• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.354-360
• /
• 2009

We have constructed and analyzed the performance of a simple fiber bundle multi-focal microscope. The microscope had a fiber bundle substituted for micro-lens array that is the core part of MMM(multi-focal multi-photon microscope). The MMM is a type of confocal microscope. To analyze the performance and characteristics of the fiber bundle multi-focal microscope, three types of samples were used: a standard grating, USAF 1951(7, 3), and 1951(7, 6). Using two polarizers and a polarizing beam splitter, we eliminated noise and got clear images. We obtained the FWHM of fiber spot images with the standard grating using two different magnifier lenses which were 63X and 20X, and found an image of the sample as a distribution of fiber spot images. For this case we used the low magnification lens, which gives denser distribution, so that we could get clearer images. In order to test the resolution of the fiber bundle multi-focal microscopic system, we used the USAF 1951 sample which has a smaller line interval than that of the standard grating. The FWHM of the line width of the image coincides well with the real line width of the USAF 1951 sample. We confirmed the performance of a fiber bundle multi-focal microscopic system which is relatively simple but has submicron resolution and is able to get 1600 images at the same time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1213-1219
• /
• 2012

A remote $CO_2$ laser system can rapidly change both the distance and the direction of the laser beam by moving a lens and rotating mirrors. It is then easy to weld complex patterns of weld lines. A conventional spot weld joint specimen and a remote $CO_2$ laser weld joint specimen with complex weld line patterns were prepared and tested both statically and dynamically. The relationships between the fatigue strength, i. e. the maximum cyclic force, and the fatigue life were obtained. The fatigue strength of the tested welded joints at two million cycles was found to be approximately 10% of the static strength. Furthermore, it was observed that the fatigue fracture mode changed with the level of the applied cyclic force. The fatigue crack origins were confirmed as the highest stress points found in the structural analysis. The maximum cyclic stress for different weld patterns converges as the fatigue life approaches two million cycles.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.37-43
• /
• 2007

We developed the equipment to measure the MTF(modulation transfer function) of an optical system for automatically inspecting the surface condition of an LCD substrate. We have made an object generator with USAF(United States Air Force) targets of three bar patterns and an integrating sphere, and an image analyzer with a 2 dimensional CCD(charge coupled device) and a relay lens. The MTF of the lens under test was obtained by correcting the measured CTF(contrast transfer function) which is the ratio of the contrast in the image of the USAF target to the contrast in the object. We have measured an optical system of F/13.65 (2.6x), the MTF are 30.6 % tangential plane and 26.1 % sagittal plane at 62.5 1p/mm.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.45.1-45.1
• /
• 2009

과학기술위성 3호의 주탑재체인 MIRIS (Multi-purpose InfraRed Imaging System)는 우주관측카메라 (Space Observation Camera, SOC)와 지구관측카메라 (Earth Observation Camera, EOC)가 독립적인 시스템으로 구성되어 있다. 지구관측카메라는 유효 구경 100 mm, F/5의 광학계로 3-5 마이크론 파장영역을 관측하며, 국내에서 개발된 적외선 검출기의 우주 인증 시험과 유사시 한반도 적외선 감시를 주요 목적으로 하고 있다. 고도 700km에서 지상을 볼 때 약 42m/pixel의 공간분해능을 나타낼 것으로 기대하고 있다. 지구관측카메라의 인증 모델(Qualification Model)은 냉동기를 제외한 모든 부품이 국내기술로 제작되었으며, 미러 본딩 및 릴레이 렌즈 조립 기술, 적외선 영상 검교정 기술 등 다양한 경험과 도전을 제공했다. 이 발표에서는 지구관측카메라 인증모델을 이용하여 수행한 주요 시험 과정을 소개한다. 국내 회사 (주)i3 system에서 제작된 적외선 검출기는 $320\times256$ HgCdTe array (평균 양자효율 80% 이상) 이며 77K에서 정상적으로 운영된다. Micro Stirling Cooler에 의해 듀어는 전원을 켠 후 5분 이내에 검출기 운영온도인 77K까지 내려간다. 적외선 광학계의 정렬, 시스템 MTF 측정, 흑체 측정 및 검교정 작업을 수행한 후 야외에서 다양한 경우에 대해 Field Test를 진행했다. 이 발표에서는 Field Test 과정과 이를 통해 얻은 결과를 발표하고, FM (Flight Model) 제작에 있어 수정해야 할 사항들을 제안해 본다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3151-3153
• /
• 2000

현재 국내에서 사용되는 교통신호등용 전구는 전량 해외에서 수입하는 백열전구로써 발열에 의한 낮은 발광 효율과 짧은 수명으로. 전력의 과소비와 과중한 전력요금 부담. 잦은 유지보수로 관리비용의 증가와 교통환경 악화의 원인이 되고 있으며, 국가적으로는 귀중한 에너지의 낭비, 첨두부하 증가에 따른 전력수요관리의 어려움, 발전용 화석연료 사용증가에 따른 환경오염 유발 등의 문제가 발생하고 있다. 그러나 $8{\sim}12$인치의 원형(또는 사각) PCB 기판에 수백개의 고휘도 LED(반도체 발광 다이오드, Light Emitting Diode)와 구동회로로 구성되는 LED 교통신호등은 발열에 의한 열손실이 거의 없고, 특정 파장대의 단색광을 발광하여 착색렌즈 사용에 따른 빛손실이 없어 80% 이상의 대폭적인 에너지 절약이 가능하며. 또한 긴 수명으로 유지보수비용의 절감 및 교통환경개선 효과가 크게 기대되어 미국, 일본 등 고휘도 LEB 기술 선진국을 중심으로 경쟁적으로 LED 신호등 기술개발에 심혈을 기울이고 있으며, 일부 시범 보급중에 있다. 교통신호등은 특성상 국민의 안전과 직결된 사안으로 엄격한 규격으로 제한하고 있다. 그러나 LED 신호등은 발광 원리 및 발광 방식이 기존의 전구식과 달라 현재 규정된 시험방법으로 직접 평가가 불가능하다. 따라서 우리나라의 경우 LED 제조 기술은 세계적인 수준이나 LED 신호등에 대한 기술개발 및 보급은 현실적으로 어려운 실정이다. 본 논문에서는 에너지절약형 우리나라 환경 특성에 적합한 LED 교통 신호등의 규격 제정 및 국내 보급환경 구축을 위해 LED 신호등에 대한 시제품의 특성을 장시간의 옥외 시험을 통해 평가하고자 한다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.229.2-229.2
• /
• 2012

지금까지 해외의 여러 달 궤도선에서 달의 영상을 다양한 방법으로 관측한 것에서 알 수 있듯이 영상 관측은 달 탐사에서 중요한 부분이다. 특히 그 중에서 입체 영사기(Stereo Imager)는 달의 3차원적 영상을 관측하여 달 표면의 구조를 파악할 수 있고 분광 카메라(Hyperspectral Camera)는 달 표면을 이루고 있는 물질을 분광 정보를 통해서 알아낼 수 있다. 본 연구에서는 우리나라가 2020년경 독자적인 달 궤도선을 계획하고 있는 것에 발맞추어 이 두 관측 장비를 설계해 보았다. 본 연구에서 설계한 탑재체는 하나의 광학계를 이용해 가시광 영역에서 동시에 입체 영상과 분광 영상을 얻을 수 있는 장치이며, 달 표면에서의 궤도선의 속도와 저장 가능한 정보의 양을 고려하여 100 km의 고도에서 속도를 1.6 km/s로 가정할 때 interline CCD가 17.5 m의 공간 분해능을 갖기 위해 92 frame/s 이상의 frame rate로 관측을 수행할 수 있게 하였다. 특히 분광 카메라는 wedge filter를 사용하여 광학계의 부담을 줄였으며 검출기로는 interline CCD를 사용하여 channel 수를 조절할 수 있도록 하였다. 또한 달 표면을 구성하는 입자의 크기에 대한 정보를 얻을 수 있는 편광판도 설치 하였다. 시험 모델의 문제점을 분석하여 새롭게 개선된 탑재체를 설계하여 개발하였다. 렌즈를 수정해 vignetting과 왜곡 현상을 보정하였고 전체 무게를 1.5 kg으로 줄여서 시험 모델보다 30% 이상 줄일 수 있었다. 파장 분해능은 20nm로 시험모델보다 더 개선된 분해능을 얻을 수 있었다. 출력 효율의 증대를 위해 power board의 수정을 수행하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.293-304
• /
• 2005

As the eye irritant test of lens washing agent, ReNu$^{TM}$ was analysed using Draize methods (1959) according to KFDA Guidelines. In addition, to test the potential toxicity of test articles the ratio of inflammatory cells and non-inflammatory epitheloid cells were also observed using smear cytology methods against ocular discharge. At test, the histopathological changes on the cornea, iris, retina and sclera were also observed in all animals. Slight irritancy of the cornea and conjunctiva were observed at 1, 2 and 3 days after dropping in non-washing group. The Mean Index of Ocular Irritation(MIOI) of these points are detected as 4.17, 3.00 and 1.33, respectively. In washing group, slight irritancy of the cornea and conjunctiva were observed at 1 and 2 days after dropping with MIOI as 0.67 and 1.33, respectively. Therefore, ReNu$^{TM}$ was considered as non-irritating materials because the MIOI is detected below 5.00 throughout the whole experimental periods in both washing and non-washing groups. The Index of Acute Ocular Irritation(IAOI) is also detected as 4.17(1 day after dropping). Except of the somewhat increase trend of the inflammatory cell ratios in ocular discharge at 1 day after dropping of non-washing group, but significances are not detected, on the other hand, no meaningful changes on smear cytology of ocular discharges are observed in this study. In addition, no abnormal histopathological changes on the cornea, iris, retina and sclera were also not detected in ReNu$^{TM}$ dropping group compared to that of non-treated control eyes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.74-80
• /
• 2021

This study investigated the process quality level of a K5 gas mask, which recently acquired its operational capability, through statistical process analysis for the mass production stages and their lots. The tensile adhesion strength was the only operating requirement in the manufacturing process of the K5 gas mask. For this purpose, the results of tensile adhesion strength between the lens and facial rubber during the initial and second mass production stages were analyzed using conventional statistical and statistical process analysis methods. The conventional statistical results indicated that the second mass production stage was better than the initial mass production stage. In cases of a control chart and process capability of tensile adhesion strength, the process quality level was also improved by following the mass production stages. The improvement was caused by process stabilization and work skill elevation. These results and methods are expected to be conducted and utilized in the third mass production stage. Moreover, quality improvement of K5 gas mask mass production can be achieved using the Lean 6 sigma procedure, MDAIC (Define, Measure, Analyze, Improve, Control).

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.173-178
• /
• 2013

Purpose: This study is to predict refractive errors according to uncorrected visual acuity using uncorrected visual acuity of the first glasses wearers. Methods: For 886 children who visited an ophthalmic clinic, subjective refraction was carried out with maintain refraction (MR) and cycloplegic refraction (CR), and objective refraction was carried out using auto-refractometer. Uncorrected visual acuity and corrected visual acuity were tested using on a trial lens and a Han's visual acuity chart. Results: In correlation between with the uncorrected visual acuity and refractive the myopia was the highest (r=0.774) and followed by hyperopia (r=0.670), simple astigmatism (r=0.623), simple with-the-rule astigmatism (r=0.604)and simple against-the-rule astigmatism (r=0.508). Conclusions: There were differences in the predictions between uncorrected visual acuity and refractive error according to the types of refractive error and astigmatism.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.4
• /
• pp.429-434
• /
• 2014

Purpose: To analyze thermal effect on mechanical properties of domestic commercial polymer-based eyewear frames. Methods: In this study, materials of cellulose acetate, polyamide, epoxy, and polyetherimide were exposed to high or low temperature and were mounted on universal test machine (TO-100-IC) for tensile strength test. Elastic behavior, Young's modulus, maximum displacement, and fatigue were tested with various temperature ($-25^{\circ}C$, $25^{\circ}C$, $60^{\circ}C$). Results: As a result, at room temperature, displacements of materials were changed with increasing impact load. At low temperature ($-25^{\circ}C$), maximum displacements of all specimens were decreased but young's modulus were increased. However, at high temperature, maximum displacements of all specimens were increased but young's modulus were decreased. Conclusions: Degree of displacements due to fatigue behavior was increased following direction of PEI, epoxy, polyamide, acetate. We concluded that commercial polymers used in eyewear frames physical properties were changed differently to exposed temperature.