• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.541-544
• /
• 2008

Recently, a variety of researches has been carried out to estimate the reliability-based analysis and design method of concrete structures and is attracted by probabilistic-based durability analysis/method of concrete structures subjected to chloride containing environment using MCS (Monte Carlo Simulation). Probabilistic-based durability analysis/method was proposed by lots of researches, but there is the lack of data for degradation factors for the calculation of probability distribution. The reliability based durability analysis method represents that the service life and reliability index varies with the probability distribution and coefficient of variation of each factor. Therefore, in this paper, the importance of experiment data for the degradation factors is confirmed and the study of reliability index in RC structures under chloride attack environments is performed considering the variation coefficient of degradation factors.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.4
• /
• pp.278-289
• /
• 2009

In the present study, we evaluated the target reliability indices and partial safety factors for caisson sliding of a vertical breakwater. The average of the reliability indices of existing breakwaters was proposed as the target reliability index for the breakwater of normal safety level. The target reliability indices of high and low safety levels were also proposed based on the analysis of breakwaters in Korea and Japan. The partial safety factors were then proposed for each safety level by averaging the values calculated for 12 breakwater crosssections in Korea. The appropriateness of the proposed partial safety factors was partly verified by showing that the reliability index calculated by using the present partial safety factors is located between those of mild and steep bottom slopes of JPHA(2007). The proposed partial safety factors were inversely used to calculate the caisson width and reliability index of existing breakwaters. While the reliability indices of existing breakwaters designed by the deterministic method show a large variation, those designed by the partial safety factor method show a small variation. This indicates that the partial safety factor method allows a consistent design for given target probability of failure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.5
• /
• pp.413-419
• /
• 2008

Deterministic design optimization (DO) does not explicitly deal with a variety of factors from inherent randomness and uncertainties. Reliability based design optimization(RBDO) is necessary to use in engineering systems in order to guarantee quality and performance of product. In this paper, design variables are considered as random variables. Standard deviation according to change of design variables have changed as much as coefficient of variation. And, if the standard deviation is error of manufacturing, standard deviation-mean relation is concave form. We obtain reliability index using advanced first order second moment method(AFOSM). This paper is examined by solving two examples and the results are compares with DO, RBDO and suggested RBDO.

• Journal of Internet Computing and Services
• /
• v.15 no.6
• /
• pp.35-45
• /
• 2014

Due to the spread of unreliable online information on the social network services, the users are faced with a difficult problem for determining if the information is trustworthy or not. At present, the users should make a decision by themselves throughly for the trustworthiness of the information. Therefore, we need a way to systematically evaluate the trustworthiness of information on the social network services. In this paper, we design a trust index, called KTI (Korean Trust Index for SNS), as a criterion for measuring the trust degree of the information on the social network services. Using KTI, the users are readily able to determine whether the information is trustworthy. Consequently, we can estimate the social trust degree based on the variation of KTI. This paper derives the various factors affecting trust from the properties of the social network services, and proposes a model to evaluate the trustworthiness of information that is directly produced and distributed over the online network. Quantifying the trust degree of the information on the social network services allows the users to make efficient use of the social network.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.9-18
• /
• 2006

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, Goel-Okumoto and Yamada-Ohba-Osaki model was reviewed, proposes the exponentiated exponential distribution reliability model, which maked out efficiency substituted for gamma and Weibull model(2 parameter shape illustrated by Gupta and Kundu(2001) Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on SSE, AIC statistics and Kolmogorov distance, for the sake of efficient model, was employed. Analysis of failure using NTDS data set for the sake of proposing shape parameter of the exponentiated exponential distribution was employed. This analysis of failure data compared with the exponentiated exponential distribution model and the existing model (using arithmetic and Laplace trend tests, bias tests) is presented.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.438-438
• /
• 2023

최근 전 세계적으로 기후변화가 심해지고 있어 자연재해 또한 늘어나고 있다. 많은 자연재해 중 겨울철 재해인 대설 피해는 2012년부터 2021년까지 10년동안 약 1,200억의 피해액이 발생하였고 많은 재산 피해의 위험이 있어 지속적인 연구가 필요하다. 그 중 충남지역의 피해액은 약 200 억으로 우리나라의 피해액 중 두 번째로 많다. 따라서 본 연구에서는 PSR(Pressure Index, State Index, Response Index)과 DPSIR(Driver force Index, Pressure Index, State Index, Impact Index, Response Index) 방법을 이용하여 충남지역의 대설에 대한 취약성을 분석하여 더 신뢰할 수 있는 대설 위험지역을 제시하였다. PSR 방법은 압력지수, 상태지수, 반응지수로 구분되고, DPSIR 방법은 추진력, 압력, 상태, 영향, 대책 지수로 나뉜다. 각 지표에 해당하는 데이터베이스를 구축하고 엔트로피 방법을 이용하여 가중치를 산정하고 충남지역의 대설 취약성 지수를 산출하였다. 2018년부터 2022년까지 최근 5년 동안의 충남지역의 대설피해를 기준으로 PSR(Pressure Index, State Index, Response Index)과 DPSIR(Driver force Index, Pressure Index, State Index, Impact Index, Response Index) 방법을 이용하여 산출한 지수를 비교한 결과 DPSIR(Driver force Index, Pressure Index, State Index, Impact Index, Response Index) 방법을 이용하여 산출된 취약성 지수가 더 신뢰할 수 있는 결과를 보였다. 본 연구의 결과 대설피해 발생 시 대설 위험지수가 높은 지역을 선제적으로 대비할 수 있고 효율적인 제설대응체계를 구축할 수 있을 것으로 기대된다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.3
• /
• pp.224-229
• /
• 2009

Partial safety factors(PSFs) for Level I reliability based design of caisson type quay walls were calculated. First order reliability method(FORM) based PSFs are the functions of sensitivities of limit state function with respect to design random variables, target reliability index, characteristic values and first moment of random variables. Modified PSFs for water level and resilient water level are newly defined to keep consistency with the current design code. In the numerical example, PSFs were calculated by using a target reliability index. Seismic coefficient is defined to show extreme distribution. It was found that PSFs for seismic coefficient becomes smaller as the return period for design seismic coefficient grows longer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.19-29
• /
• 2008

As a part of study to develop LRFD (Load and Resistance Factor Design) codes for foundation structures in Korea, reliability analyses for driven steel pipe piles are performed and the target reliability indices are selected carefully. The 58 data sets of static load tests and soil property tests conducted in the whole domestic area were collected and analyzed to determine the representative bearing capacities of the piles. The static bearing capacity formula and the Meyerhof method using N values are applied to calculate the expected design bearing capacity of the piles. The resistance bias factors were evaluated for the two static design methods by comparing the representative bearing capacities with the design values. Reliability analysis was performed by two types of advanced methods: First Order Reliability Method (FORM), and Monte Carlo Simulation (MCS) method using resistance bias factor statistics. The static bearing capacity formula exhibited relatively small variation, whereas the Meyerhof method showed relatively high inherent conservatism in the resistance bias factors. Reliability indices for safety factors in the range of 3 to 5 were evaluated respectively as 1.50~2.89 and 1.61~2.72 for both of the static bearing capacity formula and the Meyerhof method. The target reliability indices are selected as 2.0 and 2.33 for group pile case and 2.5 for single pile case, based on the reliability level of the current design practice and considering redundancy of pile group, acceptable risk level, construction quality control, and significance of individual structure.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.641-648
• /
• 2022

In this study, the performance of the NHPP software reliability model with exponential distribution (Exponential Basic, Inverse Exponential, Lindley, Rayleigh) characteristics was comparatively analyzed, and based on this, the optimal reliability model was also presented. To analyze the software failure phenomenon, the failure time data collected during system operation was used, and the parameter estimation was solved by applying the maximum likelihood estimation method (MLE). Through various comparative analysis (mean square error analysis, true value predictive power analysis of average value function, strength function evaluation, and reliability evaluation applied with mission time), it was found that the Lindley model was an efficient model with the best performance. Through this study, the reliability performance of the distribution with the characteristic of the exponential form, which has no existing research case, was newly identified, and through this, basic design data that software developers could use in the initial stage can be presented.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.3
• /
• pp.306-311
• /
• 2016

Software reliability in the software development process is an important issue. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, reliability software cost model considering logarithmic and exponential fault detection rate based on observations from the process of software product testing was studied. Adding new fault probability using the Goel-Okumoto model that is widely used in the field of reliability problems presented. When correcting or modifying the software, finite failure non-homogeneous Poisson process model. For analysis of software reliability model considering the time-dependent fault detection rate, the parameters estimation using maximum likelihood estimation of inter-failure time data was made. The logarithmic and exponential fault detection model is also efficient in terms of reliability because it (the coefficient of determination is 80% or more) in the field of the conventional model can be used as an alternative could be confirmed. From this paper, the software developers have to consider life distribution by prior knowledge of the software to identify failure modes which can be able to help.