• Journal of Technology Innovation
• /
• v.21 no.2
• /
• pp.25-56
• /
• 2013

As science and technology are emphasized as national competitiveness, major nations designate new growth engine industry and establish the effective investment and the development strategy to enhance industrial development and competitiveness through science and technology. New industrial sectors such as Biotechnology and renewable energy have been spot lighted as major new growth engines and this competitive situation is getting fiercer. Universities and research institutions in each country selected and announced the future promising technological field which will produce ripple effect in the future on a regular basis. In Korea, various research institutions continue to select and announce the promising technological fields. In this study, we would like to study the method to derive the promising technological field in the field of biotechnology spotlighted as a new growth engine by utilizing patent information. We would like to derive the major technological field by collecting domestic and international patents in the field of biotechnology using IPC code based technological classification and identifying bio technological trends utilizing text mining method for analysis of technological development trends with patents. Patent contour of US and Korea is compared and analyzed through analysis of text mining to derive the general technological development field in the field of biotechnology. After that, we would like to investigate research theme of promising biotechnology focused technological development through details on technological trends through in-depth analysis about technological field which draws interest more and more in Korea and other countries.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.854-862
• /
• 2016

As the demand for a clean energy to replace fossil fuel being depleted increases, hydrogen energy is considered as a promising candidate for future energy source. Water electrolysis which produces hydrogen has high energy efficiency and stability but still has a large overpotential for oxygen evolution reaction (OER). In this study, $Co_3O_4$ catalysts with different morphology were prepared by spray pyrolysis from solutions which contain Co precursor and various organic additives (urea, sucrose, and citric acid), followed by post heat treatment. For the catalysts synthesized, X-ray diffraction (XRD) measurements were performed to identify their crystal structure. Morphology and surface shape of the catalysts were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Surface area and pore volume were examined by nitrogen adsortpion & desorption tests and X-ray photoelectron spectroscopy (XPS) was conducted to confirm nitrogen doping. Linear sweep voltammetry (LSV) was carried out to investigate OER activity of $Co_3O_4$ catalysts. As a result, bare-$Co_3O_4$ which has high surface area and small particle size determined by spray pyrolysis showed high activity toward OER.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.345-357
• /
• 2011

Recently, as part of diversifying energy sources and earth environmental issues, technology development of new renewable energy using wave energy is actively promoted and commercialized around Europe and Japan etc. In particular, OWC(Oscillating Water Column) wave power generation system using air flow induced by vertical movement of the water surface by waves in an air-chamber within caisson is known as the most efficient wave energy absorption device and therefore, is one of the wave power generation apparatus the closest to commercialization. This study examines air flow velocity, which operates turbine(Wells turbine) directly in oscillating water column type wave power generation structure from two-and three-dimensional numerical experiments and discusses optimal shape of oscillating water column type wave power generation structure by estimating the maximum flow rate of air according to change in shape. The three-dimensional numerical wave flume was applied in interpretation for this study which is the model for the immiscible two-phase flow based on the Navier-Stokes Equation. From this, it turned out that size of optimal shape appears differently according to the incident wave period and air flow is maximized at the period where minimum reflection ratio occurs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.672-682
• /
• 2020

The Korea Nowadays, which is research on digital twin technology for efficient operation in various industrial/manufacturing sites, is being actively conducted, and gradual depletion of fossil fuels and environmental pollution issues require new renewable/eco-friendly power generation methods, such as wave power plants. In wave power generation, however, which generates electricity from the energy of waves, it is very important to understand and predict the amount of power generation and operational efficiency factors, such as breakdown, because these are closely related by wave energy with high variability. Therefore, it is necessary to derive a meaningful correlation between highly volatile data, such as wave height data and sensor data in an oscillating water column (OWC) chamber. Secondly, the methodological study, which can predict the desired information, should be conducted by learning the prediction situation with the extracted data based on the derived correlation. This study designed a workflow-based training model using a machine learning framework to predict the pressure of the OWC. In addition, the validity of the pressure prediction analysis was verified through a verification and evaluation dataset using an IoT sensor data to enable smart operation and maintenance with the digital twin of the wave generation system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.187-192
• /
• 2019

Hybrid power storage system with emergency power function for demand management and power outage minimizes the investment cost in the building of buildings and factories requiring emergency power generation facilities, We propose a new business model by developing technology that can secure economical efficiency by reducing power cost at all times. Normally, system power is supplied to load through STS (Static Transfer Switch), and PCS is connected to system in parallel to perform demand management. In order to efficiently operate the electric power through demand forecasting, the EMS issues a charge / discharge command to the ESS as a PMS (Power Management System), and the PMS transmits the command to the PCS controller to operate the system. During the power outage, the STS is rapidly disengaged from the system, and the PCS becomes an independent power supply and can supply constant voltage / constant frequency power to the load side. Therefore, it is possible to secure reliability through verification of actual system linkage and independent operation performance of hybrid ESS, By enabling low-carbon green growth technology to operate in conjunction with an efficient grid, it is possible to improve irregular power quality and contribute to peak load by generating renewable energy through ESS linkage. In addition, the ESS is replacing the frequency follow-up reserve, which is currently under the charge of coal-fired power generation, and thus it is anticipated that the operation cost of the LNG generator with high fuel cost can be reduced.

• Journal of Environmental Impact Assessment
• /
• v.20 no.6
• /
• pp.937-952
• /
• 2011

정부는 지구온난화로 인해 기후변화에 대응하고 세계적 경제위기를 극복하기 위해, 저탄소녹색성장기본법(2010년 1월)을 제정하여 저탄소 녹색성장을 추진하고 있다. 저탄소 녹색성장은 신재생에너지, 탄소배출권 거래제도, 5+2 광역권개발정책, 저탄소 녹색도시 등으로 요약할 수 있다. 본 연구의 목적은 저탄소 녹색도시계획 및 이에 대한 전략환경평가의 동향을 고찰하고, 저탄소 녹색도시계획에 대한 전략환경평가의 방향을 제시하는 데 있다. 저탄소 녹색도시 조성 관련 연구를 고찰한 후, 환경부의 사전환경성검토 업무매뉴얼의 도시계획의 환경성제고 방안과 국토해양부의 전략환경평가 업무처리규정, 도시계획수립지침, 저탄소 녹색도시 조성을 위한 도시계획수립지침(2009), 저탄소 녹색도시계획 표준모델(2010), 녹색도시개발계획 등을 포함하면서 개정된 도시개발업무지침(2011)이 도시계획에 제대로 반영되는지를 검토하고, 외국의 기후변화에 대응하는 전략환경평가를 고찰한 결과는 다음과 같다. 첫째, 기후변화 대응 도시계획의 내용은 저감방안과 적응방안 두 가지로 나눌 수 있는 데, 저감방안은 경제적 및 기술적으로 한계가 있으므로, 향후 전략환경평가는 저감방안과 함께 적응방안을 강조할 필요가 있다. 둘째, 기후변화 대응(저감과 적응)을 위해 전략환경평가의 목표와 지표를 설정한다. 셋째, 국토해양부의 상위계획(광역도시계획과 도시기본계획)에 대한 전략환경평가와 환경부의 하위계획(도시관리계획)에 대한 전략환경평가의 긴밀한 연계가 필수적이다. 넷째, 전략환경평가는 도시기본계획 수립 후에 이뤄지는 독립된 과정이라기보다는 도시기본계획 수립과정에서 중요한 부분으로 인식하는 것이 중요하다. 장기적으로는 도시기본계획과 도시환경계획을 연계시키는 것이 바람직하다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1808-1818
• /
• 2015

Recently, the wind power has experienced great attentions and growths among many renewable energy sources. To increase the power generation performance and economic feasibility, the size of wind turbine (WT) is getting bigger and most of wind power plants are being constructed on offshore. Therefore, the maintenance cost is relatively high because boats or helicopters are needed operators to reach the WT. In order to combat this kind of problem, remote monitoring and control system for the WT is needed. In this paper, the small-scale WT monitoring and control system is implemented using wireless sensor network technologies. To do this, sensor devices are installed to measure and send the WT status and control device is installed to receive control message for specific operation. The WT is managed by control center through graphic user interface (GUI) based monitoring and control software. Also, smart device based web-program is implemented to make the remote monitoring of the WT possible even though operators are not in control room.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.9
• /
• pp.624-628
• /
• 2014

Reverse electrodialysis (RED) is a technique to produce electricity from two feed water that has different salinity. Recently, RED has been considered the attractive technology because this new process has large global potential and possibility to generate energy from abundant but largely unused resources. To make RED an economically attractive technology, the optimization of operation condition should be developed. In this study, we investigate the relation of internal resistance to power density of RED. And the effect of sea water and fresh water flow rate on power density was confirmed. To minimize the internal resistance and to increase power density of RED, the ratio of sea water and fresh water flow rate was optimized. Experimental result show the best performance with $1.30W/m^2$ of power density at 1.7 flow ratio of seawater/freshwater.

• Journal of the Korean Geographical Society
• /
• v.49 no.6
• /
• pp.865-883
• /
• 2014

This study investigated the carbon offset project activities as the activities of producing commodities by a case study on the Korean Clean Development Mechanism(CDM) industry. This study draw the networks of Korean CDM industry by extracting major agents and surrounding agents and by analyzing the characteristics of the linkages. The project participants owning the CDM projects hires CDM consultancies and designated operational entities(DOEs). The technical knowledge for carbon emission reduction made links between project participants and the CDM project operational knowledge made links between project participants and CDM consultancies. Links between project participants and DOEs are affected by social and geographical proximities. The value of the knowledge for CDM industrial activities determined the role of agents and type of linkages. The agents with the irreplaceable knowledge could be a project conducting firms. The agents without it became outsourcing contractors.

• Smart Media Journal
• /
• v.1 no.2
• /
• pp.47-53
• /
• 2012

Wind energy is currently the fastest growing source of renewable energy used for electrical generation around world. Wind farms are adding a significant amount of electrical generation capacity. The increase in the number of wind farms has led to the need for more effective operation and maintenance procedures. Condition Monitoring System(CMS) can be used to aid plant owners in achieving these goals. In this work, systematic design procedure for artificial neural network based normal behavior model which can be applied for fault detection of various devices is proposed. Furthermore, to verify the design method SCADA(Supervisor Control and Data Acquisition) data from 850kW wind turbine system installed in Beaung port were utilized.