• Culinary science and hospitality research
• /
• v.21 no.2
• /
• pp.103-118
• /
• 2015

This study is intended to look into the effect of dining space color and design on customers' psychological response, satisfaction, and reuse intention of restaurants. To achieve this, an empirical survey was carried out based on responses from 400 dining-out customers. The results were as follows. The dining space color and design had a significant and positive effect on customers' psychological reaction, satisfaction and reuse intention of restaurants. This is a result of positively evaluated service through an increased customer emotional response to simultaneous factors. It also suggest a recognition of a customer's psychological response in forming images based on restaurant attributes aside from food quality, such technique, ornamental equipment, sound, and design factors harmonized with indoor environment, in an attempt to increase customer interest in an increasingly competitive business environment. Consequently, dining space color and design can lead to customers' psychological satisfaction and reuse intention.

• Journal of the Korean housing association
• /
• v.18 no.2
• /
• pp.21-27
• /
• 2007

Various buildings constructed by environmentally friendly resources are being built in KOREA. Especially as the wood has distinctive ecological merits in comparison with reinforced concrete and brick, the buildings made by the wood are acknowledged with its superiority of ecological value. Enough field studies for their thermal environment, however, haven't been done. In this study, to investigate indoor environmental condition and occupants' response to it of Log Cabin in Gyeongsangnam-do Hamyang Country Jirisan Natural Recreation Forest, examination of indoor thermal environment and field subjective evaluation have been done in that fundamental information of thermal environment characteristics can be suggested. The results are following; 1) Thermal environment of the Log Cabins; Indoor and outdoor mean dry bulb temperature were $21.9^{\circ}C$ and $-3.1^{\circ}C$, and Indoor and outdoor average relative humidity were 25.8% and 52.1%. These results are below ASHRAE; dry bulb temp. $22.0^{\circ}C$, humidity 30%, and above domestic standards; dry bulb temp. $18{\sim}20.0^{\circ}C$, humidity $40{\sim}60%$. 2) Result of subjective evaluation; Thermal sensation and its comfort were evaluated as 'slightly uncomfortable' because of 'slightly warm'. And humid sensation and its comfort were evaluated as 'slightly uncomfortable' because of 'slightly warm'. 3) Result of vertical temperature and humidity; Vertical temperature difference from head to ankle was $0.54^{\circ}C$ which means most occupants may feel comfortable.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.11
• /
• pp.47-54
• /
• 2010

Nowadays, geosynthetics for reinforcement and protection are widely applied to the waste landfill site. Current research indicates the potential for progressive failure in geosynthetic-soil system depends on the interface shear strength governed by several intrinsic factors such as moisture, normal stress, chemical, etc. In particular, the effect of the acidity and basicity from the leachate is intensively reviewed to assess the chemical reaction mechanism of interface shear strength under the cyclic loading condition. New multi-purpose interface apparatus(M-PIA) has been manufactured and the cyclic direct shear tests using submerged geosynthetics and soils under the different chemical conditions have been performed, consequently, the thickness of interface and shear stress degradation are verified. The basic schematic of the Disturbed State Concept(DSC) is employed to estimate the shear stress degradation in the interface, then, normalized disturbed function is obtained and analyzed to describe the shear stress degradation of geosynthetic-soil interface with chemical influence factors under dynamic condition.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.505-512
• /
• 2010

Generally, the repeated traffic loading condition should be considered to predict the long-term deformation on road foundations or foundation systems. However, it is not easy to estimate long-term deformation on multi-layered system like roads and railways. For more quantitative analysis, mechanistic-empirical approach requires proper analytical tool, material's model, and material properties of foundation geomaterials under both traffic and environmental loadings. In this study, therefore, laboratory data from the long-term repeated load triaxial tests were used to predict accumulated deformation on pavement foundations and the results were analyzed based on the nonlinear models and stress state considered. All these results are presented and verified on laboratory based scale using the finite element analysis with the deformation characteristics of foundation geomaterials at various stress states.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.467-470
• /
• 2010

USN(Ubiquitous Sensor Network) is the network that widely applies for life of human being. It works out to sense, storage, process, deliver every kind of appliances and environmental information from the stucktags and sensors. And it is possible to utilize to measure and monitor about the place of environmental pollution which is difficult for human to install. It's studied constantly since it be able to compose easily more subminiature, low-power, low-cost than previous one. And also it spotlights an important field of study, graft the green IT and IT of which the environment and IT unite stragically onto the Network. This study realize a IAQM(Indoor Air Quality Management) sensing mechanism composition under the network and suggest the application of Environment monitoring system outlook to measure an Environment element.

• Archives of design research
• /
• v.16 no.4
• /
• pp.313-322
• /
• 2003

The residential and welfare facilities for the elderly are continuously increasing due to change of value on family under situation of aging population increase. And it is predicted that accommodation capacity of facilities for the elderly and its rate those facility takes compared to whole social welfare facilities will be accelerated considering past increase speed. On the other hand, about 60％ of elderly people have low physical and mental level almost dose to handicapped people therefore special environmental concerns helping their independent living are necessary. The purpose of this study is to analyze whether facilities for the elderly are adequate to accommodate their request condition by understanding color among environmental factors is one of most important factor for smooth understanding, communication and psychological remedy effect for thou. For this purpose, importance and effect of color and visual characteristic and reaction to color in elderly environment are researched through documents and visited 10 facilities in Seoul and Kyunggi region to research interior color status. And measuring of color on 5 main spaces of the facilities such as lobby/lounge, corridor, dining room, bedroom, stairway/ramp are done under analysis of its functional and aesthetic level based on Moon ＆ Spencer's color theory.

• Archives of design research
• /
• no.16
• /
• pp.101-110
• /
• 1996

CHOOSA GORACK which is a typical example of traditional houses in the CHO SEON dynasty consists of the four terraced builfing group. Among those,SADANG CHAI are located in the highest level,and SADANG CHAI and SADANG CHAI are toward south direction.It means that building orientation and level were influenced by the distinction of social level and the idea of ancester worship. Floor and ceiling level in the same building is different which was caused by the distinetion of social level in the CHO SEON dynasty and an ariental dual as a variety of openings,exposed ceilings,and furniture against a wall were creating a typical Korean visual harmony. Although the furniture and equipments were very important elements in ONDOL BANG the occupance ratio of these were low because the free space in BANG should be utilized effectively to accommodate the space variation.Both an AN CHAI and SARANG CHAI were composed by the standard space module called KAN.And interior elements were established by several factors such as the human scale,the behavior pattern in traditional sitting life style, and the lumber size of post and lintel construction of Korean house.BANG and DAE GHUNG, composed of KAN,were expanded and arranged side by side so that the natural light and ventilation through them could be used in the result of the kind of lay out,traffic circulation was disturved.In conclusion,CHOOSA GOTACK was formed by the sirect effice of the KOREAN penisula. However this study was based on one sample. It may not enough to deduct soild conclusion.Therefore continuous and farher study is needed for the sestemane evaluation.

• Environmental and Resource Economics Review
• /
• v.25 no.2
• /
• pp.277-297
• /
• 2016

This study is to analyze the effects of changing pattern of climate vaariables on total factor productivity of Korea manufacture industry. Changes in temperature, rainfalls and humidity which are the representative climate variables are used as main factors. Not only average values of the variables but those highest values are used as independent variables in the model, in order to consider the characteristic pattern of recent climate change, the high volatilities. The OLS results are unlike to previous literature that temperature and humidity had no significant impact on manufacturing productivity. An increase in the amount of precipitation was analyzed that impact negatively impacted. The analysis of panel data showed that temperatures and precipitation all that does not significantly affect the manufacturing. While the increase of the average humidity is shown to increase the total productivity of manufacture industry. In Korea, adaptation capability is important in determining the effects of climate change on productivity of manufacture industry.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.19-19
• /
• 2012

최근 산업환경 변화에 순응하는 환경 친화적 소재를 사용하여 자동차, 선박, 철도 등 수송용 인테리어 내장재를 구성하는 기술로서, 난연성 및 기계적 물성 유지 기술, 그리고 실내 쾌적감을 부여하기 위한 감성기술 및 심미적 요소를 부여하는 디자인 기술이 가미된 복합 기능화 기술개발이 구되고 있다. 기존의 자동차용 시트 제품은 대부분 PU Foam을 시트원단에 불꽃으로 Lamination 하는 방식으로 제조되었으며, 이러한 제조 방식은 많은 공정을 거치게 되고 PU Foam을 제조하는 공정 및 불꽃으로 Lamination 하는 공정에서 많은 환경유해가스가 발생하는 등 환경적으로도 많은 문제점을 감수하면서 생산하는 방식이다. 또한 각종 원단의 표피재로 많이 사용되고 있는 PU와 PVC의 경우 제조과정에서 용제와 가소제 사용 등으로 인해 환경적으로 많은 문제점이 있으며, 이를 대체하기 위한 노력이 많은 부분에서 이루어지고 있지만, 마땅히 대체할 소재를 찾지 못하고 있는 실정이다. 본 연구에서 제안하는 실리콘수지는 기존의 PU와 PVC를 대체할 수 있는 소재로서 각광받고 있으며, 응용기술 개발을 통해 충분히 적용이 가능한 소재라고 판단된다. 본 연구에서 개발하고자 하는 기술은 난연성을 가진 실리콘 내장 표피재에 불꽃으로 Lamination하는 공정을 배제한 친환경 PUD Foam을 바로 Back Coating함으로써 일체형 고 기능 친환경 제품을 개발함으로써 친환경 복합화 기술 및 SEAT 원단과 표피재의 일체형 모듈화 공법개발을 이루고자 한다.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.23-36
• /
• 2021

In this paper, the effect of shear rate on internal friction angle and unconfined compressive strength of non-cemented and cemented sand was investigated. A dry Jumunjin sand was prepared at loose, medium, and dense conditions with a relative density of 40, 60 and 80%. Then, series of direct shear tests were conducted at shear rates of 0.32, 0.64, and 2.54 mm/min. In addition, a cemented sand with cement ratio of 8% and 12% was compacted into a cylindrical specimen with 50 mm in diameter and 100 mm in height. Unconfined compression tests on the cemented sand were performed with various shear rates such as 0.1, 0.5, 1, 5 and 10%/min. Regardless of a degree of cementation, the unconfined compressive strength of the cemented sand and the angle of internal friction of the non-cemented sand tended to increase as the shear rate increased. For the non-cemented sand, the angle of internal friction increased by 4° at maximum as the shear rate increased. The unconfined compressive strength of the cemented sand also increased as the shear rate increased. However, its increasing pattern declined after the standard shear rate (1 mm/min). A discrete element method was also used to analyze the crack initiation and its development for the cemented sand with shear rate. Numerical results of unconfined compressive strength and failure pattern were similar to the experimental results.