• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.702-708
• /
• 2016

The railway signaling system has evolved to maximize its safety and maintainability based on the experiences in the construction and operation of railway systems. The newly developed systems was established to cope with the changes in an operating environment. In the process of a transition to the new system, both the existing ATS (Automatic Train Stop) and new ATP/ATO (Automatic Train Protection/Automatic Train Operation) systems are operating simultaneously in parallel. In this situation, modifications of the conditions of the interlocking diagram and logic are necessarily required on the existing ATS systems due to the frequent improvements in signaling equipment. This paper reports the enhancement of safety and operational efficiency of the system through an improvement of the security and the interlocking conditions of the existing ATS systems. The independent display of signals for each track was ensured to avoid giving the effect of On/Off signals for the selected track on the opposite side, and the security was improved by adjusting the position and interlocking conditions. In addition, the increased traffic density of railway systems was achieved by removing the unnecessary conditions and detailed signal display, which resulted in enhanced operational efficiency.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.421-428
• /
• 2007

This paper discusses a fitness of the control on intersection network using fuzzy analytic hierachy process. The validity of control of traffic signal on intersection is phase, cycle of intersection. But the aigent of traffic intersection network is relative of intersection article. Therefor the aigent of traffic network intersection is before intersection passing vechile number, delayed vechile number. Fuzzy analytic hierachy process clears the grade of validity of the fixed cycle time controller and adaptive fixed cycle time and fuzzy traffic controller and proposes a new control type a traffic signal by this fuzzy analytic hierachy process.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1065-1066
• /
• 2008

2005년 8월 서울기점 54km에 위치한 고속선 신호기계실에 낙뢰가 발생함에 따라 신호기계실 내부에 설치된 방호스위치 외부회로의 전원공급용 DC/DC 컨버터가 소손 되었다. 그 결과, 폐색구간 작업자 보호용 방호스위치, 역구내 작업자 보호용 방호스위치 계전기 낙하가 발생하여 운행중인 고속선 열차의 정지 속도 코드가 차량에 현시 되었다. 이후 장애 절차에 따라 장애 유지보수가 완료되었지만, 상행선 7개, 하행선 3개 열차가 17분${\sim}$58분간 운행 지연되었다. 본 논문에서는 이러한 낙뢰 장애사고를 분석함으로서 신뢰할 수 있는 신호기계실 낙뢰 피해 방지 방안에 대해 분석하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.90-101
• /
• 2016

This study was initiated to develop an algorithm for traffic condition adaptive optimal traffic signal control for isolated intersections based on the vehicle trajectory data. The algorithm determines the optimal cycle length, phase lengths, phase sequences using the data collected under V2X communication environment every second. In addition, the algorithm utilizes a traditional feature of the actuated signal control, gap-out, using traditional detector systems to consider the mixture of normal vehicles and vehicles equipped with the V2X communication function. The performance of the algorithm was compared with that of the fixed signal timing plan which was optimized with Synchro under a microscopic traffic simulation-based test bed. As a result, the overall performance, including average delay, average stop delay, the number of stops, and average speed, are improved apparently. In addition, the amount of improvement get bigger as the traffic volume in the intersection as well as the number of vehicles equipped with the V2X communication function increase.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.11-21
• /
• 2013

The conventional real-time signal control strategy for oversaturated situation generally requires a number of detectors at the intersection in order to identify the queue length at each approach. Also, existing strategy for the spillback has limited effect due to the temporal spillback control which only reduce the green split at the approach. In this study, a signal control system utilizing the imagery information from ITS roadside equipment is developed for operation of oversaturated intersections. The strategy calculates the saturation ratio based on the queue length extracted from ITS RSE, and designs the signal control variables according to the saturation ratio. The signal control strategy is divided into two phases: oversaturated and supersaturated. In oversaturated conditions, timing plan for main approach is optimized by the queue length. In oversaturated conditions where spillback might occur, the signal timing is designed in order to avoid the spillback. To increase field adaptability, the strategy is designed to adjust the split length, all-red-time, and clearance time, and keep the major signal control variables intact. The result of the simulation shows that in oversaturated conditions, the improvement is similar to the real-time signal control system. In case of, oversaturated conditions, however, the effect of the strategy is superior to that of a real-time system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.45-55
• /
• 2009

This study was intended to increase efficiency of traffic flow management on intersection. The result suggested to establish a left-turn at own risk lane to increase efficiency of traffic flow on intersection. The scope of the research was to investigate the geometric structure of a signal-controlled intersection, traffic volume(density) with respect to directions and traffic signal display, and to select a signalling intersection into which a car waiting for a traffic signal enters by adjusting the display sequence of traffic signal. The delay with respect to directions and for the whole intersection was compared for the current situation and an improvement plan. Using TSIS, a traffic analysis package, the traffic situation on an intersection was investigated. Based on the simulation result for Seok-Jeon intersection in Ma-San selected from the field investigation of intersections to which an improvement plans would be applicable, the waiting time in the direction without a entering traffic signal was decreased to be 78.6 seconds per car and that of the direction expecting the increase of waiting time was increased by 4 seconds per car only. It was confirmed that the waiting time for the whole intersection was improved.

• Journal of Korean Society of Transportation
• /
• v.15 no.3
• /
• pp.93-109
• /
• 1997

현재 사용되고 있는 신호등 설치기준은 교차로의 형태를 반영하고 있지 않다. 본 논문은 신호 및 비신호 T형 교차로에 대한 현장의 지체도 조사를 바탕으로 첨두시간 교통량을 이용한 T형 교차로의 신호등 설치기준을 개발하였다. 기준설정을 위해 교차로의 평균정지지체 최소화를 평가척도로 사용하였으며 주요 연구결과를 요약하면 다음과 같다. 첫째, T형 교차로의 지체도 모형은 주도로 교통량과 부도로 교통량을 독립변수로 하는 지수함수 형태를 갖는다. 둘째, T형 교차로의 신호등 설치기준은 T형으로 인한 현시의 감소로 MUTCD에서 제시하고 있는 신호등 설치기준과 비교시 타당성 교통량이 높게 나타났다. 셋째, T형 교차로의 신호등 설치를 위한 첨두시 교통량기준 도표를 작성하였으며, 평일의 하루중 주도로(양방향)의 시간당 교통량과 이에 사용하는 부도로의 시간당 교통량의 최대값을 도표에 표시했을 때 접근로 차로수의 조합에 해당하는 기준선의 상위영역에 위치하면 신호등을 설치하는 것이 교차로의 지체도를 최소화시킬수 있다.

• Journal of Korean Society of Transportation
• /
• v.31 no.5
• /
• pp.60-70
• /
• 2013

This study aims to develop a truck priority on left-turn algorithm that can reduce greenhouse gas emissions by reducing heavy duty truck's stops at signalized intersection. The signal priority is granted for a left-turn phase, because heavy duty trucks can deteriorate left-turn traffic flow due to the low acceleration or deceleration rate and large turn radius. Truck priority allows to provide the stable speed control for heavy duty truck, and reduces emissions at the signal intersection. Also, two signal recovery strategies are compared for various traffic conditions. This study analyzes the effectiveness of truck priority such as greenhouse gas emissions and fuel consumption reduction, and total travel time saving using the PARAMICS and Comprehensive Modal Emissions Model (CMEM). The results show that signal priority for heavy duty trucks has an effect on reducing greenhouse gas emissions and fuel consumptions at non-peak hour. Also, it shows decreasing total travel time due to reducing truck stops.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.13-22
• /
• 2003

It is recognized that one of the problems for the current 'Traffic Adaptive Control System in Seoul' is the performance at the oversaturated condition. Instead of 'Degree of Saturation' adopted in the current system, the methodology of balancing the queue length was developed and evaluated in this study. This method keeps the balance of queue lengths on the intersections and reduces the overall queue lengths. In addition a traffic signal control model was developed based on the method. This model can reduce not only the queue lengths but also the average delay of vehicles according to the macroscopic and microscopic evaluations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.27-41
• /
• 2011

This research proposes new tram signal coordination model, called MAXBAND MILP-Tram for a passive tram signal priority strategy. The proposed model was formulated based on the MAXBAND model that was a traditional arterial signal optimization model. The model could calculate the bandwidth solutions for both general-purpose-lane traffic and median-tram-lane traffic. Lower progression speed are applied for the tram traffic considering lower running speed and dwell time at the stations. A phase sequence procedure determines the green times and left-turn phase sequences for tram traffic in median tram lane. To estimate the performance of the MILP-Tram model, the control delay of trams were estimated using the micro simulation model, VISSIM. The analysis results showed 57 percent decrease of the tram compared to the conventional signal timing model. The delay for car, however, increased 18 percent. The sensitivity analysis indicated that the passive tram signal priority strategy using the offset and phase sequence optimization was effective in reducing the person delay under the congested traffic condition.