• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.37-44
• /
• 2003

A distortion suppression technology for employing multiple inputs in 3n＋1 type current mode Max circuit is proposed using the adjustment of transconductance. If the number of input blocks of the current mode Max circuit increases, the high frequency distortion in the output signal grows. In this paper, it has been disclosed that the distortion in the multiple input Max circuit is proportional to such accumulated parasitic capacitance, to the derivative of the output signal and also to tile inverse of transconductance of the common diode-connected transistor. The proposed idea is by employing as larger transconductance of the common diode-connected transistor as possible. The effectiveness of the proposed idea has been proved through the HSPICE simulation for the current mode Max circuits with various numbers of input signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12B
• /
• pp.2069-2084
• /
• 2000

최근 들어 무선 ATM, 무선 LAN 및 디지털 지상 방송 시스템 등을 위한 고속 전송 방식으로 큰 관심을 받고 있는 OFDM (orthogonal frequency division multiplexing) 방식은 다중 직교 부반송파를 이용하여 신호를 전송함으로써 전송 신호 진폭의 변화가 매우 심하여 고출력 증폭기의 비선형 특성으로 인한 심각한 왜곡이 발생된다. 본 논문에서는 이러한 비선형 왜곡의 보상을 위한 기저대역 사전왜곡기 (baseband predistorter)를 실제 구현할 때 계산 복잡도를 크게 감소할 수 있는 효율적인 구조를 제안하였다. 또한, 이러한 구조에 기반하여 수십 Mbps급 고속 무선 ATM 등에 사용 가능한 사전왜곡기를 VHDL을 이용하여 설계하고 ASIC화를 위하여 Synopsys tool을 통해 합성하였으며 실제 Altera FPGA에 구현하여 이의 성능을 검증하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1102-1109
• /
• 2001

This paper presents the new architecture of an adaptive predistortion linearizer using the polynomial type predistorter. In the proposed linearizer, most of the processes, including the predistortion, are performed with a digital signal processor(DSP). The recursive least squares(RLS) algorithm is employed for the optimization process to minimize the errors between the predistorter and postdistorter output signals. Simulation results demonstrate that the adjacent channel power ratio(ACPR) is improved by greater than 40 dB at the band edge with linearization. The convergence and reconvergence performance of the linearizer is also satisfactory.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1428-1436
• /
• 2000

An adaptive predistorter linearizer suitable for the DSP implementation is proposed. Predistortion is performed by the DSP instead of the analog predistorter. RLS algorithm is employed for the optimization process to minimize the errors between the predistorter and postdistorter output signals. Computer simulation results for our linearizer show good performance.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.296-299
• /
• 2008

최근 통신시스템과 핸드폰, PDA등의 통신기기들의 발전에 따라 사용자들은 높은 데이터 전송률과 고속의 통신서비스를 요구하고 있다. 이러한 상황에서 유 무선 통합 시스템인 Radio-over-Fiber(RoF) 시스템은 그 대안으로 대두되고 있다. 본 논문에서는 광전자소자를 선 왜곡 방식에 적용하여 광 송신기의 선형성을 향상시키는 방법을 제안하였다. 선 왜곡 방식은 두 개의 루프로 구성되어 있으며, 광 부품인 레이저 다이오드와 포토 다이오드 그리고 RF 부품인 위상변위기, 감쇄기, RF 결합/분배기, RF 증폭기를 사용하였다. 메인 루프에서 주 레이저 다이오드의 비선형성에 의해 발생된 왜곡신호성분은 보조 루프에서 부 레이저 다이오드를 이용하여 추출된 선 왜곡신호에 의해서 제거된다. 제안된 선형화 기법을 적용하여 2.4 GHz에서 선형화 기법을 적용하기 전보다 3차 상호변조 왜곡성분이 약 30dB 향상된 결과를 얻었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.669-678
• /
• 1994

This paper presents a new data predistortion technique with memory to compensate for the nonlinearities of high-power amplifiers (HPA`s) in digital radio systems employing QAM signal formats. In contrast with the conventional data predistortion technique which is designed to reduce nonlinearity of memoryless HPA`s, the proposed technique in this paper compensates not only for nonlinear warping of the signal constellation but also for clustering of the signal points caused by transmitter pulse sharping filter with memory. A practical implementation method which can reduce the size of memory at the predistortion stage is described by utilizing symmetry of QAM constellation format and Modulo-4 operation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.458-464
• /
• 2016

This paper proposes the compensation method which decreases the radiation pattern distortion caused by the mutual coupling in an array antenna. If the element distance of an array antenna decreases, the radiation pattern could be distorted by the strong mutual coupling, which changes the magnitude and phase of input signals and causes an unwanted radiation pattern. To remove the pattern distortion, compensated input signals are inserted in an array antenna. The magnitude and phase of input signals are determined by Particle Swarm Optimization (PSO) algorithm. A $4{\times}1$ dipole array antenna with omnidirectional elements is used to confirm the validity of the algorithm, where each element is placed in 0.2 wavelength to evoke the strong coupling. After input signals are optimized by PSO, it is found that the compensated radiation results in the same as the ideal case.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.307-314
• /
• 2011

A new predistortion technique for dynamic spectrum allocation systems such as cognitive radio (CR) is proposed. The system model considered in this paper occupies a small band at a time, but the center frequency can be changed in the wide range of frequency. In this scenario. the front-end filter may not eliminate the harmonics of the power amplifier (PA) output. The proposed PD reduces the spectral regrowth of the fundamental signal at the carrier frequency (${\omega}_0$) and removes the harmonics ($2{\omega}_0$, $3{\omega}_0$, ...) at the same time. The proposed PD structure is composed of multiple predistorters (PDs) centered at integer multiples of ${\omega}_0$. The PD at ${\omega}_0$ is for removing spectral regrowth of the fundamental signal, and the others are for harmonic reduction. In the proposed PD structure, parameters of PDs are found jointly. Simulation results show that the spectral regrowth can be reduced by 20dB, and the 2nd and 3rd harmonics can be reduced down to -70dB from the power of the fundamental signal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1339-1349
• /
• 2008

In this paper, a nonlinear relationship between an input complex envelope and an output complex envelope of m-th harmonic zone is theoretically analyzed, and AM/$AM_m$ and AM/$PM_m$ are defined. A scheme to extract these characteristics from measured in-phase and quadrature-phase data is suggested. The proposed analysis is verified with a fundamental-fundamental and fundamental-third harmonic measurements for a InGaP power amplifier(PA). Based on the harmonic-band nonlinear analysis and extraction scheme, a new technique to send a signal in m-th harmonic band with a harmonic signal Linearization Digital Predistortion(DPD) scheme is presented. A numerical analysis and a Look-Up Table(LUT) based DPD algorithms to linearize output signal on m-th harmonic zone are developed. For a 16- and a 64-QAM input signals, a DPD for third harmonic signal linearization is implemented, and output spectrum and signal constellation are measured. The wholly distorted signals are linearized, and thus the measured Error Vector Magnitudes (EVM) are 6.4 % and 6.5 % respectively. The results show that a proposed scheme linearizes a nonlinearly distorted harmonic band signals. The proposed nonlinear analysis and predistortion scheme can be applied to multiband transmitter in next generation software defined radio(SDR)/cognitive radio(CR) wireless system.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.502-504
• /
• 2002

군중잡음(crowd noise)이 발생하는 환경에서 음성 통화 및 화자 인식을 할 때에는 음성에 파열음이나 마찰음과 같은 유색잡음(colored noise)이 부가되어 원래 음성이 왜곡된다. 이와 같이 왜곡된 음성 신호를 처리할 때에는 군중잡음을 제거하는 과정이 반드시 필요하다. 본 논문에서는 군중잡음의 특성을 분석하고, 그 결과를 이용하여 음성 신호처리 시에 효과적으로 군중잡음만을 제거할 수 있는 모델을 제안한다. 제안된 모델은 시간 영역에서는 침묵 구간을 검출하여 마찰음과 파열음을 제거하는 과정과 주파수 영역에서는 잡음 평균을 생성하고 이를 이용한 스펙트럼 차감법(spectral subtraction)으로 군중 잡음을 제거하는 과정으로 이루어진다.