• Composites Research
• /
• v.36 no.3
• /
• pp.193-198
• /
• 2023

Currently, there are many discussions about composite materials and 3D printed composite material to weight reduction of ships. A test was conducted to confirm the applicability of the 3D printed composite material to ships and offshore structures by linking the 3D printing technology with excellent productivity and the composite material with corrosion resistance and lightweight characteristics in salt water environments. In order to apply the 3D printed composite material used in this paper to ships and offshore structures, the temperature environmental effects that can be exposed in the marine environment should be considered. Therefore, the tensile test was conducted with specimen of Carbon + Onyx, Carbon + Nylon, HSHT glass + Onyx, HSHT glass + Nylon material in low temperature (-50℃), room temperature (20℃), and high temperature (50℃) environments that can be exposed to the marine environment. As a result of the tensile test, the carbon + onyx specimen showed the highest tensile strength and the HSHT glass + onyx specimen showed the highest tensile strain. In addition, by analyzing the tested specimens, the failure mode of the 3D printed composite material specimens exposed to various temperature environments was analyzed.

• Composites Research
• /
• v.30 no.2
• /
• pp.149-157
• /
• 2017

In this paper, fracture behavior of laminated composites with notch was studied by cohesive zone modeling approach. The numerical modeling proceeded by first generating 3 dimensional solid element meshes for notched laminated composite coupon configurations. Then cohesive elements representing failure modes of fiber fracture, matrix cracking and delamination were inserted between bulk elements in all regions where the corresponding failures were likely to occur. Next, progressive failure analyses were performed simulating uniaxial tensile tests. The numerical results were compared to those by experiment available in the literature for verification of the analysis approach. Finally, notched laminated composite configurations with selected stacking sequences were analyzed and the failure behavior was carefully examined focusing on the failure initiation and progression and the dominating failure modes.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.1-6
• /
• 2007

The present study provides the compressive design allowable of a unidirectional glass/epoxy composite laminate processed by wet lay-up at room temperature. The compressive strength values measured from 39 specimens have been assumed to follow the two-parameter Weibull distribution. Following the statistical guidelines provided by MIL-HDBK-17F, the B-basis and A-basis values of the aforementioned laminate are found to be 82.6% and 65.9%, of the mean compressive strength, respectively. The B-basis value is then discounted further at 50% for the in-situ application on the main wing spar caps of an experimental canard aircraft.

• 한국전기화학회:학술대회논문집
• /
• 2002.07a
• /
• pp.251-258
• /
• 2002

[ $Ni-10wt.\%Cr$ ] green sheet를 불활성분위기로 $900^{\circ}C$까지 승온시킨 다음 부분산화$(P_{H2}/P_{H2O}=10^{-2})$후 $1100^{\circ}C$에서 3시간 환원처리를 시키는 소결공정으로 Ni-Cr 고용체 기지 주변에 작은 $Cr_2O_3$ 알갱이가 고르게 분포하는 anode(Anode Sintered in Partial oxidation - Reduction atmosphere; ASPR)를 제조하였으며, creep 변형률이 $2.8\%$로서 미세구조에 따른 creep 특성의 비교를 위해 기존의 환원분위기에서만 소결시킨 anode(Anode Sintered in Reduction atmosphere only; ASR)의 $11\%$보다 우수한 creep 저항성을 나타내었다. $Cr_2O_3$ 알갱이가 분산된 미세구조른 부분산화 시 Cr과 Ni의 산화속도 및 확산속도의 차이로 인해 형성되는 것으로 사료되며, creep 전${\cdot}$후 ASPR 시편의 SEM 및 기공률 분석결과 매우 안정적으로 그 형상 및 구조를 유지하고 있음을 확인할 수 있었다. 또한 ASPR 시편의 전기전도도는 약 $15\times10^6\;S/m$로서 기존 ASR 시편의 전기전도도와 유사함을 알 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.133-138
• /
• 1991

일반적으로 고무를 비롯한 점탄성재료는 형상 및 크기를 적절히 조절함으로 써 한 방향 이상으로의 원하는 스프링상수를 얻을 수 있으며, 금속에 비하여 내부 마찰에 의한 에너지 발산이 매우 크기 때문에 강제 진동시의 진폭저감 및 충격에 따른 자유진동의 감쇠에 널리 이용되고 있다. 이와 같은 진동감쇠 에 점탄성재료를 효과적으로 사용하기 위해서는 복소탄성계수 즉, 탄성계수 와 손실계수를 정확하게 알아내는 것이 필요하다. 점탄성재료의 복소탄성계 수는 주파수, 온도 및 변형률등에 따라 변하므로 이와 같은 사용조건의 함수 로 구해야 한다. 복소탄성계수를 실험적으로 구하는 방법은 여러가지가 있으 며 실험의 용이성과 관심대상에 따라 적절한 방법을 선택하게 된다. 본 연구 에서는 주파수변화에 따른 복소탄성계수를 임피던스법으로 집중질량 모형을 이용하여 구하려고 할 때, 실험데이타로부터 보다 정확한 결과를 얻기 위하 여 적절한 시편의 크기를 결정하는 방법을 제시하고자 한다. 이를 위해서 시 편내의 파동전달효과와 포아송비와 관련된 양단제한효과 그리고 정하중시 압축변형에 대한 시편의 좌굴등을 고려하여 이론적으로 해석하였으며 실험 적으로도 검증하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.4
• /
• pp.421-435
• /
• 2012

Rock excavation (removal) tests are performed with effective parameters using an abrasive waterjet. For verification of the field rock excavation capabilities, the removal performance and level of efficiency are analyzed for hard granite rock in terms of the water pressure, exposure time of the jet, and the standoff distance. In particular, experimental tests are performed with a long standoff distance required condition in the real excavation field. The rock removal performance level changes according to the rock properties. In this study, various rock specimens are used and P-wave velocities are measured in order to determine the correlation between the removal performance and the P-wave velocity. As a result of the experimental study, the effect of waterjet parameters on rock removal is analyzed.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.1
• /
• pp.30-36
• /
• 1991

Since the Complex Young's Modulus of acoustic materials is a function of frequency under a static load, a cylindrical specimen modelled by rod-like one with losses is used to determine the dynamic characteristics of materials. The specimen is excited into longitudinal vibration at its one end by shaker and at the other end, loaded by a mass corresponding to the desired static load and thus the transfer function of specimen is measured. This transfer function method is analyzed theoretically and experimentally over a frequency range of 50 Hz to 20 KHz. The analysis includes the measurability of the transfer function, the frequency range of the method and lateral motion effect.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.896-901
• /
• 2015

The skin-frame type structure is designed to investigate the thermal deformation of the wing skin induced by the temperature gradient. In order to effectively simulate the temperature gradient on the wing specimen, a water cooling system is devised on the frame of the specimen. Out of surface skin deformation of the skin-frame type structure made of SUS304 material with respect to the temperature is successfully measured using the digital image correlation (DIC) technique including quantitative evaluation of the measurement uncertainty.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1989.11a
• /
• pp.73-77
• /
• 1989

Ashby등에 의해 비윤활상태에서의 steel의 마모기구도(wear mechanism map)가 작성 발표된바 있다. 이 마모기구도는 지금까지 발표된 steel의 마모연구의 결과를 모아서 seizure, melt dominiated 마모, 산화지배 마모, 소성지배 마모등의 기구가 지배되는 영역을 표준화된 압력과 속도의 변화에 따라 표시한 것이다. 본 연구에서는 베아링강을 모델제료로 하여 마모 diagram을 작성하여 속도와 하중 변화에 따른 mild wear에서 severe wear로의 천이를 관찰하고 각 영역에서의 마모기구에 대해 논하고자 한다. 이 연구에서는 윤활유의 영향을 배제하고 steel ring과 steel pin간의 비윤활 상태에서 마모시험이 행하여졌다. 본 실험에서는 다목적 마모시험을 사용하여 시간에 따라 접촉면적의 형상이 비교적 변하지 않는 pin on ring형태의 시편을 사용하였다. 9.8 N 으로 부터 98 N까지의 하중이, 0.012 m/sec에서 0.012 m/sec까지의 미끄럼 속도에서 마모실험을 행하였다. 각 조합에 따른 조건에서의 마모된 양은 시편의 변이를 측정하여 마모부피를 추정계산하였다.

• Journal of Biosystems Engineering
• /
• v.24 no.3
• /
• pp.243-252
• /
• 1999

The damage caused in the processes and distributions after harvesting the fruits and vegetables is attributed to the mechanical factors such as compressive and impact forces. Compression tests of biological materials provide an objective method for determining the apparent modulus of elasticity and mechanical properties which are significant in quality evaluation and control, and them maximum allowable compressive forces for minimizing mechanical damage. This study was performed to determine the mechanical properties of apple and pear, and to investigate effect of specimen shapes on the mechanical properties of them. A computer program was developed for measuring the mechanical properties and analyzing the data obtained from the measurement. Compression tests on the sample were performed with then replications at each treatment and at 25 mm/min loading rate. Mechanical properties of the apple was generally shown the higher value than those of the pear, and it was though that data obtained form the cylindrical specimen removed from the sample was more reliable than from the specimen cut in half.