• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.70-76
• /
• 2012

For Analysis and evaluation of ALC carbonation, ALC with various specific gravity was fabricated and silicate and siloxane were used for spraying on ALC surface. Silicon oil of water repellent was added to ALC slurry. ALC carbonation related with specific gravity and carbonation degree was decreased with specific gravity. It was guessed that permeation of $CO_2$ gas reduced depend on compact structure of ALC. ALC which sprayed silicate and siloxane represented more excellent carbonation resistance than Ref. ALC. ALC added silicon oil represented most excellent carbonation resistance.

• Resources Recycling
• /
• v.3 no.3
• /
• pp.27-31
• /
• 1994

We tested the limestone sludge produced in Pohang Iron & Steel Co., Ltd. as a filler powder for the effective use of portland cement. Hydration process was investigated by measuring the hydration rate, the amounts of non-evaporable water and compressive strength of cement-limestone sludge paste prepared by mixing limes-tone sludge with cement. The results obtained in this study can be summarized as follows: 1. There is no significant difference between the cases of adding up to 10% limestone sludge and those of unmixed cement system. However the reaction rate increases in the 5% limestone sludge system(due to the effects of fine). 2. The compressive strength increases proportionally with increasing the measured amount of non-evaporable water, Adding 5% limestone sludge also increases the strength a little higher, and the compressive strength and calcium silicate hydrates. In the case of the mixed limestone sludge, $2\theta$=$11.7^{\circ}$ peak appears in the samples of 28 days hydration. This peak indicted the presence of calcium carboaluminate hydrate. Although limestone sludge is generally regarded as a inert materials, some kinds of cement can produce a calcium carboaluminate by reacting with aluminate in cement pastes.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.167-177
• /
• 2018

The Bayon style Avalokitesvara statue from the $13^{th}$ century Angkor period is on display at the Cambodia Angkor Conservation Office. This statue is composed of dark green felthspathic greywacke, the surface of which has been shown light brown discoloration, detected calcite crystallization. As a result of condition assessment, the statue was damaged due to overlap scaling and cracking. Ultrasonic tests have investigated remarkable physical weathering area, flaking and fragmentation in lower velocity. The physical condition of the statue requires a conservation method that improves the binding power. To protect against salt weathering and to ensure physical stability, new conservation material composed of mixed ethyl silicate and sandstone powder similar to that composing the statue was created. The material affected by damage was removed and replaced with the new conservation material.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.141-147
• /
• 2007

Dental properties of polymer composite loaded with hybrid filler of barium silicate (BaSi) and hydroxyapatite, which is a principal component of human bone material, were investigated. A visible light system was utilized to activate the acrylic resin matrix of the composite. Based on the experimental results, it was found that mechanical strength of the composite was consistently increased with an increase of BaSi content in the hybrid filler. And those value rose above the dental specification enough to apply for dental materials. However, abrasion resistance was slightly decreased with increasing BaSi content in the filler. Depth of cure value was 6 to 9 mm applicable for dental restoration irrelevant to hybrid filler composition. On the other hand, there was no strict trend between filler composition and polymerization shrinkage as well as degree of conversion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.180-180
• /
• 2013

희토류 이온이 치환 고용된 실리케이트계 형광체는 자외선으로 여기될 때 높은 발광 효율을 나타내기 때문에 광전 소자, 레이저, 형광램프에 응용할 수 있는 발광 재료로 상당한 관심이 집중되고 있다. 본 연구에서는 고상반응법을 사용하여 초기 물질 (99.99% 순도), (99.99%), (99.9%), (99.9%)을 화학 정량으로 준비하여 활성제 이온 Eu3+와 Sm3+의 함량비를 0, 0.01, 0.05, 0.10, 0.20 mol로 변화시켜 BaSiO3:RE3+ (RE=Eu, Sm) 형광체를 제조하여 그것의 발광과 흡광 특성을 조사하였다. Eu3+ 이온이 도핑된 BaSiO3 형광체의 경우에, 발광 스펙트럼은 모든 시료에서 전이에 의한 발광 스펙트럼을 보였으며, 특히 j=2에서 가장 강한 적색 형광이 피크 620 nm에서 관측되었다. 상대적으로 발광 세기가 약한 595 nm 에 정점을 갖는 주황색 발광과 705 nm 에 피크를 갖는 적색 발광 스펙트럼이 관측되었다. Eu3+ 이온의 함량비가 0.15 mol 일 때 세 영역의 발광 스펙트럼의 세기는 최대값을 나타내었다. 주흡광 스펙트럼은 Eu3+ 이온의 함량비에 관계없이 397 nm에서 관측되었다. Sm3+ 이온이 도핑된 BaSiO3 형광체의 경우에, 모든 시료는 Sm3+ 이온의 함량비에 관계없이 전이에 의한 발광 스펙트럼을 보여주고 있으며, 특히 j=7/2에서 가장 강한 주황색 형광이 피크 603 nm에서 관측되었다. 상대적으로 발광 세기가 약한 567 nm에 정점을 갖는 황색 발광과 651 nm에 피크를 갖는 적색 발광 스펙트럼이 관측되었다. Sm3+ 이온의 함량비가 0.05 mol 일 때 세 종류의 발광 스펙트럼의 세기는 최대값을 나타내었다. Sm3+ 이온의 함량비가 더욱 증가함에 따라 모든 발광 스펙트럼의 세기는 순차적으로 감소하였는데, 이 현상은 농도 소광 현상에 기인함을 알 수 있었다. 주 흡광 스펙트럼은 Sm3+ 이온의 함량비에 관계없이 406 nm에서 관측되었으며, 이밖에도 상대적으로 세기가 약한 흡광 스펙트럼이 237 nm, 377 nm와 476 nm에서 관측되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.714-717
• /
• 2004

알루미노 보로실리케이트계 유리 기본조성 중 알칼리 토류 산화물의 종류 및 함량 변화에 따른 저유전율/저 LTCC 배선 기판의 저온 소성 거동 및 유전 특성을 조사하였다 알칼리 토류 산화물의 종류 및 함량 변화를 통해서 LTCC의 적정 소성온도인 $875^{\circ}C$ 부근을 포함하는 넓은 대역으로 소성수축이 시작되는 온도를 제어할 수 있었으며 유리 프리트와 알루미나 필러의 배합 비율의 변화에 따른 소성거동 및 유전특성의 변화 거동을 조사하였다. 알칼리 토류 산화물 중 유리 조성내의 CaO의 함량이 증가할수록 유리전이점 및 연화점을 증가하는 경향을 보였으며, 알루미나 필러의 첨가량이 증가할수록 소성수축이 시작되는 온도영역은 상향되고 유전율 및 품질계수는 증가하였다. 알칼리 토류 산화물의 조성과 필러인 알루미나의 함량을 제어함으로서 $875^{\circ}C$에서 18% 이상의 선수축율과 유전율 $5.1\sim5.5$ 및 유전손실 0.1% 이하의 우수한 특성을 갖는 저온소결용 LTCC 배선 기판을 얻을 수 있었다.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.2
• /
• pp.21-28
• /
• 2009

A grouting method has been widely used in construction of large-scale structure to reduce permeability and reinforce the ground. If cement and grout material were not mixed well in the injection tip equipment, an opposite flow and interception state of the chemical grouting can occur. McG (Multi-mixing counterflow prevented Grouting, McG) method installed a special grouting device to allow better mixing of the grouting material(above fineness $6,000cm^2/g$) and prevent backward flow. The block of nozzle also diversify powder rate of cement. YSS (Youngil Special Silicate, YSS) that lowers $Na_2O$ and thereby increases durability was developed by gel-forming reaction material. The seepage state and unconfined compressive strength of the injection material using the special injection tip equipment was tested in this study. The results of this study showed that the uniaxial compressive strength, permeability, N-value, TCR and RQD were improved by this method. Engineering characteristics obtained by the special injection tip method will be compared with those by the other method through various field tests from now on.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.53-59
• /
• 2012

In this study, strength and durability of a geo-polymer grout material(HIT) was investigated through unconfined compression strength tests(UCS)), scanning electron microscope(SEM), elution tests, and surface observations. UCS tests showed high initial strength and rapid continuous strength increments when compared to labile wasser glass(LW) and space grouting rocket system (SGR) grout materials, which showed strength reduction after 28 days. The higher strength was also reflected in SEM results which showed calcium silicate hydroxide(C-S-H) gels of the dense hydrate range, indicating higher strength and durability. Additionally, elution tests and grout surface observations showed HIT was in good condition and the decrease in weight was minor when under water for six months. LW and SGR showed the grout surface to be constricted and lower durability due to higher weight increase. These results and observations show HIT to be better suited for coastal structural applications than LW and SGR in long terms of strength and durability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.71-77
• /
• 2010

The concrete structure's durability and integrity is reduced owing to various deterioration phenomena. Therefore, it is important to prevent the deterioration phenomena. This study inquired into the various experimental results of specimens with different dilution concentration and impregnation time by the each solution to present the economic and efficient using method of the inorganic surface penetration agents. As a results, the reasonable dilution concentration and impregnation time of colloidal silica solutions are 15% and 5 minute and for the sodium alumina silicate solutions are 17% and 10 second.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.79-85
• /
• 2006

Olefinic compatibilized blend(R-PP/R-PE)/layered silicate composites have been prepared by melt intercalation technique directed from $Na^{+}$ montmorillonite(MMT) or organophilic montmorillonites while using magnesium hydroxide as flame retardant. Morphology and flammability properties were characterized by X-ray diffraction(XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM), thermogravimetry analysis(TGA), limiting oxygen index(LOI), UL94 test. It is found that the compatibilized blend/layered silicate(Cloisite 20A) nanocomposites have a mixed immiscible-intercalated structure and there is better intercalation when a compatibilizer is combined with the polymer and layered silicate to be melt blended. A very large increase in the LOI value was observed with hybrid filler addition and further enhancement in thermal stability and compatibility of blend was obtained for the compatibilized blend containing small amount of layered silicate.