• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.5
• /
• pp.334-340
• /
• 2003

Exponential window function Is widely used In impact hammer testing to reduce leakage error as well as to get a good S/N ratio. The larger its decaying rate is, the more effectively the leakage errors are reduced. But if the decay rate of the exponential window is too large, the FRF is distorted. And the modal parameters of the system can not be exactly identified by modal analysis technique. Therefore, it is a difficult problem to determine proper decay rate in impact hammer testing. In this paper, amount of the FRF distortion caused by exponential window is theoretically uncovered. A new circle fitting method is also proposed so that the modal parameters are directly extracted from impulse response spectrum distorted by the exponential-windowed impulse response data. The results by the conventional and proposed circle fitting method are compared through a numerical example.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.623-629
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the finite record length error and the leakage error. In this paper, the errors in the frequency response function of multi degree of freedom system are formulated theoretically. And the method to remove these errors is also suggested. This method is based on the optimization technique. A numerical example of 3-dof model shows the validity of the proposed method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.10
• /
• pp.792-798
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function (FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the finite record length error and the leakage error. In this paper, the errors in the frequency response function of multi degree of freedom system are formulated theoretically. And the method to remove these errors is also suggested. This method is based on the optimization technique. A numerical example of 3-dof model shows the validity of the proposed method.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.464-470
• /
• 2002

본 연구에서는 초음파를 사과의 비파괴 품질판정에 이용하기 위한 기초 연구로서 사과 표면에 입사, 반사되는 초음파 신호를 계측 및 분석하기 위한 시스템을 구축하고 저장기간에 따른 사과의 초음파 특성을 계측하였으며, 그 결론은 다음과 같다. 1. 구성된 비 접촉식 초음파 장치를 이용하여 전압-시간 그래프에서 전압의 진폭(PTP)값을 구하였고 신호처리용 프로그램을 이용하여 획득한 신호를 주파수 영역에서 분석하여 피크주파수, 영역별 에너지 밀도함수 등을 구하였다. 2. 사과의 초음파 특성을 분석한 결과 사과의 저장기간은 초음파 응답신호의 진폭(PTP) 및 제 3영역 에너지 스펙트럼 밀도함수와 높은 상관성이 있는 것으로 나타났다. 3. 초음파를 농산물의 비파괴 품질판정에 적용시 문제가 되고 지는 센서와 시료와의 접촉응력에 의한 응답신호의 변형에 의한 문제를 해결하고자 비 접촉식 센서를 사용하였으며, 실제 농산물에 적용이 가능한 것으로 판단되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1491-1497
• /
• 2009

Existing methods to measure are based on ToA (Timer of Arrival), RSS (Received Signal Strength), AoA(Angle of Arrival) and other methods. In this paper, we propose a compensation of ToA and RSS methods to measure more precisely the distance of nodes. The comparison experiments with the traditional ToA method show that the average error value of proposed method is reduced 30%. We believe that this proposal can improve location estimation of sensor nodes in wireless sensor networks.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.5
• /
• pp.789-798
• /
• 2021

In this study, for the purpose of collecting and analyzing target-specific RCS data of target signals simulator for verification/improvement of radar system performance, VHF band monostatic/bistatic RCS of civil aircraft(B-747, B-737) and fighter(F-16) models were analyzed by EM simulation tool. In order to reduce the RCS analysis time, the analysis time and RCS data were compared and cross-verified. Also, the analysis range was selected by examining the interpolation error according to the analysis angle resolution. The RCS data obtained for each model were analyzed separately by the incident/reflection elevation angle and frequency. The RCS characteristics according to the shape of the aircraft and the incident/reflection azimuth angle were described. Finally, the statistical RCS distribution value of each model is presented through RCS distribution histogram analysis. In the future, the RCS database obtained by this study will be used for the target signals simulator of the VHF band radar system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.83-91
• /
• 2005

We analyze the performance of an adaptive hybrid search code acquisition algorithm for direct-sequence code division multiple access (DS-CDMA) systems under slowly-moving mobile environments. The code acquisition algorithm is designed to provide the desired feature of constant false alarm rate (CFAR) to cope with nonstationarity of the interference in CDMA forward links. An analytical expression for the mean acquisition time is first derived and the probabilities of detection, miss, and false alarm are then obtained for frequency-selective Rayleigh fading environments. The fading envelope of a received signal is assumed to be constant over the duration of post-detection integration (PDI), considering slow fading environments. Finally, the performance of the designed code acquisition algorithm shall be evaluated numerically to examine the effect of some design parameters such as the sub-window size, size of the PDI, decision threshold, and so on, considering cdma2000 environments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.244-250
• /
• 2018

Multilateration acquires the transponder signal of target from receivers installed on the ground and calculates the position of the target using the difference of the signal acquisition time of each receiver. One of the factors that influence the positioning accuracy of Multilateration using the TDOA calculation method is the error due to the precision measurement of signal input time. When measuring the signal input time at the receiver, the input signal is sampled using the reference clock of the receiver and a reference sample having the same sampling rate is applied to the cross correlation technique. Therefore, the accuracy of the signal input time is proportional to the reference clock. In this paper, the algorithm for precisely measuring the signal input time by performing cross correlation between the input signal of the receiver and DRS(Delayed Reference Sample) is proposed. In order to verify this, we implemented the pulse signal of the transponder that is transmitted from the target using Matlab. Through the simulation, cross correlation between the proposed DRS and the input signal was performed. From this result, the performance of the precise measurement of signal input time was analyzed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.23-29
• /
• 2003

In this paper, we propose an idea for the improved 3-D sound system using conventional stereo headphones to obtain a better sound diffusion from the mono-sound recorded at an anechoic chamber. We use the HRTF(Head Related Transfer Function) for the sound localization and the wavelet filter bank with time delay for the sound diffusion. And we test the modified HRTF with the various sampling rate. We investigate the effects of the 3-D sound depending on the length of time delay at lowest frequency band. Also the correlation coefficient of the signals between the left channel and the right channel is measured to identify the sound diffusion. At last we obtain the diffusion sound using Cool Edit for reverberation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.32-39
• /
• 2009

Compressed Sensing is a method to sample analog signals at a rate under the Nyquist rate. With this scheme, it is possible to represent signals with a relatively smaller number of measurements than that of the conventional sampling method, and the original signals are reconstructed with high probability from the acquired measurements using the linear programming. Compressed sensing allows measurement time and/or the amount of ADC (analog-to-digital converter) resources for the signal acquisitions to be reduced. In this paper, we presents the backgrounds of the compressed sensing, a way to acquire measurements from an analog signal with a random basis, and the signal recovery method. Also we introduce applications of compressed sensing in wireless communications.