• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.41-47
• /
• 2012

There are PFD(Process Flow Diagram) and P&ID(Piping and Instrument Diagram) for designing and managing chemical process efficiently. They provide the operation condition and equipment specifications of chemical process, but they do not provide the reliability of chemical process. Therefore, in this study, Reliability Flow Diagram(RFD) which provide the cycle and time of preventive maintenance has been developed using Directed Graph Analysis methodology. Directed Graph Analysis methodology is capable of assessing the reliability of chemical process. It models chemical process into Directed Graph with nodes and arcs and assesses the reliability of normal operation of chemical process by assessing Directed Graph sequential. In this paper, the chemical process reliability transition according to operation time was assessed. And then, Reliability Flow Diagram has been developed by inserting the result into P&ID. Like PFD and P&ID, Reliability Flow Diagram provide valuable and useful information for the design and management of chemical process.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.22-35
• /
• 2013

With the increase in image detectors, concerns about the reliability of traffic information are increasing. In this paper, we propose a method to generate reliable traffic volume using analysis of the point detector data as a representative value. Therefore, targeting expressway, we analyzed the difference in traffic volume collected by loop and image detector, and verified statistically using t-test, and finally analyzed the error rate compare to the real traffic volume. Analysis revealed that there was a statistically difference the traffic date collected by the loop detector and the image detector, in the same period, the same time, respectively. In addition, the difference between the actual traffic volume and traffic that have been collected in a loop detector was the lowest Therefore, creating a traffic volume of representative value, we proposed a method to use loop detector than the average traffic volume collected by each detector. It shows that it is more important to use one high-quality data rather than various low-quality data to produce a representative value.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.212-221
• /
• 2022

In this paper, the evaluation procedure applying the limit state design method is studied to be consistent with the newly issued bridge design code in Korea. The live load factor for evaluation is proposed by calibrating for the target reliability index through reliability analysis. Using the actual bridge information collected for the representative bridge types in Korea, the load effects of the design live loads for the previous and current design codes are calculated and compared. The live load factor is calibrated through reliability analysis using the minimum required strength which equals to the load effect obtained for the example bridge. Bridge evaluation is performed by applying the live load factors for the evaluation level as well as design level. The load rating result is generally increased by applying the limit state design method compared to the previous design method and applying the proposed load factor for lowered target reliability index further increased the rating result.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.369-371
• /
• 2001

본 논문에서는 경량전철시스템 기술개발사업에서 개발하고자하는 차량시스템, 신호제어시스템, 전력공급시스템 및 선로구축불의 목표신뢰도를 정의하였다. 이 목표신뢰도의 배분은 국내지하철의 고장유형 및 철도분야에 축적되어있는 고장율을 바탕으로 작성되었다. 특히, 차량시스템분야는 보다 자세히 목표신뢰도를 배분하였다. 이러한 목표신뢰도 배분을 통하여 경량전철 시스템의 각 개발단계마다 이루어지는 개발활동(설계, 제작 및 구매)의 검증을 수행하여야 신뢰성을 확보한 경량전철시스템개발이라는 궁극적인 목적을 달성할 수 있다. 목표신뢰도 배분에 맞추어 경량전철시스템개발동안 제동장치, 추진장치, 출입문장치, 제어장치 등 고장시 열차의 운행을 정지시킬 수 있는 구성품에 대한 신뢰도를 모델링하여 신뢰도 예측 및 분석하고 이에 맞추어 설계검증 및 보안을 한다. 또한 경량전철시스템의 시험선로에서의 주행시험을 통하여 국내 경량전철시스템에 적합한 신뢰도 기준을 마련하고자 한다.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.3
• /
• pp.601-609
• /
• 2014

The most widely used data mining technique for big data analysis is to generate meaningful association rules. This method has been used to find the relationship between set of items based on the association criteria such as support, confidence, lift, etc. Among them, confidence is the most frequently used, but it has the drawback that we can not know the direction of association by it. The attributably pure confidence was developed to compensate for this drawback, but the value was changed by the position of two item sets. In this paper, we propose four symmetrically and attributably pure confidence measures to compensate the shortcomings of confidence and the attributably pure confidence. And then we prove three conditions of interestingness measure by Piatetsky-Shapiro, and comparative studies with confidence, attributably pure confidence, and four symmetrically and attributably pure confidence measures are shown by numerical examples. The results show that the symmetrically and attributably pure confidence measures are better than confidence and the attributably pure confidence. Also the measure NSAPis found to be the best among these four symmetrically and attributably pure confidence measures.

• The Magazine of the IEIE
• /
• v.18 no.2
• /
• pp.46-54
• /
• 1991

현대에 개발되는 시스팀은 고성능, 다기능이 요구되며 그 요구가 사용자 관점에서 볼 때 고신뢰성이 한층 요구 되어지고 있다. 연구 개발 단계의 초기 단계에서 설정된 품질 목표치, 즉 신뢰도(reliability), 가용도(availability), 정비도(mailtailability)를 기준으로 연구 개발 단계별로 품질 및 신뢰성 활동들이 구체화 된다. 특정 시스팀이 하나의 building block의 개념으로 구체화 되고 시스팀의 계층 구조를 물리적 구조로 분류되는 시스팀 설계 단계에서 시스팀 블록 단위의 신뢰도 배분(reliability allocation)이 이루어진다. 시스팀의 설계가 완료된 상태에서 상세 설계되어 제품이 실현되며, 시제품에 대한 신뢰도 예측(reliability prediction)업무가 착수된다. 시스팀의 품질목표치를 겨냥한 실질적인 품질 및 신뢰성 활동들이 신뢰도 배분치 및 시스팀 신뢰도 목표치로 bottom-up 방식으로 접근하게 됨에 따라, 본고에서는 시스팀의 품질 목표치를 달성하기 위해 가장 원천적으로 기본이 될 수 있는 전자부품의 품질 수준을 분석하고, 신뢰성 관련 제반 시험 기술을 분석 기술하고자 한다.

• The Korean Journal of Applied Statistics
• /
• v.24 no.3
• /
• pp.515-521
• /
• 2011

In this paper we consider failure detection equipment that which find failures in repairable systems and enable repair operations. In practical situations, failure detection equipment may come across troubles that can cause the omissions in detecting system failures and have a serious effect on system reliability. We analyze this effect through the appropriate modeling of Markov processes.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.20
• /
• pp.25-32
• /
• 1989

열화수신포에 있어서 확률론적 신뢰도설계 및 단순스트레스와 강도의 고장모형은 렌덤 수치들로 구성된 각 분포의 간섭(Interference) 확률에 의해 이루어진다. 현재까지 이러한 분포모형들의 신경도는 분석적, 수치적 또는 모의실험방법론학에 의해서 단일추정치를 계산및 해석하여 왔으나 현실적으로는 스트레스 강도함수 분포의 간섭구간에 있어서 그 렌덤 변수들에 대한 완전한 실제의 분포들을 파악하기란 너무 복잡하고 때로는 불가능하다. 이를 위해서는 신뢰도의 상·하한 결정으로 신뢰도설계를 하는 방법이 고려된다. 본 연구에서는 스트레스와 강도의 렌덤 변수들에 대한 중복부분(Overlapping tails) 내에 있어서 각각의 주어진 구간확률을 제약조건으로 하여 최적신뢰도 한계를 결정 및 설계하는 새로운 기법을 제시한다. 설계신뢰도의 최적상한 및 하한 값은 제공하기 위하여 비선형모형인 Quadratic programming optimization 기법을 이용하여 신뢰도분석관점에 입각한 특수구조모형을 설정하고 이에 대한 수치예를 들어 예증하였다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.40-44
• /
• 2000

The purpose of study was to measure the interrater reliability of the newly developed caries diagnostic instrument, Diagnodent(KaVo, Germany), using a new laser fluorescence techinique. One hundred and three extracted human premolars and molars were examined by Diagnodent, three times for fissures and five times for smooth surfaces. There was no significant difference among the three fissure means, but two combinations showed significant differences among the five smooth surface means. Correlation coefficients of Pearson and Spearman were all above 0.9(P<0.01). The $\alpha$ values from reliability analysis were 0.9980 or 0.9981 for fissures and 0.9992 for smooth surfaces.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1043-1048
• /
• 2009

PES (Programmable Electronic System) is used by software development for the train control system. PES has been widely used in real world and consists of hardware, firmware and application software. The PES are easily apply to many applications because its implementation has high flexibility. Many safety critical functions are realized through software in safety critical system. Normally, it is difficult to detect failures for PES system because the PES is too sophisticated to identify sources of the failure. So, the reliability analysis is needed by using software fault tolerance techniques. Currently, there are the recovery block, distributed recovery block, N-version programming, N self-checking programming in fault tolerance techniques. In this paper, the models of recovery block and N-version programming in software fault tolerance techniques are suggested by using the Markov model. Also, the reliability in the train control system is analyzed through changing time. The fault occupancy rates of the program, adjustment test and voter are stationary. So, the relation between time and reliability is presented by using Matlab program. In the result of reliability, the reliability of recovery block is more high than N-version programming in case of the same number of substitution block.