FBG 센서와 20개의 스트레인 게이지를 복합재료 탱크의 돔과 실린더 부분에 부착하였다. 광섬유 센서를 위한 고출력 광원으로는 파장 이동 광섬유 레이저(WSFL)을 이용하였다. 실험결과로부터, 많은 수의 센서를 필요로 하는 대형 구조물의 건전성 모니터링에 FBG 센서 시스템이 유용함을 확인할 수 있었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.94-103
• /
• 2018

The purpose of designing composite lattice structure which applied to launching vehicle and tactical missile body is to minimize the thickness and weight for applied load. It is usually made of carbon fiber; fabricating with filament winding process over silicon mold, and provided with a window opening for inspection purpose if necessary. In this paper compression test is conducted without window opening in lattice structure and preliminary FEA is carried out to confirm its accuracy. And then FEA is performed for the case of window opening to evaluate the soundness and the safety factor of the structure. We have calculated for two kinds of window shape; rectangular one and hexagonal one. And we have calculated safety factors of the lattice structure with window opening in every case based on failure strength of rib and knot with varying the thickness and location of the window for hexagonal shape. Through our investigation, we have found out the followings; (1) the hexagonal shaped window is shown higher safety factor than rectangular one, (2) a window in a certain location is shown higher safety factor than others, (3) although the soundness of window structure is improved as increasing its thickness, a window of a certain thickness is shown higher safety factor than others because of stress concentration.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1096-1099
• /
• 2007

Hydrophone system has necessarily additional structures to resist installation and operation for military usage. In this paper, we assume that the hydrophone is a rigid circular cylinder and the neighborhood structure is a perfect reflector. Scattering fields by hydrophone and neighborhood structure are investigated to use a boundary element analysis program, SYSNOISE, which has an acoustic analysis capability. The pressure fields around circular cylinder with respect to the angle are evaluated.