• Analytical Science and Technology
• /
• v.22 no.3
• /
• pp.191-200
• /
• 2009

The aim of this study was to evaluate and establish of emission test method for liquid phase building materials such as paint, adhesive, sealant by emission cell. A small-scale emission chamber and emission cell were used to evaluate emission of TVOC from paint, adhesive, sealant. The quantity of TVOC emission were measured by a gas chromatography/mass spectrometry (GC/MS). Background concentration of TVOC was below $10{\mu}g/m^3$ in the emission chamber and cell. Air tightness and recovery in chamber and cell showed good results. The recovery of thermal desorber for toluene and n-dodecane were about 120%. The repeatability of response factor and retention time in GC/MS below 30%. The method detection limit of VOCs ranged 0.04~8.82 ng. The concentration of TVOC emission using emission cell was 1.35~1.41 times higher than emission chamber. The correlation of TVOC emission using chamber and cell method was significantly high (r=0.91~0.97).

• Journal of the Korean Geotechnical Society
• /
• v.18 no.1
• /
• pp.133-140
• /
• 2002

Phosphogypsum is a by-product from the phosphoric acid process for manufacturing fertilizers. It consists mainly of $(CaSO_4.2H_2O)$ and contains some impurities such as$(P_2O_5)$, 불소$(F_-)$, and organic substances. The annual world production of this material is up to 150 million tons and is up to 1.57 million tons in Korea. Therefore studies describe application of phosphogypsum to daily and middle cover materials in landfill. For this Purpose, experiments were performed to evaluate the engineering properties of the material by sieve analysis, specific gravity, consistency of soil, compaction, CBR, permeability, mi environmental characteristics of leaching test, reactor test. The results of this study are as follows : The mixing and layer conditions of CBR value are 6.2~6.3%, coefficient of permeability is $\alpha$$\times10_{-5}~10_{-6}cm/sec$. And leaching test results are far below than those of regulatory requirement of Waste Management Act, Soil Environment Preservation Act in Korea and RCRA in USA. Therefore phosphogypsum can be used as daily and intermediate cover materials in landfill.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.703-708
• /
• 2006

The slurry infiltrated fiber concrete(SIFCON) is recognized as one of the most promising new construction materials. Compressive and direct tensile tests are performed to investigate the mechanical property of SIFCON. Hooked-end steel fibers are used in the mix with fiber volume fraction varied from 4% to 10%. The water/cement ratio is kept constant at 0.4. The amount of silica fume added is 10% by weight of cement and 0.5% of water reducing agent is added to improve the workability of the slurry. The test results in this study show that the compressive strength of SIFCON is about 1.59 to 2.68 times in comparison with the cement paste. Tensile strength is showed the enhancement of about 2.51 to 8.77 times. It is also observed that the toughness and ductility of SIFCON are increased significantly with the increasing in fiber volume fraction.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.3
• /
• pp.173-179
• /
• 1994

Test results to evaluate the rr~echanical properties of epoxy-coated reinforcing bars are described. Tests include adhesion, impact, bend, and abrasion test of epoxy coating to reinforcing steel, specified in relevant KS and ASTM standards. Three nomnal thicknesses of epoxy coating, $120{\mu}m$, $220{\mu}m$, $300{\mu}m$ are used. The results show good adhesion and abrasion resistance satisfying the requirements. The results also show faily good bendability. However, the thicker the coating, the weaker the adhesion is. Impact resistance is in the tolerable range, but it is recorrmerided that careful treatments are required during handling of epoxy-coated bars. From the results, epoxy-coated bars, with a coating thickness ranging from $150{\mu}m$ to $300{\mu}m$, should well perform for fabrication in field construction.

• Progress in Medical Physics
• /
• v.17 no.2
• /
• pp.123-129
• /
• 2006

A test code was written to apply the EGS5 Monte Carlo code recently published to radiotherapy. This test code was designed to calculate the depth dose in cylindrical phantom for point source model. The evaluation of the test code was peformed by calculating the depth dose curves for high energy electrons of 5, 9, 12, and 15 MeV photons of Co-60 and 10 MV in water and comparing the results with DOSRZ/EGS4 results. In depth dose results, the differences between test code and DOSRZ/EGS4 were estimated to be less then ${\pm}1.5%\;and\;{\pm}3.0%$ approximately for electron and photon beams respectively.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.10a
• /
• pp.196-203
• /
• 2005

축산식품 고기내의 잔류항생물질을 신속하고 간편하고 정확하게 분석하기 위한 시험법 개발 을 목적으로 하였다. 축산식품내의 일반적인 잔류항생물질에 대한 지금까지의 분석법으로는 Bioassay법, TLC법, ELISA법, GC법 및 HPLC법 등이 있지만 Streptomycin/Dihydro streptomycin, Neomycin에 대한 HPLC법은 거의 확립되어 있지 않은 실정이다. 우리나라의 공인 검사법으로는 Bioassay법 및 HPLC법 등이 있지만 그러나 지금까지의 방법으로는 검출감도가 낮은 것이 큰 문제점으로 되어 왔다. 본 연구에서는 DST에 대한 HPLC법에 대한 보고한 P. Edder 방법 중에 clean-up과정 및 이동상 조건을 대폭 수정하여 DST의 분리 및 검출감도를 낮추려고 시도하였다. 본 연구에 사용된 유도체화 장치 Post-Column Derivatization Instrument PCX 5100 (Pickering Laboratories, Inc.)의 컬럼온도는 $40^{\circ}C$, 오븐온도 $55^{\circ}C$, reagent 유속 0.6ml/min mobile phase 유속 0.8ml/min으로 검출기는 형광검출기를 이용하여 DST 검출에 대해 만족할 만한 결과를 얻었다. 이때의 분석소요시간은 약 15분이었다. 표준시료 DST의 검량선은 넓은 농도범위(0.02${\sim}$1.0ppm)에서 양호한 직선성을 나타냈다. 본 시험법에 의한 검출한계는 limit of detection (LOD)은 0.02ppm이었으며, 적어도 고기에서의 MRL이 0.6ppm임을 감안하면 DST를 정량적으로 정도 좋게 측정할 수 있다는 것을 확인했다. 상기의 조건하에서 실제시료인 고기에 표준 DST를 1ppm을 spiking한 후 SPE상에서 SCX(Strong cation exchange column)을 통한 clean-up과정을 거친 후의 DST의 limit of quantification(LOQ)는 약 0.47ppm이었으며, 이에 대한 회수율은 97.7%(n= 8)를 나타냈다. 실제 codex에서 권장한 고기의 MRL이 0.6ppm인 점을 감안하면 codex 권고치에 도달할 수 있는 것으로 판단되었다. 따라서 본 연구에서 개발된 시험법은 지금까지 국내적으로 DST에 대한 시험법이 확립되어 있지 않은 것으로 이와 아울러 간편한 parallux와 병용해 DST에 대한 정량 및 정성 분석을 유도체화 장치 및 형광검출기를 이용해 잔류항생물질 DST에 대한 분석시험법의 개발이 가능하다고 여겨진다.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.10a
• /
• pp.310-316
• /
• 2005

축산식품(우유)내의 잔류항생물질을 신속하고 간편하고 정확하게 분석하기 위한 시험법 개발을 목적으로 하였다. 축산식품내의 일반적인 잔류항생물질에 대한 지금까지의 분석법으로는 Bioassay법, TLC법, ELISA법, GC법 및 HPLC법 등이 있지만 Streptomycin/dihydrostreptomycin, neomycin에 대한 HPLC법은 거의 확립되어 있지 않은 실정이다. 우리나라의 공인 검사법으로는 Bioassay법 및 HPLC법등이 있지만 그러나 지금까지의 방법으로는 검출감도가 낮은 것이 큰 문제점으로 되어 왔다. 본 연구에서는 STP에 대한 HPLC법에 대한 보고한 Edder 방법 중에 clean-up 과정 및 이동상 조건을 대폭 수정하여 STP의 분리 및 검출감도를 낮추려고 시도하였다. 본 연구에 사용된 유도체화 장치 Post-Column Derivatization Instrument PCX 5100 (Pickering La-boratories, Inc.)의 컬럼 온도는 $40^{\circ}C$, 오븐온도 $55^{\circ}C$, 유도체화 용매 유속 0.6ml/min 이동상 유속 0.8ml/min으로 검출기는 형광검출기를 이용하여 STP 검출에 대해 만족할 만한 결과를 얻었다. 이때의 분석소요시간은 약 15분이었다. 표준시료 STP의 검량선은 넓은 농도범위(0.02${\sim}$1.0ppm)에서 양호한 직선성을 나타냈다. 본 시험법에 의한 검출한계는 limit of detection(LOD)은 0.02ppm이었으며, 적어도 우유에서의 MRL이 0.6ppm임을 감안하면 STP를 정량적으로 정도 좋게 측정할 수 있다는 것을 확인했다. 상기의 조건하에서 실제시료인 우유에 표준 STP를 0.5ppm을 spiking한 후 SPE상에서 SCX(Strong cation exchange column)을 통한 clean-up과정을 거친 후의 STP의 limit of quantification(LOQ)는 약 0.44ppm이었으며, 이에 대한 회수율은 89.7${\pm}$2.3%(n=6)를 나타냈다. 실제 CODEX에서 권장한 우유의 MRL이 0.6ppm인 점을 감안하면 CODEX권고치에 도달할 수 있는 것으로 판단되었다. 따라서 본 연구에서 개발 된 시험법은 지금까지 국내적으로 STP에 대한 시험법이 확립되어 있지 않은 것으로 이와 아울러 간편한 parallux와 병용해 STP에 대한 정량 및 정성 분석을 유도체화 장치 및 형광검출기를 이용해 잔류항생물질 STP에 대한 분석시험법을 개발하였다.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.386-391
• /
• 2019

This paper presents analysis results for the effect of the directional group delay of the antenna to implement a precision radio navigation system. The analysis was conducted through antenna simulation and test, and the test was performed in an anechoic chamber. The directional group delay of the antenna was calculated in phase-based analysis method. The results showed that a variation of up to 7.7ns in group delay occurred per antenna direction. The group delay variation from the analysis is 2.31 meters when converted into distance. It was tested using a real radio navigation system based on the time of arrival (TOA). The test verified the distance variation of 2.1 meters, and this value is similar to those obtained from the simulation and chamber test analysis.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.8
• /
• pp.89-97
• /
• 2008

A series of field tests were performed to investigate the behavior of jacket anchor and to evaluate the ultimate bond stress of jacket anchor. From twelve sets of field tests on the jacket anchor and general type ground anchor, it was observed that the pullout resistance of jacket anchor is significantly larger than that of the ground anchor and that the plastic deformation of jacket anchor is significantly smaller than that of general ground anchor at the same loading cycle. Especially in gravel layers, the jacket anchor provides more than 250% increase in ultimate resistance and more than 600% reduction in plastic deformation, compared with the general ground anchor. Finally, the relationship between the injection pressure and overburden pressure is proposed to determine the optimum injection pressure, based on additional field test results.

• Corrosion Science and Technology
• /
• v.8 no.2
• /
• pp.53-61
• /
• 2009

In this study, both evaluations by visual imaging for exterior view of coating and by EIS were executed for epoxy primer coated specimens deteriorated by accelerated test, and comparison and analysis were carried out for 2 evaluation methods. In the comparison between total damaged area ratio acquired by image processing method and deterioration point, higher deterioration points were appeared for rusted specimens than for non-rusted specimens. It is attributed that deterioration point per unit area ratio given for rust is higher than for peeling. In the comparison between total damaged area ratio and EIS result, impedance of coating was largely decreased as about TEX>$10^4{\Omega}{\cdot}cm^2$ or less when rust area ratio is more than about 0.1%, and blistering area ratio is more than about 3%. Charge transfer resistance ($R_{ct}$) and double layer capacitance ($C_{dl}$) values were appeared for all specimens except 2 ones, which shows that water is accumulated and steel substrate is corroded at coated film-steel interface. In the comparison between deterioration point and EIS result, more than 10 points as deterioration point were given for specimens of below $10^6{\Omega}{\cdot}cm^2$ of impedance at low frequency. For specimens deteriorated by NORSOK cyclic test, impedance was lowest of all, though deterioration point was not high. It is thought to be attributed that coating system and accelerated deterioration condition of cyclic tested specimens were different from those of main specimens. From the result, it is thought that coating resistance can be relatively more decreased than deterioration degree estimated from exterior view under more severe corrosion environment or in the present of more complex deterioration factors.