• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.333-333
• /
• 2010

크라이오 펌프는 크기에 비해 상대적으로 큰 배기속도를 가지고 있고 자체 기체 방출이 적어 비교적 쉽고 빠르게 도달압력을 낮출 수 있다. 또 초고진공 펌프로서 경쟁 상대인 터보분자 펌프보다 기체 돌입에 대한 기계적 사고 가능성이 낮다. 그러나 흡착 패널의 온도에 민감하게 반응하는 배기 성능 측면에서 볼 때 크라이오 펌프의 대유량 및 펄스 기체 부하에 대한 성능 유지 및 회복능력은 의문의 여지가 있다. 크라이오 펌프의 기체부하에 대한 공식적인 성능지표로는 최대배기량(max. throughput)과 교차(crossover)값이 있다. 전자는 연속적인 유량[$Pa{\cdot}m^3/s$]에 대해, 또 후자는 일정 기체량[$Pa{\cdot}m^3$]에 대해 흡착 패널이 20 K를 넘지 않는 가동범위를 구하는 것이다. 교차값은 넓은 의미에서 펄스 기체부하에 대한 성능으로 볼 수도 있지만 원래 목적은 진공용기를 저진공 상태에서 고진공 상태로 전환하는 시점을 정하려는 데 있다. 펌프회사에서 제공하는 사양에는 대부분 아르곤 회복시간(Ar recovery time)이라는 지표가 있는데 이는 아르곤을 상당한 유량으로 흘리다 멈췄을 때 얼마나 빨리 기저 상태로 회복되는가를 나타낸다. 보통 사양서에 제시하지는 않지만 주로 크라이오 펌프의 재생상태를 알아보기 위해 사용하는 걸프(gulp) 시험이 있는데 일정량의 기체를 펄스로 도입한 후 압력변화를 기록하여 재생후 배기성능 회복 능력을 보는 것이다. 이들은 겉보기에 서로 다르지만 한편으로는 서로 중복되거나 연관성을 가지고 있어서 실용적인 면에서 절차들을 비교, 검토 및 개선하고 때에 따라서는 적절히 결합할 수 있는 방안을 모색할 필요성이 있다.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.169-176
• /
• 2010

Cryopumps can provide economical profits with a relatively high pumping speed per size. However, it is somewhat doubtful that pumping performance of cryopums, which is very sensitive to the temperature of the adsorption panel, can be maintained or recovered fast for large continuous or impulsive gas loads. The official evaluation items indicating cryopump performance for gas loads are the maximum throughput and the crossover value. There are two other, unofficial but widely used, items, the Ar recovery time and gulp characteristics. Although these evaluation items look absolutely different with each other, there are close relations and even duplications in their test schemes. Therefore, it is necessary to study how to improve practically each test procedure, and combine or unify some procedures.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.8
• /
• pp.5-16
• /
• 2011

The objective of this paper is to assess the potential use of the resilient force of the ground obtained from an accelerometer and to propose a new compaction control process. Several comprehensive field experimental programs were conducted to analyze the correlation of compaction results obtained from an accelerometer and conventional test methods (e.g. the plate load test and field density test). This study focused on comparing the compaction results obtained from an accelerometer with conventional test results statistically. Based on the statistical analysis results, impact and resilient force measured from an accelerometer, mounted on the drum of a roller are very useful factors for continuous compaction control. A new compaction criteria determination process using an accelerometer is also proposed in this study.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.83-94
• /
• 2000

Applicability of PMT in domestic area, test procedure, and methods determining the shear strength parameters $(cu,\phi)$and deformation character (E) using PMT results were studied. At six test boreholes of three construction sites in Pusan, PMT using Elastometer-200 type was performed. The problems occurring during tests were investigated and the test results were analysed.In-situ total horizontal stress could be obtained by observation from pressuremeter curve and limit pressure, ｐ could be determined by $ｐ-log(\Deltav/v)$ method. Shear strength parameters$(cu,\phi)$ and deformation modulus(G, E) could be determined from the PMT results. But effective friction angle and undrained cohesion determined from PMT results were greater than those obtained from laboratory test.Using PMT results, marine soil in Pusan could be classified approximately. Net limite pressure values were in the range of 6.4~22.5 $kg/cm^2$, in clay, 2.2~30.$kg/cm^2$, in sand, 13.0~58.0$kg/cm^2$, in weathered soil and 47.0~190.0 $kg/cm^2$, in weathered rock. Also, Em/ｐ values were in the range of 2.4~7.0 in clay, 2.6~12.1 in sand, 6.8~17.1 in weathered soil and 7.2~29.6 in weathered rock.

• Journal of KIISE:Software and Applications
• /
• v.26 no.4
• /
• pp.533-545
• /
• 1999

절차적 재사용, 객체지향 사용, 디자인 패턴, 분석 패턴, 그리고 프레임 워크와 같은 효율적인 소프트웨어 재상요에 대한 많은 연구가 진행되어 오고 있다. 최근 들어 객체지향 프레임워크가 효율적이고 실용적인 재사용 기법으로 크게 부각되고 있다. 객체지향 프레임워크는 특정 도메인에 대한 여러 어플리케이션들 간의 공통된 행위들을 지닌 클래스들의 집합으로서, 재사용성을 증가시키고, 어플리케이션 개발시간을 단축시키는 효과를 지니고 있다. 그러나, 객체지향 프레임워크를 구축하기 위한 체계적인 개발 프로세스와 세부적인 개발 지침에 대한 연구가 충분히 이루어지지 않은 상태이며 OMG의 Unified Modeling Kanguage (UML)을 이용한 객체지향 프레임워크 개발에 관한 연구도 매우 미흡한 상태이다. 본 논문에서는 UML 문법과 의미를 기반으로 한 실용적인 객체지향 프레임워크 모델링 기법을 제시한다. 제시된 모델링 기법의 프로세스는 분석, 설계 구현, 그리고 시험 4단계(Phase)로 구성되어 있으며 , 각 단계는 논리적인 개발 업무(Task)들로 정의된다. 제시된 프로세스는 UML 다이어그램들을 적용 및 확장하였고, Objectory 프로세스를 바탕으로 한 것이므로 , 제시된 프로세스의 적용성 검증을 위해 전자 상거래 도메인에 대한 적용사례연구를 제시한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.789-798
• /
• 2013

The procedures and relevant programs developed for analyzing mechanical load data of wind turbine generator systems, which are obtained through type certification tests, are verified. The following issues according to IEC 61400-13 are covered in the developed programs: data validation, time series analysis, summary load statistics, generation of fatigue load spectra, and estimation of equivalent loads. A capture matrix for normal power production is generated to determine whether the collected data sets are sufficient to carry out fatigue analysis. Fatigue load spectra are obtained through the rainflow counting method using 50 load ranges; finally, equivalent loads are calculated using different S-N curve slopes, m, according to the relevant materials. Case studies are performed using aero-elastic simulation data of the NREL 5 MW baseline wind turbine with a monopile foundation.

• The Journal of the Korea Contents Association
• /
• v.7 no.9
• /
• pp.139-147
• /
• 2007

The police is huge career civil service organization. In 1999, police organization employed 7,801 persons as a new hiring. The police had revised employment system several times for competent human resources. But, it is true that much improvements need yet for person's employment which equip eligibility. Specially, discussions need for many new hirings by duty police system abrogation. Career civil service system is impossible of dismissal after permanent appointment. It is true that competitive rate of police officer examination much rose. But it's not important about organization development in addition this unconnects with competent resources. Must change police officer employment system for organization's future development. This study proposed policy about improvement way of examination for service step, field training officer and appointment.

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.262-273
• /
• 2020

A fluorine content analysis method for krill oils, which is a representative oil formulation in foods, was developed in compliance with the Korea Food and Drug Ministry's "Guidelines for Validation of Testing Methods Related to Food". Using this method for krill oils, the presence of impurities was evaluated via combustion-ion chromatography (C-IC). A review of published technical data on fluorine in krill oils showed that while the traditional wet potentiometric method was typically used, it was not reliable. Moreover, there was no food testing/analysis laboratory in Korea to perform a fluorine test analysis on such an oil matrix. Therefore, we identified halogen (fluorine) tests, developed to national and international standards, and developed a test method suitable for krill oils by selecting a C-IC method that is sufficiently applicable to the oil matrix. Based on the characteristics of the oil matrix, the optimal test method was established through various experiments by reviewing the concerns related to loss and interference in the preparation and introduction of samples. The fluorine content test was carried out on 11 krill oil products that were purchased online. Most products (with the exception of only one) were found to contain less than the reporting limit obtained by the test method. Furthermore, after additional testing, a high fluorine content of approximately 2,000 ~ 3,000 mg/kg was detected on the krill surface, although the concentration varied depending on the area of the krill. A comparison with samples from two ISO/IEC 17025 testing laboratories confirmed that there was no significant difference in the statistical analysis results obtained by ANOVA among the three laboratories. A testing guide for fluorine content analysis was completed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1705-1713
• /
• 2010

The reliable fatigue life for hybrid composite joint structures was estimated by a statistical method for evaluating fatigue life; the results of the fatigue test varied widely. Cyclic bending tests were performed on a cantilever beam with a hybrid composite joint, which was developed for the body of a low-floor bus. In order to estimate the fatigue life of the hybrid composite joint structure by comparing the data obtained during the fatigue tests, the most suitable probabilistic density function among the normal, lognormal, and Weibull distributions was selected. The probabilistic-stress-life (P-S-N) curves calculated by using the selected Weibull distribution was suggested for process of statistical fatigue life estimation and reliability design.

• Journal of the Korea Society for Simulation
• /
• v.27 no.1
• /
• pp.15-24
• /
• 2018

High Level Architecture(HLA) for modeling and simulation is an international technical standard to achieve simulation interoperability and reusability. Building federation through the interworking of federates is being used in various fields and is being used in KR(Key Resolve), UFG(Ulchi-Freedom Guardian) as a representative in domestic military. Currently, United States Department of Defense emphasizes the HLA compliance test, which confirms the compliance of Federate by using HLA. However, due to the limitations of testing tools, an HLA compliance test of DoD is not able to perform some of the functional tests on HLA/RTI services such as federation storage/recovery services and also exclude inspection of exchange data between federates. To solve these problems, this paper proposes an HLA compliance testing system of ROK suitable for domestic situations. This will enable effective HLA compliance testing and improve interoperability between federates.