• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.5
• /
• pp.241-247
• /
• 2004

The composites were fabricated 61 vol.%$\alpha$-$\alpha$-SiC and 39vol.% WC powders with the liquid forming additives of 12wt% $Al_2$O$_3$＋Y$_2$O$_3$ by pressureless annealing at 1700, 1800, 190$0^{\circ}C$ for 4 hours. The result of phase analysis of composites by XRD revealed $\alpha$-SiC(2H), WC, and YAG(Al$_{5}$ Y$_3$O$_{12}$ ) crystal phase. The relative density, the flexural strength, fracture toughness and Young's modulus showed respectively the highest value of 99.4%, 375.76㎫, 5.79㎫ㆍm$\frac{1}{2}$, and 106.43㎬ for composite by pressureless annealing temperature 190$0^{\circ}C$ at room temperature. The electrical resistivity showed the lowest value of 1.47${\times}$10$^{-3}$ $\Omega$$.$cm for composite by pressureless annealing temperature 190$0^{\circ}C$ at $25^{\circ}C$. The electrical resistivity of the $\alpha$-SiC-WC composites was all positive temperature cofficient resistance (PTCR) in the temperature ranges from $25^{\circ}C$ to 50$0^{\circ}C$.

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.306-314
• /
• 1990

SrO-5.7Fe$_{2}$O$_{3}$의 Magnetoplumbite형 Sr페라이트에 첨가제 SiO$_{2}$, H$_{3}$BO$_{3}$CaCO$_{3}$, SrCO$_{3}$을 0.1-0.1wt%로 변화시켜 만든 등방성과 이방성의 자기이력곡선, 밀도, 감자곡선, 고유보자력 및 미세구조특성에 미치는 영향을 조사하였다. 위 첨가제는 페라이트 생성 및 특성개선에 효과적이었도 특히 등방성에서의 입도크기를 3.5.mu.m에서 1.7.mu.m로 하였을때 소결온도가 40.deg.C 낮은 1220.deg.C에서 잔류자속밀도가 2300G, 보자력이 1950Oe, 밀도가 4.51g/Cm$^{3}$, 교유보자력이 3500Oe로 각각 증가하였다. 이방성은 등방성 보다 원등히 우수하였고 최대에너지적 (BH)$_{max}$이 소결온도가 10.deg.C 낮은 1210.deg.C에서 1.13으로 부터 3.3MGOe로 증가하였다. 이값은 이론치의 61%에 도달하고 있다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.624-626
• /
• 1993

The Electrical Charge generated by friction in flowing insulating oil can create hazadous accidents. Neutralization of static charges in the oil during transportation is an obvious method of overcoming the problem of internal electric charge. It is known that SCR(Static Charge Reducer) can neutralize much of this charge by the needle electrode and mixing it with the original charge. In our experiment, a filter to generate static charge was set just befor a measurement pipe, and streaming current from the filter to the earth $I_s$, current from the electrode to the earth $I_e$ and current from the receiving tank to the earth $I_f$ were measured in a steady state. As a result, charge density and needle electrode current increases with increasing of oil temperature. Charge elimination rate decreases with increasing of oil flow rate, and increases with increases of oil temperature. Faraday Cage current decreases with increasing of oil temperature.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1289-1290
• /
• 2007

The composites were fabricated 61Vo.% ${\beta}$-SiC and 39Vol.% $TiB_2$ powders with the liquid forming additives of 12wt% $Al_{2}O_{3}+Y_{2}O_{3}$ as a sintering aid by pressure or pressureless annealing at $1650^{\circ}C$ for 4 hours. The present study investigated the influence of annealed sintering on the microstructure and mechanical of SiC-$TiB_2$ electroconductmive ceramic composites. Reactions between SiC and transition metal $TiB_2$ were not observed in the microstructure and the phase analysis of the SiC-$TiB_2$ electroconductive ceramic composites. Phase analysis of SiC-$TiB_2$ composites by XRD revealed mostly of ${\alpha}$-SiC(6H), $TiB_2$, and In Situ YAG($Al_{5}Y_{3}O_{12}$). The relative density, the flexural strength, the Young's modulus showed the highest value of 86.69[%], 136.43[MPa], 52.82[GPa] for pressure annealed SiC-$TiB_2$ ceramic composites.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.106-108
• /
• 2002

The composites were fabricated 61vol.% $\beta-SiC$ and 39vol.% $TiB_2$ powders with the liquid forming additives of l2wt% $Al_2O_3+Y_2O_3$ by pressureless annealing at $1700^{\circ}C,\;1750^{\circ}C,\;1800^{\circ}C$ for 4 hours respectively. The result of Phase analysis of composites by XRD revealed $\alpha-SiC$(6H), $TiB_2$, and YAG($Al_5Y_3O_{12}$) crystal phase. The relative density and the Young's modulus showed the highest value of 92.9701% and 92.884Gpa for composites by pressureless annealing temperature $1700^{\circ}C$ at room temperature.

• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.61-67
• /
• 2013

The B2B e-commerce assurance system supports e-commerce purchases by Credit Guarantee Fund. This process seeks to replace a variety of current systems, including B2C, the credit card payment method on B2B, 2001 Credit Guarantee Fund and the Bank, logistics, e-MP (Market Place), and Business-to-business e-MP (business-to-business electronic payment settlement system). Over the past 10 years of its operation, the e-MP service (B2B e-commerce electronic payment systems) has contributed much to the growth of SMEs. The development of business-to-business e-commerce transactions systems and limits have provided a stable purchasing platform, improving corporate competitiveness. However. the project-based scale of credit guarantee institutions has limitations. To overcome these limitations, we propose a new model of direct or indirect government support for small business e-MP projects. This new model will support the B2B electronic commerce by allowing it to directly involve guarantee institutions directly in B2B online transactions. Therefore, this study urges government backing of the SME based B2B online business model with e-MP service.

• Electrical & Electronic Materials
• /
• v.3 no.2
• /
• pp.123-130
• /
• 1990

본 논문은 페라이트의 온도특성을 측정하기 위한 다중측정시스템의 설계에 관하여 연구한 것이다. 본 시스템은 전기로의 온도를 제어하기 위한 열전대 콘트롤러, 릴레이 동작을 제어하기 위한 릴레이 콘트롤러 및 릴레이를 구동시키기 위한 스윗칭부, 그리고 GPIB를 이용한 LCR메터 제어부와 이들을 마이크로 컴퓨터와 통신하기 버스 라인으로 구성하였다. 열전대 콘트롤러와 릴레이 콘트롤러는 8255A(Intel LSI)를 주로 이용하여 설계하였으며 릴레이로는 고주파용 릴레이를 사용하여 스윗칭 트랜지스터로 구동시키는 방법을 택하였다. 그리고 LCR-메터에는 GPIB(AD50488)보드를 사용하였다. 측정시료로서는 복합첨가제방식에 의하여 제작된 Mn-Zn-Fe계 페라이트의 시편을 사용하였으며 시료의 특성측정은 자체 제작한 자동계측시스템을 이용하여 분석하였다. 측정결과 온도보상점 T$_{o}$ 와 큐리온도 T$_{c}$ 바로 아래에서 투자율의 급격한 변화를 확인할 수 있었다. 그리고 특성의 계측에 있어서 일관성이 있고 정확한 자료를 얻을 수 있었으며 따라서 본 시스템이 인터페이스와 컴퓨터 사이의 연결성이 좋은 자동다중계측시스템으로 활용 할 수 있음을 확인한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.99-101
• /
• 1996

This paper is concerned with the fabrication of (Fe,Co)-Si-B amorphous magneto-strictive wire which attracts strong attention as a new sensor material. First, we put the ingot of (Fe$\sub$1-x/Co$\sub$x/)$\sub$77/Si$\sub$8/B$\sub$15/ composition into quartz tube. Then, under the condition of 400MHz and 8kW, we melt and mix the in-got in the high frequency induction furnance. After that, we obtain the magnetostrictive wire of 100∼150$\mu\textrm{m}$ in diameter by injection and rapid quenching within the high rotating water. Finally, we find that the wire is under the amorphous state.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.1
• /
• pp.89-97
• /
• 2000

This paper shows the study for development inprocess measuring magnetic sensor for tolerance control, First, we fabricated and annealed sample amorphous ribbons which were made of ($CO_{0.94}$$Fe_{0.06}$)$_{79}$$Si_{2}$$b_{19}$ having near zero magnetostrictive. It had 12［$\mu\textrm{m}$］ of thickness, 10［mm］ of length, and 2.5［mm］ of width. Then, we measured the magnetic characteristics such as frequency dependency over impedance variation rate and position change over impedance variation. As the results of the evaluation, we found that the sample ribbons had excellent sensor characteristics. Then, we made sensors by using the sample ribbons, As the results of the measurements, it proved that the ribbon could be used as excellent magnetic sensor for which it was possible to control inprocess measurement within the tolerance range(~$\mu\textrm{m}$ ).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.59-72
• /
• 1999

In this thesis, we measured the Barkhausen effect of CoFeSiB amorphous ribbon and then investigated its possibility to be used as a sensor material. We used a sample of composition $($Fe_{0.06}$$Co_{0.94}$)_${0.79}$$Si_{2.1}$$B_{18.9}$ with a thickness 12[pm1, width 2.5[rnml and length 5[cm], which was fabricated by a single roll method. In order to improve magnetic characteristics of the sample, we had carried on annealing in the magnetic field and in none magnetic field. And, experimented results to the magnetic characteristics show that the ribbon has large Barkhausen jump even in weak magnetic field below 0.5[0el. From the results, we confirmed that the sample can be used as an magnetic sensor material.