• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1190-1192
• /
• 2004

풍력을 이용한 풍력발전기의 전력변환 시스템을 개발하기 위해서는 바람특성을 정확히 분석하고 이를 대치할 수 있는 모의시험 장치가 필수적이다. 모의시험 장치는 풍향, 풍속 등의 인자들을 입력받아 회전 블레이드의 토오크를 전동기가 대신해서 발전기에 공급하게 된다. 본 논문에서는 풍력발전 모의시험 장치를 이용해서 현재 개발 중인 750kW gearless형 풍력발전 시스템의 인버터 특성과 고효율의 전력변환 설계를 위해 시험용 지그에서 시험한 결과를 보이고자 한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.267-273
• /
• 2012

The short-range communication module was developed in this paper which is suitable for the point-to-multipoint circumstances of 40 terminals communicating frequently in about 50 meters. The media access control layer of this communication module using asynchronous time-division multiplexing provides a fast and robust performance even in the worst case of simultaneous transmission events, and low packet error rate was measured a in LOS (Line-of-sight) circumstance by adding the function of acknowledge response to media access control layer. The difference test was carried out in order to measure the performance of point-to-multipoint communication. Two communication modules are respectively measured and graphed in 10 branches to 40 branches. The communication module developed in this paper showed a faster performance than the commercial Zigbee module in the specific case presented in this paper. Especially, in over 20 branches showed wide differences of the transmission speed. This results is caused by more network overhead of Zigbee whose wider applications needs the network layer and applicaiton layer besides media access control layer. Also, the asynchronous time-division multiplexing proposed in this paper are more suitable than CSMA-CA of Zigbee module when a lot of module ought to be frequently communicated in small area.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.642-649
• /
• 2001

Precision parts and instruments are tested to evaluate performance in development-process and product-step to prement a potential defect due to a failure design. In this paper, Environmental test technology, which is the basis of reliability analysis, is introduced with examples of test criterion, test method for products, encoder and traffic signal controller, and measuring instruments. Recently, as the importance of the environmental test technology is recognised. It is proposed that tranining of test technician and technology of jig design and failure analysis are very essential.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.41-48
• /
• 2010

In this paper, a new type of integrated AFCI is designed and implemented by combining individual circuit breaker characteristics, which can effectively detect arc fault signals in real-time. The proposed integrated AFCI satisfies the UL1699, the USA certification standard, and the Korean circuit breaker standards such as KS C4613 and KS C8321. Data signals are transferred to the management server via ZigBee network to analyze dangerous factors and to prevent unwanted trip. It is also shown by experiments that arc fault signals are detected and analyzed by using the integrated AFCI with ZigBee networks.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.933-937
• /
• 2005

FCBGA가 마더보드에 실장된 후 솔더 조인트에 균열이 생기면 단선이 발생한다. 솔더 조인트의 신뢰성을 평가하기 위한 방법 중 전단강도시험(shear test)은 약한 솔더 조인트를 판별하기 어려워 양품 로트와 불량 로트를 구별할 수 없으며, 인장강도시험(pull test)은 솔더 볼의 위치별 산포가 크고, peel test는 품질을 정량적으로 나타낼 수 없는 등의 문제가 있다. 새로운 시험 방법은 Area Pull Test(이하 APT)라 명명했으며 peel test와 pull test를 합한 개념으로서, 시험 샘플을 만드는 과정은 peel test와 동일하다. 솔더 조인트의 인장강도 측정은 지그를 만들어서 FCBGA 전체를 당겨서 측정하였다. 샘플은 Ni도금 두께를 3, 5, 8 ${\mu}m$로 제작하여 불량(3${\mu}m$), 양품으로 구분하였고, 양품 또한 품질 수준을 두가지(5,8${\mu}m$)로 나누었다. 그 결과 peel test 기준에 의거한 불량, 양품을 정량적인 수치(인장강도)로 판별할 수 있었으며, 솔더 조인트의 파괴모드별 인장강도를 구분 할 수 있었다.

• Composites Research
• /
• v.33 no.3
• /
• pp.169-175
• /
• 2020

The compression and tension test were performed to evaluate the stiffnesses of the conical composite lattice structures and results of test were compared with finite element analysis results. Because of difficulty to perform simple tension and compression test due to conical shape, suitable specimens and jig for test were made. Subelements extracted from the structure were prepared for compression test. Compression test of subelement was performed and compressive strains in fiber direction were measured. Compressive stiffness of the helical rib was verified by finite element analysis results. For stiffness of hoop rib, hoop ring specimens were extracted from the structure. Tension test of hoop ring specimen was performed to apply bending deformation to hoop rib. Stiffness of hoop rib was verified by finite element model considering various fiber volume fraction in thickness direction.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.767-773
• /
• 2010

This paper describes development of a non-explosive separation device which can be equipped on small satellites. The spur geared micro DC motor, which has high reliability and advantage of price, is adopted as an actuator. The proposed separation device has resettability and it does not need extra jig to reload. In addition, the simple structure makes it easy to fabricate and assemble. To verify the performance of the proposed device, the response time tests, maximum preload tests and maximum shock level tests were performed. Also, through the vibration tests and thermal vacuum tests, feasibility of the proposed separation device was shown in launching and space environments. Therefore, we expect that the proposed separation device can replace the imported separation devices in near future.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.5
• /
• pp.28-33
• /
• 2022

A pipe is a hollow, long-form part that is primarily used to transport fluids, such as liquids or gases. Pipes are used in a range of applications in different fields from mechanical purposes to architecture and electrical uses. Despite the significance owing to various usability of pipes, few studies have been conducted using the physical property test method. The tensile test is widely used as a method to check the physical properties of the pipe. The existing pipe tension test contains the possibility to cause errors, which are fractures outside the gauge distance and cross-sectional deformation of the pipe. In this study, a novel pipe tension test method using a jig is presented and pipes with various materials are tested. It is expected that the proposed method can reduce errors that occur in conventional pipes and also obtain more accurate values to enable more efficient testing.

• Journal of the Korean Society for Railway
• /
• v.2 no.2
• /
• pp.1-5
• /
• 1999

Based on the development of designed technology for aluminum carbody. the prototype aluminum carbody has been constructed. All extrusion profiles required for the carbody has been produced and their quality has also been proven. For sound construction. welding technology to join aluminum extrusion profiles has been developed and jigs for precise assembly of blocks have been made. The aluminum carbody for urban subway train has been completed with the required chamber being set and the welding deformations being constrained by jigs. The safety of the carbody structure has also been proven by the static load test. And also, painting technology has been developed and the surface of the carbody has been pre-treated and painted. The developed technology to construct the aluminum carbody can be used in mass production of aluminum cars ordered by domestic and foreign customers.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.420-426
• /
• 2014

In this paper, we have implemented the low temperature fluidity test system with the composited fuel filter and heater, which has tested the low temperature fluidity of gasoline, an engine start time, the consumption of electricity and power to evaluate the system performance. The test condition have used the diesel fuel, the normal temperature, the diesel fuel supply pressure $3.4kgf/cm^2$ at $-20{\sim}-30^{\circ}C$, the fuel supply quantization 60 l/H, the setting current 30 A and the voltage $13V_{dc}$. In order to simulate the operation of diesel fuel filter, we will establish the composited fuel filter into test jig, and be filled with chamber tank and filter by a constant flow quantization and pressure. After these, it shall be cold for setting time. And then we have measured the consumption current and power of heater, an operating time and pressure of filter.