• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.5
• /
• pp.80-85
• /
• 1997

Preventive diagnosis technique of power transforms is very important for highly reliable operation of power systems, and especially that of online transformer is needed in view of economy. Acoustic methods for partial discharge points have been studied abroad since 1960's in earnest. Electric-ultrasonic locating method by which partial discharges are found through detecting the electric and ultrasonic signal generated in partial discharge and ultrasonic-ultrasonic locating method by which partial discharges are found through detecting two ultrasonic signal with two ultrasonic sensor have been researched in our country. By using this ultrasonic-ultrasonic locating method, it was proposed of graphical determination technique of partial discharge points one dimension, two dimension, three dimension. But in locating partial discharges, they have assumed that the number of signal origin is one. So in this study we suggests a method of locating and knowing the number of signal origins when there are several origins by using ultrasonic-ultrasonic method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.585-589
• /
• 2009

In this paper, passive direction-finding localization of the emitter using noisy line-of-bearing (LOB) measurements is considered. The performance of the LOB-based emitter localization using linear LSE algorithm is given. The Dependence of the performance on bias of emitter location and sensor trajectory is illustrated using the numerical results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.161-164
• /
• 1995

실시간 ANC 이전에, 소음원으로부터 대상계를 거친 신호와 소음원신호가 오차계를 거친 신호를 측정함으로서 이론적인 한계성능을 파악하기 위한 지표를 제시하였다. 이 지표는 오차계를 통과한 신호를 입력으로, 대상계를 통과한 신호를 출력으로 하는 계의 선형화 정도를 나타내는 다중기여도함수와 흡사한 형태로 나타났다. 제한된 상황에서 ANC 성능을 최대화 하고자 할 때 이 지표는 레퍼런스와 부가음원의 위치 및 갯수 결정등 여러가지 파라메터 결정에 매우 유용하게 쓰일 수 있다고 생각된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.11
• /
• pp.884-890
• /
• 2018

In this paper, an improved method of estimating static source location is proposed based on the direct position determination(DPD) method, which estimates a source position directly using received signals. When the source position is estimated using the conventional DPD method, the estimation accuracy and error depend on a pair of receivers: a reference receiver and one of the multiple moving receivers. Based on this, the weighting values of the estimating source location were obtained using the covariance matrix for the pair of receivers($S_1$, $S_{2i}$) and applied to the DPD algorithm. Finally, the source position was estimated using the proposed DPD algorithm, and it was verified that the estimation accuracy improved, compared to the conventional DPD algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.433-439
• /
• 2007

This paper derives an approximate expression for the output SINR(Signal to Interference plus Noise Ratio) of Applebaum type adaptive array under the scenario of the interferer's proximity to the desired signal. The approximation is made in terms of array geometry, the arrival direction of desired signal and that of an interfering signal. An interferer in the close proximity of target signal is shown to drastically impair the away performance. An approximate expression for interferer arrival direction which results in a predetermined performance loss is also obtained in terms of array configurations. Proposed approximation agrees with the computer calculated performance impairment when the two signals are apart by less than eight degrees. The allowable proximity of the interfering signal increases with the number of array elements.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.47-55
• /
• 2012

A structural health monitoring technique for locating impact position in a plate structure is presented in this paper. The method employs a single sensor and spatial focusing of time reversal (TR) acoustics. We first examine the TR focusing effect at the impact position and its surroundings through simulation and experiment. The imaging results of impact points show that the impact source location can be accurately estimated in any position of the plate. Compared to existing techniques for locating impact or acoustic emission source, the proposed method has the benefits of using a single sensor and not requiring material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in other ultrasonic testings of plate-like structures.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.4
• /
• pp.437-445
• /
• 2009

In this paper, we present the performance of the LOB(line of bearing) - based emitter localization algorithm. The linear LSE(least-squared error) algorithm, nonlinear LSE algorithm and Stansfield algorithm are considered. In addition, we focus on the performance improvement of the weighted estimation compared with the unweighted estimation. Each estimation algorithm is briefly introduced, and the performance of the algorithm is illustrated using the numerical results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.36-40
• /
• 2010

In this paper, the well-known LOB-based emitter localization using linear LSE algorithm is numerically implemented and the heuristic guidelines for the parameter values to achieve 1% RMS error are presented. In the simulation, we changed the total observation durations for LOB measurements, time interval between successive LOB measurements and sensor trajectories. The effects of the time interval of LOB measurements, the time duration of the LOB measurements and the angle of flight path arc on the performance are illustrated. The dependence of the performance on the various parameters is investigated and rule-of-thumbs for the parameter values corresponding to 1% RMS error are presented for each simulation condition.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.243-243
• /
• 2004

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1789-1790
• /
• 2008

본 연구는 오류를 최소화한 초음파 수신량에 따라 구동부의 이동위치를 결정하고 이에 따른 각각의 제어신호를 출력하여 원단, 제지 등의 끝단을 정밀하게 제어함으로써 헌팅현상 등을 방지하여 물체가 더 정확한 위치에서 감기도록 유도하는 장치에 관한 것이다.