• Journal of Adhesion and Interface
• /
• v.8 no.4
• /
• pp.8-13
• /
• 2007

In this study, solvent-free waterborne polyurethanes (SWPU) were synthesized with teramethylxylene diisocyanate (TMXDI), poly(tetramethylene glycol) (PTMG) and polycarprolactone (PCL) and different mole ratio of dimethylol proponicacid (DMPA). The effect of ionic contents in the solvent-free waterborn polyurethane on thermal, mechanical properties and adhesion strength were studied. Glass transition temperature (Tg) were in range of $-70{\sim}-50^{\circ}C$ and increased as PCL contents increased in polyol. With more incorporation of PCL and DMPA contents in SWPU, tensile strength, adhesion strength and heat resistance of SWPU increased, while the elongation decreased.

• Elastomers and Composites
• /
• v.38 no.1
• /
• pp.65-71
• /
• 2003

Influence of low molecular weight styrene-butadiene rubber (liquid SBR) on properties of a silica-filled styrene-butadiene rubber (SBR) compounds was studied. Viscosity of the silica-filled SBR compound decreased by adding the liquid SBR. The crosslink density decreased and the cure rate became slower as the liquid SBR content increased. The modulus and tensile strength decreased while the elongation at break became longer by increasing the liquid SBR content. The abrasion losses were nearly the same irrespective of the liquid SBR content. This might be due to the improvement of silica dispersion by adding the liquid SBR. Considering the experimental results, it was believed that addition of small amount of the liquid SBR (less than 5 phr) was desirable to improve properties of silica-filled SBR compounds.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.24-29
• /
• 2021

In this study, the electrical and mechanical properties of carbon polymer composites, which have been gradually increasing in use in various fields, were investigated, and environment-friendly carbon nanofiber/waterborne polyurethane composites were prepared. Carbon nanofibers (diameter = approximately 100-300 mm) were synthesized using a relatively simple CVD process, obtaining a carbon material for application in ultrathin planar heating films and EMP shielding films in the future. The carbon nanofiber was dispersed, and mixed with water-dispersible polyurethane using a dispersing aid. According to the carbon nanofiber mass ratio, 20%-60% polyurethane/carbon nanofiber composites were manufactured. At a concentration of approximately 20%, the percolation threshold was determined, and at a concentration of approximately 50%, an electrical conductivity greater than 0.1 S/cm was determined. Moreover, a sample having a concentration of up to 60% was evaluated to further understand the mechanical properties. It was observed that as the concentration of the carbon nanofibers increased, the elongation decreased.

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.178-182
• /
• 2008

Cellulose diacetate (CDA) and calcium carbonate ($CaCO_3$) biodegradable composites were prepared by melt mixing in a twin screw extruder and their physical properties were examined. In the melt processing, triacetine and epoxidized soybean oil were added to the composites as a plasticizer and lubricant, respectively. The optimal conditions for the preparation of the biodegradable composites were determined. Acetic acids ($CH_3COOH$) were made by pyrolysis acetyl group ($-OC (O)CH_3$) of CDA and TA in melt processing. Increasing the amount of $CaCO_3$ in the composites resulted in further enhancement of the $CH_3COOH$ absorption effects. The tensile strength and elongation were decreased, and Young's modulus and $T_g$ value increased with increasing amount of $CaCO_3$.

• Clean Technology
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2006

In this study, photo-cuarable urethane methacrylate oligomers were synthesized from polyether type polyol (PP series, GP series), isocyanate (2,4-toluene diisocyanate) and hydroxy acrylate (hydroxypropyl methacrylate). We measured basic property including color, viscosity and refractive index of resulting urethane methacrylate. Also we measured tensile strength, elongation, and Young's modulus after photo curing. Photo curing speed was investigated using photo-DSC (TA instrument). In the case of similar polyol structure, as the molecular weight of polyol is increased, tensile strength, Young's modulus, curing rate were decreased, but elongation was increased. As the number of functionality of urethane methacrylate oligomer is increased, tensile strength, Young's modulus, curing rate were increased, but elongation was decreased.

• Journal of Adhesion and Interface
• /
• v.6 no.1
• /
• pp.11-18
• /
• 2005

The capsules were prepared from a phase change material (PCM) of octadecane as a core material and melamine formaldehyde resin as a shell material. The PCM capsule size was varied in the range of $3{\sim}25{\mu}m$. The core contents and sizes of the PCM capsule, were determined by DSC and SEM, respectively. An acrylic coating material which contains butyl acrylate (BA), methyl metacrylate (MMA) and acrylic acid (AA) were synthesized by emulsion polymerization. The films were prepared from the acrylic emulsion and PCM capsules which have various capsule sizes. From the results of SEM experiment, it was observed that the PCM capsules were well dispersed inside the film and the surface of the film became less rough when the PCM capsule size was small. The swelling ratio of the films were not significantly affected by the PCM capsule size. However, the tensile strength and elongation of the films were greatly decreased with increasing the PCM capsule size.

• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.51-55
• /
• 2015

Four varieties of the Korean sweet potato, Yeonmi, Jeungmi, Shincheonmi, and Shinyeulmi, were chosen to prepare the distilled koguma-soju (sweet potato-soju). The relationship between the flavor of the koguma-soju and the content of monoterpene alcohols (MTAs) was studied. The MTAs investigated here were linalool, nerol, geraniol, citronellol, and ${\alpha}$-terpineol. The ranges of MTA concentrations in the koguma-soju made from the four sweet potato varieties were $14.0-16.6{\mu}g/L$ for nerol, $24.8-34.7{\mu}g/L$ for linalool, $32.8-38.5{\mu}g/L$ for geraniol, $37.8-54.2{\mu}g/L$ for citronellol, and $76.6-94.7{\mu}g/L$ for ${\alpha}$-terpineol. Geraniol, nerol, and linalool were found in lower concentrations, while ${\alpha}$-terpineol was present in a higher concentration compared to their average content in the imo-shochu, a distilled Japanese sweet potato-soju. The concentrations of citronellol in the koguma-soju and imo-shochu were similar. The flavor evaluation tests revealed that the koguma-soju produced from the Yeonmi variety had a leafy vegetable or a grass-like, sharp flavor, whereas the Jeungmi-soju was characterized by a fruity or a sulfur-like sharp taste. Floral, vanilla-like, and mild flavors were predominant in the Shincheonmi-soju, while the Shinyeulmi-soju had either a fruity, citrus-like flavor or a rubber-like, rough taste. This study demonstrates that koguma-soju made from different sweet potato varieties have unique characteristic flavors.

• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.241-252
• /
• 2008

ZnAl-LDH(layered double hydroxide) modified with oleic acid(SO-ZnAl LDH) was synthesized and added to the flame retardant ABS compounds containing brominated epoxy resin(BER) and antimony trioxide(${Sb_2}{O_3}$). Flame retardant ABS compounds were manufactured by using a twin-screw co-rotating extruder and subsequently injection molded into several specimen for flame retardancy and mechanical properties. The XRD patterns of ABS nanocomposites showed no peaks. The thermal stability of ABS nanocomposites was enhanced by the addition of SO-ZnAl LDH as shown in TGA results. However, these nanocomposites showed no rating in the UL 94 vertical test at 1.6 mm thickness. Only ABS nanocomposites with additional BER more than 1.5 wt% showed UL 94 V0 rating. Notched Izod impact strength, tensile modulus, and elongation at break of flame retardant ABS nanocomposites increased with the proportion of So-ZnAl LDH whereas their melt index decreased.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.58-65
• /
• 1998

Substituted dicyandiamide(Sub-DICY), Accelerated dicyandiamide(Acc-DICY), Trimellitic anhydride(TMA), Pyromellitic dianhydride(PMDA) and Phenolic curing agent(Ph.C.A.) are mainly used for epoxy powder coating curing agent. Various characteristics of epoxy films fully cured by optimum condition such as mechanical properties like $T_g$, tensile strength, elongation at break hardness, abrasion resistance and chemical properties like water absorption, acid resistance, alkali resistance and electrical properties, corrosion resistance are determined by various measuring devices and analyses devices. In conclusion, phenolic curing agent was shown excellent thoughness but severe color change as temperature increased. Acid anhydride has excellent insulation properties and color stability at elevated temperature but lower thoughness and adhesion to substrate. DICY curing agent was shown high water absorption and severe color chance as temperature increased.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.679-690
• /
• 2001

High resilience PU foams were prepared with polyether type cell opener. The influences of cell opener concentration on the kinetics, rheology, structural stability morphology and open cell content of the obtained foam were investigated and the role of cell opener during cell opening was determined. And mechanical properties as a function of cell opener concentration were studied. It was observed that urea formation reaction was delayed due to high hydrophilicity of cell opener The decrease of viscosity and the increase of tan $\delta$ were confirmed with increasing cell opener concentration so that the resulted foam had low structural stability and high open cell content. The deterioration of matrix and uniform dispersion of hydrogen-bonded urea in matrix with cell opener concentration was revealed by SEM analysis. As a result, elastic properties of the foam matrix were decreased due to high hydrophilicity of cell opener during the preparation of high resilience polyurethane foam and foam with high open cell content resulted. Hardness, tensile strength, tear strength, elongation of foam were decreased with increasing cell opener concentration.