• Journal of Sericultural and Entomological Science
• /
• v.28 no.1
• /
• pp.66-71
• /
• 1986

The studies were carried out to screen the optimum conditions for enzymatic degumming of raw silk yarn and silk fabric by use of Alkalase, a protease produced by Bacteria, comparing with Papain and Trypsin representing natural proteolytic enzymes. 1. The optimum temperature and acidity of degumming solution were 70$^{\circ}C$, pH 5-6 for Papain degumming, 40$^{\circ}C$, pH 8 for Trypsin and 50-60$^{\circ}C$ pH 8-9 for Alkalase. 2. By increasing the Alkalase concentration in the range of 0.6 to 1.0 gram per liter, the time for enzymatic degumming of silk yarn could be reduced by 40 minutes. 3. In degumming of silk yarn by Alkalase, the pretreatment of 95$^{\circ}C$, 10 minutes at 0.1% sodium bicarbonate solution or posttreatent of 80$^{\circ}C$, 20 minutes at 2% (o.w.f.) sodium silicate solution improved the efficiency of enzymatic degumming, as compared to that of nontreatment. 4. The breaking strength, elongation and Lousiness results of enzymatically degummed silk yarn were apt to be improved more than those of soap-degummed one. 5. When the pretreatment of alkaline solution was done with over 20% of degumming ratio, the enzymatic degumming efficiency of both Havutae and Crepe de chine could be reached to the same level with those of soap-soda degummed. 6. As the pretreated silk fabric with 20% of degumming ratio was under action of three proteases, respectively, the deumming efficiency of Havutae and Crepe de chine were completed by Alkalase more than by Papain or Trpysin. 7. The stiffness of enzymatically degummed Crepe de chine was not only reduced by 17% more than that of soap-soda degummed one but also the Drape coefficient was decreased in enzymatically degummed fabrics, which was closely related with the soft touch of degummed fabrics.

• Journal of Sericultural and Entomological Science
• /
• v.33 no.2
• /
• pp.87-92
• /
• 1991

The shrinkages and physical properties of silk yarn were studied on the effect of treatment concentration, time and temperature with various neutral salts. The degummed silk yarn was shrunk about 35 percent by highly concentrated solution of Ca(NO3)2 on conditions of S.G.(special gravity) 1.45 at 9$0^{\circ}C$ or S. G. 1.46 at 8$0^{\circ}C$. About 40 percent of silk yarn was contracted in length by the treatment of CaCl2 solution on conditions of S. G. 1.33 at 9$0^{\circ}C$ for 5 mins. or at 85$^{\circ}C$ for 10 mins. By treating the concentrated solution of LiBr the silk yarn showed about 40 percent of shrinkage on a conditions of S. G. 1.38, $25^{\circ}C$ 24hrs. The physical properties of salt-treated silk yarn could be significantly changed with shrinkage variations. There were some differences in shrinkages between different type of salts. However, it was observed that generally the tenacity was decreased and breaking elongation increased as the shrinkage increased. The bulkiness of salt-treated silk yarn was increased by 110 to 120 percent compared with untreated yarn.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.650-654
• /
• 1998

Three distinct phases were observed in acidity change during the Kakdugi fermentation; the first increasing phase, a stable phase, and the second increase phase. Enterobacter strains were the dominant bacteria (more than 90%) just after preparation of Kakdugi. Lactobacillus and Leuconostoc sp. were the mainly isolated from properly-ripened (53 and 43%, respectively) as well as from over-ripened Kakdugi (63 and 37%, respectively). Leuconostoc mesenteroides subsp. paramesenteroides was the dominant one among the lactic cocci from Kakdugi. The isolates from properly-ripened Kakdugi required more amino acids for growth compared to those from over-ripened one while no difference was observed with vitamins. Their physiological characteristics such as amino acid and vitamin requirement were different from those of 9 type strains of various Leuconostoc species.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.267-275
• /
• 2009

Max-plus algebra is a nonlinear system comprised of two operations, maximization (max) and addition (Plus), which are corresponding to the addition and the multiplication in conventional algebra, respectively. This methodology is applicable to many discrete event systems containing the state transition with the maximization and addition operation. Timetable with connection is one of such systems. We present the method based on max-plus algebra, which can make up timetable considering transfer and analyse its stability and robustness. In this study, it will be shown how to make up the timetable of the urban train and analyse its stability using Max-Plus algebra.

• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.61-70
• /
• 2004

This work is about the development or asphalt sealant using the waste edible oil. Asphalt sealant has been used for crack filler and bridge deck joint sealer Several plasticizers such as aromatic or paraffin process oils, DOP, Bunker C fuel oil, and waste edible oil were compounded with the basic components such as asphalt(AP-5), a thermoplastic elastomer(SBS triblock copolymer), a tackifying agent(petroleum resin), and stabilizers. Penetration, softening point, ductility, and elongation by tensile adhesion of those asphalt sealant compounds were measured. Their properties were changed largely depending on both the type and content of plasticizers. Waste edible oil and DOP were the best plasticizers for the low temperature tensile adhesion characteristics. Penetration and elongation by tensile adhesion of asphalt sealant compounds increased with the increase of waste edible oil content and decreased with the increase of talc content. The manufacture of asphalt sealant with low penetration and excellent low temperature tensile adhesion was possible by the recipe optimization.

• Membrane Journal
• /
• v.26 no.5
• /
• pp.401-406
• /
• 2016

In this study, we have investigated the removal of the low level radioactive ions of Cs and I in water by the reverse osmosis (RO) process. The two RO modules produced in domestic region and the waste RO module after the cleaning process were selected. Then we compared removal performance of both Cs and I. The experiments are conducted by varying the concentration of feed, the pressure. As a results, it was confirmed that all three modules are higher I decontamination factor than Cs. And particularly, for the cleaned RO module, its decontamination factor of I was 1140. Since the results at low pressure condition were better than that at high pressure conditions, the use of the direct installation of RO modules on the tap water might be possible. In addition, it was confirmed that the waste RO module after cleaning process using EDTA, SBS and NaOH, increased the decontamination performance better than before cleaning, in particular, the recovery ratio after cleaning was 6.3% higher.

• Composites Research
• /
• v.31 no.6
• /
• pp.304-310
• /
• 2018

Autoclave process has been remaining as one of the most robust and stable process in fabricating structural composite part of aerospace industry. It has lots of advantages, however exhibits some disadvantages or limitations in capital investment and operation. Recently, there have been various Out-of-Autoclave process being researched and developed to overcome those limitations. In this study, laminate specimens were fabricated using LCM (Liquid Composite Molding) process, regarded as one of potential OoA process. DB (Double bagging), CAPRI (Controlled Atmospheric Pressure Resin Infusion), VAP (Vacuum Assisted Process) and Autoclave process were used for laminate specimens. Void content, Thickness, Tg (Glass Transition Temperature), ILSS (Interlaminar Shear Strength) and Flexural strength properties were evaluated for comparison. It is verified that Autoclave based specimen has uniform thickness distribution, the lowest void content and outstanding mechanical properties. And, CAPRI based specimen exhibits relatively good physical and mechanical properties over DB and VAP based specimen and comparable mechanical properties with autoclave based specimen.

• The Korean Journal of Mycology
• /
• v.41 no.2
• /
• pp.97-103
• /
• 2013

Pholiota nameko is an edible mushroom belonged to Family Strophariaceae of Agaricales, Basidiomycota. The purpose of this study was to investigate the antioxidant and anti-inflammatory activities for the methanol and hot water extracts prepared from fruiting bodies of Pholiota nameko. Besides measuring for 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging activity, a reducing power and a chelating activity on ferrous ions were also measured to evaluate the antioxidant activity for those extracts. To measure the anti-inflammatory activities for the extracts, nitric oxide(NO) production from lipopolysaccharide treated RAW 264.7 macrophage cells and carrageenan-induced acute hind paw edema of rats were investigated. The results showed that those extracts has a excellent chelating activity on the ferrous ions compared with positive controls. And it also turned out that extracts had a good DPPH activity and a reducing power. The NO production in LPS-treated RAW 264.7 macrophage cells were decreasing as we increased concentration of those mushroom extracts. Significant reduction of paw edema were also observed at 2~6 h after we treated methanol and hot-water extracts at the 50 mg/kg concentration to the rats which are induced acute hind paw edema by carrageenan treatment. The experimental results suggested that methanol and hot-water extracts of Pholiota nameko fruiting bodies might be used for potential source of antioxidant and anti-inflammatory agents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.119-137
• /
• 2020

Over the last two decades, the attitudes to cars have changed from buying a car to sharing a car, especially among young people. Shared transport services and autonomous vehicles together can resolve the accessibility issue of shared transport services. Furthermore, they will make it possible to develop a new model of apartments without car parking. Therefore, the study estimated the demand for car sharing by young people and the running efficiency of car-sharing dealing with their car-based trip demand. The study chose nine apartment complexes for study sites where a majority of the residents were young people. The questionnaire survey was conducted to collect data on the trip demands of young people. The results showed that there are significant differences in the car-sharing use patterns and demand between the apartment houses located in the Capital region and non-capital region. Young people living in apartments in the Capital region used car sharing once per day per person for approximately 80 minutes per trip and tended to hire that between 8 AM and 10 AM. On the other hand, the young people living in apartments in the non-capital region used car sharing twice per day per person for approximately 200 minutes per trip. They tended to hire that frequently in the afternoon and evening as well as in the morning. The results also showed that a single car-sharing vehicle could deal with 3~4 trips per day in the Capital region and around 2 trips per day in the non-capital region.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.191-199
• /
• 2011

A study was done to compare the properties of artificially deteriorated silk with ultraviolets for reinforcing of loss area of paintings on silk. Deteriorated surface of raw silk irradiated by long-wavelength ultraviolet(UV-A) than short-wavelength ultraviolet(UV-C) was similar to naturally aged raw silk. UV-A irradiation raw silk was slowly decreased in tensile tenacity and elongation and lowered in yellowness index than that of UV-C. Water content of UV-A irradiation raw silk than that of UV-C was higher. UV-A irradiation raw silk had no problem in dyeing and inpainting for conservation because of low yellowness index. UV-C irradiation raw silk was brittle, but UV-A irradiation raw silk was seemed to tough and similar to naturally aged raw silk. Korean painting conservator estimated that UV-A irradiation raw silk was more proper for reinforcing of loss area of paintings on silk than that of UV-C.