• Title/Summary/Keyword: 실내공기제어

Search Result 84, Processing Time 0.031 seconds

자동차용 엔진의 연구동향

  • 이성렬
    • Journal of the KSME
    • /
    • v.28 no.5
    • /
    • pp.469-475
    • /
    • 1988
  • 연료소비율의 향상은 점차 감소되어 가는 경향에 있다. 그 원인은 3원촉매변환기 채용에 의한 이론공기연료비의 사용, 기관의 연소개선이 발전하여 고압축비화에 의한 연료소비율 향상이 더 이상 어렵게 되었다는 점을 들 수 있다. 한편, 고압축비화의 역효과로는 연소실내 최고압력이 증가하여 각부의 강도나 기관 소음의 문제가 대두된다. 이들 역효과를 타파하여 충분한 연료 소비 향상을 얻을 수 있는 수단이 단기적인 과제가 될 것이다. 전자제어, 희박연소, 마찰저감 등 통상의 엔진의 개량에 대한 노력이 계속될 것이다.

  • PDF

바닥 급기 공조의 전망

  • 김영일
    • The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
    • /
    • v.30 no.8
    • /
    • pp.54-59
    • /
    • 2001
  • 바낙 공기 급기(UFAD, underfloor air distribution)는 사무실과 상업 건물의 공조를 위하여 바닥 하부 공간을 사용하는 혁신적인 기술이다. 북미에서는 UFAD가 기존 천장 공기 급기 방식에 비하여 많은 장점을 지니므로 그 수요가 날로 증가하고 있다. 잘 설계된 UFAD 시스템은 다음과 같은 장점을 지닌다. - 건물의 용도 변경에 따픈 유연성이 우수하므로 건물의 생애 주기 비용을 감소시킨다. - 개별 쾌적성 제어가 가능하므로 온열 쾌적성, 거주자의 만족도 그리고 생산성을 향상시킨다. - 거주자주변에 직접 선선한 공기를 공급하므로 환기 효율, 실내 공기질 그리고 건강 상태를 향상시킨다. - 이코노마이저 운전, 온도 성층화 그리고 낮은 정합 운전에 의하여 에너지 비용을 감소시킨다. - 설비 공간이 축소되고 표준 철골 구조에서는 콘크리트 구조체 변경이 가능하므로 새 건축 공법에서는 충고를 감소시킬 수 있다. 1995년까지만 해도 UFAD는 파격적인 설계 기법이라고 여겨졌지만, 이제 설계자와 건축업자들은 2004년까지 신축되는 사무용 건축품의 35%는 바닥을 높인 기법이 적용되며 이 중 반 정도가 UFAD를 채택할 것이라고 예측하고 있다. 2000년 2억불이라고 추정되던 바닥을 높이는 건축의 시장 규모가 2004년에는 최소 10억불이 되리라고 예측된다. UFAD는 기본 연구에 의한 정립된 표준화된 설계 기법과 지침이 아직 마련되지 않았음에도 불구하고 현재 설계, 시공되고 있다. 이라한 경향은 펄수적인 연구가 수행되어 관련 업계가 지식과 경험을 충분히 쌓기 전까지는 계속될 전망이다. 본고는 시스템 설계와 운영의 주요한 특징, 기존 방식과 비교하여 지니고 있는 잠재적인 장점, 한계와 기술 개발의 필요성, UFAD 기술 개발을 위하여 계속적으로 요구되는 연구 분야 등을 서술함으로써 현재 UFAD 기술에 대한 평가를 한다.

  • PDF

Adsorption Study of IAQ Index CO2 (실내공기질 지표 이산화탄소 농도제어를 위한 흡착연구)

  • Wang, Jie;Jo, Young Min;Oh, Jongmin;Heo, Jeong Sook
    • Journal of Environmental Impact Assessment
    • /
    • v.29 no.3
    • /
    • pp.198-209
    • /
    • 2020
  • In this study, electrospun nanofibers made of PAN (polyacrylonitrile) were activated through a physical method to obtain an optimized pore structure. In particular, to enhance the surface alkalinity, the activated carbon fibers (ANFs) were impregnated with tetraethylenepentamine (TEPA) with the aid of HNO3. Then, the low level (3,000 ppm) CO2 adsorption capacity for each ANF sample was evaluated. The specific surface area of ANFs increased from 308.4 ㎡/g to 839.4 ㎡/g and the total pore volume increased from 7.882 ㎤/g to 27.50 ㎤/g. Although the TEPA impregnation reduced the specific surface area and pore volume of the ANFs due to blocking of micropores, the HNO3 pre-oxidation enhanced the amino groups tethered, increasing the amine content from 6.42% to 17.19%, and finally, increased the adsorption capacity of CO2. This study showed that the sample 60-ANF-HNO3-TEPA, which was activated for 60 minutes and was impregnated with HNO3 and TEPA, had the best adsorption capacity for low level (0.3%) CO2 (in a binary mixture with N2).

The behavior of corrosion potential in the mortar-embedded (부식된 철근을 사용한 모르타르의 환경에 따른 부식전위의 거동)

  • 이상호;한정섭;권순석
    • Journal of Ocean Engineering and Technology
    • /
    • v.10 no.4
    • /
    • pp.103-108
    • /
    • 1996
  • To syudy the change of prtential in the mortar-embedded precorroded rebar, a half cell method was adapted. The rebar was corroded by the salt spray and then the rebar embedded in the mortar. A saturated copper sulfate feference electrode was used. The corrosion potential of the rebar in the mortar specimen cured in air was increased, whereas that of the rebar cured in water was decreased with aging. The corrosion potential of the rebar in the mortar was decreased with corroded time by the salt spray. As the mortar thickness covered the rebar was increased, the corrosion potential of the rebar in the mortar was increased.

  • PDF

Experimental study on heating performance characteristics of electric heat pump system using stack coolant in a fuel cell electric vehicle (연료전지 스택 폐열 활용 전동식 히트펌프 시스템 난방 성능 특성 연구)

  • Lee, Ho-Seong;Kim, Jung-Il;Won, Hun-Joo;Lee, Moo-Yeon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.12
    • /
    • pp.924-930
    • /
    • 2018
  • The objective of this study was to investigate heating performance characteristics of electric heat pump system in a fuel cell electric vehicle (FCEV). In order to analyze heating performance characteristics of electric heat pump system with plate-type heat exchanger using stack coolant to evaporate the refrigerant, R-134a, each component was installed and tested under various operating conditions, such as air inlet temperature of inner condenser and compressor speed. When the air inlet temperature of inner condenser was varied from $0.0^{\circ}C$ to $-20.0^{\circ}C$, heating capacity was not quite different due to similar temperature gap between inlet and outlet of inner condenser with electric-driven expansion valve (EEV). However, COP increased until certain EEV opening, especially under 45.0%, because of decreasing power consumption. According to the compressor speed variation from 2,000 to 4,000 RPM, heating capacity and COP were found to have opposite trend. In the future works, stack coolant conditions as the heat source for tested heat pump system were analyzed with respect to heating performance, such as heating capacity and COP.

Design and Development of IoT-based Indoor Environment Management Platform (IoT 기반의 실내환경 관리 플랫폼 설계 및 개발)

  • Lee, Wan-Jik;Kim, Se-Jin;Yoon, Jun-Keun;Jeong, Ja-Woon;Heo, Seok-Yeol
    • The Journal of the Convergence on Culture Technology
    • /
    • v.7 no.1
    • /
    • pp.654-661
    • /
    • 2021
  • Air pollution caused by industrial development has become a level that can seriously threaten human health. In general, indoor air pollution is considered to be lower than outdoors, but modern people live indoors most of the time, thus it is essential to keep the indoor air quality comfortable in order to take care of one's own health and improve the quality of life. Therefore, the development of an indoor environment management platform using Internet of Things and data processing technology, which is currently drawing attention, is considered a very meaningful study. In this paper, we designed an IoT-based management platform that can remotely monitor and control indoor environments. In addition, the functions of the IoT terminal, gateway, and data server constituting the platform were implemented using open source and open libraries, and all functional operations were also verified. In particular, the IoT terminal and the gateway in this paper exchange data using BLE communication, so they can operate with relatively low power and since the gateway uses the BLE Advertising mode, it has the advantage of automatically recognizing IoT terminals that have not been previously configured.

전기화학식 이산화탄소 센서

  • Park, Jong-Uk
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2011.05a
    • /
    • pp.16.2-16.2
    • /
    • 2011
  • 이산화탄소는 인체에 무해하지만 인간의 신진대사와 깊은 관련이 있기 때문에 인간의 정신적 육체적 행동을 제어하는 분야에 많이 응용되고 있다. 따라서 지능형 빌딩이나 고급 공동주택 등의 실내공기를 제어하는 시스템에 적용되어 효율적으로 환기시스템을 운용하는데 사용되어져 왔다. 앞으로 이는 에너지절감과 연동되어 자동차나 가전제품 등 앞으로 점점 밀폐되어가는 구조에 사용이 늘어날 것으로 전망된다. 그러나 종래는 이산화탄소가 특정파장(4.2 um)의 적외선을 흡수하는 성질을 이용하여 Lambert law에 의해 이산화탄소의 양을 측정하였다. 따라서 가격이나 크기가 비교적 경제적이지 못한 측면이 많았다. 이와 반대로 전기화학적인 방식은 가격이나 크기의 측면에서 장점이 있었으나, 초기동작시간이나 안정성, 수명 등에서 상용화되기에는 아직 소비자가 이해하기 힘든면이 많았다. 이에 고체전해질을 이용하여 수명이나 초기시간 및 안정성을 획기적으로 개선하여 상용화가 가능하도록 만든 이산화탄소 센서를 소개하고자 한다. 이 센서는 전자회로와 결합되어 사용이 편리하도록 모듈화 하였고 이 모듈을 사용하여 "airwatch"라는 응용제품으로 판매되고 있다.

  • PDF

건설IT융합기술 : 스마트빌딩 기술 개발 사례

  • Baek, Yun-Cheol;Kim, Hyeong-Seok
    • Information and Communications Magazine
    • /
    • v.30 no.10
    • /
    • pp.25-31
    • /
    • 2013
  • 본고에서는 건설기술과 IT기술이 융합된 건설IT융합기술에서 스마트 빌딩과 관련하여 안전, 건강, 편의, 에너지를 위한 기술들로 분류하여 사례와 함께 서술한다. 고층 빌딩의 안전성을 위한 건축 구조물 건전도 모니터링 기술, 빌딩 실내 또는 지하 주차장에서 쾌적한 공기 환경을 유지하기 위한 스마트 환기제어 시스템 기술, 빌딩 정보의 체계적인 데이터 관리를 위한 빌딩정보모델링 기반의 센서와 영상 인터페이스, 스마트 빌딩 네트워크 관리 시스템에 관하여 소개한다. 또한, 에너지 절감을 위한 빌딩 에너지 관리 시스템에 관하여 냉난방, 조명, 환기설비, 전력모니터링 관련 기술에 대하여 설명한다. 이러한 기술들을 적용한 스마트 빌딩은 유무선통신, 스마트디바이스와 같은 IT기술을 건축공학 및 빌딩자동제어, 설비 기술에 적용하여 빌딩 사용자에게는 안전 및 최적 환경을 제공하고 빌딩 소유주나 관리자에게는 관리비용 절감, 관리 편의, 빌딩가치 상승 등을 제공할 수 있다.

Photocatalytic disinfection of indoor suspended microorganisms (Escherichia coli and Bacillus subtilis spore) with ultraviolet light (광촉매와 UVA에 의한 실내 부유 미생물(E. coli 및 Bacillus. subtilis sp.) 살균 제거 연구)

  • Yoon, Young H.;Nam, Sook-Hyun;Joo, Jin-Chul;Ahn, Ho-Sang
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.2
    • /
    • pp.1204-1210
    • /
    • 2014
  • New control methods are proposed for indoor air quality by removing fine airborne dust-particles. As suspended fine dust-particles contain inorganic dust as well as fine organic bacteria, studies for simultaneous control of these contaminants are required. In this study, photocatalytic disinfection of indoor suspended microorganisms such as E. coli and Bacillus subtilis is performed by three types of photocatalysts with UVA irradiation. The UVA irradiation strength was controlled to the minimum $3{\mu}W/cm^2$, and ZnO, $TiO_2$, and ZnO/Laponite ball were used as the catalysts. The results indicate that E. coli was removed over 80 % after about 2 hours of reaction with UVA and all three types of photocatalysts, whereas only with UVA, around 50 % E. coli removal was obtained. Among the catalysts, ZnO/Laponite composite ball was found to have similar sterilizing capacity to $TiO_2$. However, in case of B. subtilis, which has thick cell wall in its spore state, disinfection was not effective under the low UVA irradiation condition, even with the catalysts. Further studies need to figure out the optimal UVA irradiation ranges as well as photocatalysts doses to control airborne dust, to provide healthy clean air environment.