• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.533-540
• /
• 2018

Graphene has been reported to be an excellent lubricant additive that reduces friction and wear when coated on the surface of various materials or when dispersed in lubricants as an atomic thin material with the low surface energy. In this study, alkyl functionalized graphene oxide (FGO) nanosheets for oil-based lubricant additives were prepared by using three types of alkyl chloride chemicals (butyl chloride, octyl chloride, and tetradecyl chloride). The chemical and structural properties of the synthesized FGOs were analyzed by Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscope (SEM), and transmission electron microscope (TEM). The synthesized FGOs were dispersed at 0.02 wt% in PAO-0W40 oil and its tribological characteristics were investigated using a high frequency friction/wear tester. The friction coefficient and the wear track width of poly alpha olefin (PAO) oil added with FGO-14 were tested by a ball-on-disk method, and the measured results were reduced by ~5.88 and ~3.8%, respectively compared with those of the conventional PAO oil. Thus, it was found that the wear resistance of PAO oil was improved. In this study, we demonstrated the successful functionalization of GO as well as the improvement of dispersion stability and tribological characteristics of FGOs based on various alkyl chain lengths.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.1
• /
• pp.19-25
• /
• 2008

In this paper, the front end module (FEM) was proposed for 2.4GHz WLAN band by LTCC multilayer application. The FEM was composed of power amplifier IC, switch IC, and LTCC module. LTCC module consists of output matching circuit and lowpass filter as Tx part, bandpass filter as Rx part. Design of output matching circuit for LTCC was used matching parameter from output matching circuit based on lumped circuit on the PCB board. The dielectric constant of LTCC substrate is 9. The substrate was composed of total 26 layers with each 30um thickness. Ag paste was used for the internal pattern as the conductor material. The size of the module is $4.5mm{\times}3.2mm{\times}1.4mm$. The fabricated FEM showed the gain of 21dB, ACPR of less than -31dBc first side lobe and Less than -59dBc second side lobe and the output power of 23Bm at P1dB.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.219-229
• /
• 2020

Recently, since atopic dermatitis is sensitive to skin irritation, it has been suggested that the development of a patch that can effectively exhibit adhesion and absorption to a specific local area while minimizing skin irritation, and capable of appropriate drug release should be given priority. In this study, we tried to develop a hydrogel patch that minimizes skin irritation, adheres effectively to a specific area, and promotes absorption. The atopic patch was formulated into a super-absorbent hydrogel sheet using a freeze drying method. Cell viability assay was carried out using keratinocytes (HaCaT cell) and fibroblasts (L929 cells). In order to investigate the physical properties, FT-IR, FE-SEM, porosity analysis and swelling behavior were investigated. As a result, the newly prepared HA-Dex hydrogel patch was verified by biocompatibility and physical evaluation. In addition, the manufactured hydrogel patch has sufficient moisture absorption capacity and can relieve itching of atopic skin, and is expected to be applied to various drug delivery products for the treatment of atopic dermatitis in the future.

• Tunnel and Underground Space
• /
• v.23 no.4
• /
• pp.288-296
• /
• 2013

In this study, a total of 13 mines were finally selected as study subjects and field measurements were conducted. Thereafter, calculations of thermodynamic natural ventilation were attempted using spread sheets and solutions for natural ventilation of mine types with multiple vertical shafts were obtained. Based on the results, natural ventilation of each mine was quantified. In addition, changes in natural ventilation energy (NVE) and natural ventilation pressure (NVP) were estimated assuming mine deepening and the resultant values were applied to mine conditions to observe changes in flow rates. Natural ventilation pressure in domestic mines is generally calculated to be in a range of 5 Pa~300 Pa. Although NVP increases as the depth increases, resistance also increases. Therefore, as the depth increases, flow rates show a tendency of converging on a certain value because of the relationship between NVP and mine resistance. Natural ventilation using shafts with depth differences is effective up to depths of 200~300 m. However, flow rate change rates resulting from NVP are small at depths deeper than approximately 200~300 m. Therefore, if a mine is deepened over 300 m, NVP will become insufficient and thus additional pressure obtained through mechanical ventilation will be necessary.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.139-139
• /
• 2000

종이는 제조 후 시간의 경과에 따라 노화가 야기되기 시작하며 이에 수반되는 현상으로서 종이의 기계적 강도 손실 및 종이의 색 변화를 들 수 있다. 종이의 노화 현상은 주로 빛, 열, 대기 오염물질, 미생물, 곤충 및 화학약품 등의 외부 인자들에 의해 종이 내에서의 가수 분해 또는 산화작용을 발생시키며 이는 종이의 폭넓은 이용올 제한하는 중요한 원인이 되고 있다. 종이의 노화기작은 주로 산 가수분해 및 산화작용 그리고 가교결합 둥으로 해석되고 있다. 이는 종이의 주 구성요소인 셀룰로오스의 수산기가 반웅하여 카르보닐기를 형성하면 서 저분자화 되거나 산소에 의해 산화되면서 저분자화 되어 종이의 강도적 손실이 일어난다 고 보고되고 있으며 종이의 황색화(Yellowing) 현상은 주원인이 종이에 잔존하고 있는 리그 년이 빛과 열에 의해 반응하여 산화됨으로써 야기된다고 설명되고 있다. 즉, 열이나 자외선 및 가시광션의 조사로 인한 셀룰로오스 및 기타 종이 구성물의 산화에 의해 종이가 퇴색되 거나 강도가 저하되는 현상이 일어나게 된다. 특히 이러한 노화 거동은 상온의 경우에서는 펄프와 종이의 황색화가 천천히 일어나지만 옹도가 점차 올라갈수록 그 속도는 빨라진다. 종이가 노화되면서 일어나는 산화반용은 주로 대기 중의 산소와 접촉하기 쉬운 표변에서부 터 발생하기 쉽다. 열처리를 통해 표면에서의 산화 작용은 촉진되고 종이의 구성원소의 결 합에 화학적 변화가 야기된다. 이를 분석하기 위해서 모든 원소가 독특한 결합에너지를 가 지고 있다는 것에 착안 시료 표면에 특정 x-선 및 전자빔을 입사하여 방출하는 광전자의 에너지를 측정함으로써 시료 표면의 조성 및 화학적인 결합상태를 알 수 있는 ESCA ( (Electron Spectroscopy for Chemical Analysis)를 이용하였다 .. ESCA는 주로 표면 원소의 규 명 및 정량분석과 화학결합 상태의 정성, 정량 분석, 깊이에 따른 원소의 농도 분포 분석, 고분자화합물의 특성 조사, 표면 원소의 화학결합에 따른 전자상태 연구 둥에 활용되 고 있 다. 즉, 종이가 노화되면서 원소들 사이에 변화되는 결합을 이러한 에너지 분석에 의해 원소 정성분석 또는 정량분석을 하고자 하였으며, 이를 분석하여 열처리 시 종이 표면에서 일어 나는 변화를 구명하고자 하였다. 이에 따라 본 연구에서는 종이의 노화를 가속화시키는 빛, 대기오염물질, 및 기타 다른 인 자들은 배제하고 열 만을 가해 노화의 진행속도를 높인 후, 노화 진행 시 종이 표변에 일어 나는 산화작용 및 가수분해를 표면 분석 장치인 ESCA를 이용하여 종이의 주 구성원소인 탄소와 산소가 열처리 시 변하는 에너지를 측정하였다. 또한 카르복실기 정량과 종이의 pH 측정 및 X -ray Diffractometer를 이용하여 결정화도를 측정하였다. 본 연구의 결과, 시간의 경과에 따라서 탄소의 결합에너지는 분포가 C-H에서 COO-, 또는 C=O로 달라짐으로써 종 이가 산화되고 있다는 것을 알 수 있었다. 또한 이 결합에너지 분포의 변화가 펄프의 종류 에 따라서 다르게 이동함으로써 제조된 시트의 표면 산화반응이 서로 다르게 일어나고 있음 을 알 수 있었으며, 이는 사용한 펄프의 화학 조성분의 차이에 기인한 것이라 사료된다.

• The Journal of Korean society of community based occupational therapy
• /
• v.6 no.2
• /
• pp.39-49
• /
• 2016

Objective : The aim of this study was to investigate the status of infection for infectious diseases and infection control in occupational therapy. Methods : This study was implemented through the survey composed of the status of infection for infectious disease and the infection control and awareness of the infection control. The duration of survey was a month, June, 2016. 111 occupational therapists in 23 room of occupational therapy completed a survey. Results : 34.8% of occupational therapy room experienced the infectious diseases. This study showed the occupational therapists have high performance in almost items of infection control. But the occupational therapist showed the low performance in the items including 'Washing hands over than 15 seconds', 'Washing hands before and after wearing gloves', 'Wearing mask during treatment', 'Throwing away mask after using' and 'Washing your uniform separate from other cloths'. Almost occupational therapists think infection control is important and the education for infection control is needed in occupational therapy. But most of the education is implemented in only medical institution. Conclusion : To improve performance in infection control, individual effort of occupational therapists and institutional strategies are needed. This study will use as basic data for the education about infection control aimed at the occupational therapists.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.258-268
• /
• 2018

Purpose: This study systematically examines literatures on the suitability of prostheses and accuracy of obtained impressions to see if digital impressions using intraoral scanners can replace traditional impressions. Materials and methods: A MEDLINE/PubMed search and manual search was performed for studies written in English about accuracy of digital impression published in dental journals from August 1, 1997, to July 31, 2017. Depending on criteria, the data for the selected articles were independently organized into standardized spreadsheets by 2 reviewers. Results: Among the total 35 studies met the inclusion criteria, there were 26 studies comparing the suitability of prostheses, and 9 studies comparing the accuracy of impressions through scan data without prostheses. Most studies used prostheses to compare the accuracy of impression techniques. Conclusion: This review suggests that making single crown or mesio-distally short prostheses with digital impressions is clinically reliable in natural teeth. However, there is still a limit to making mesio-distally long prostheses with digital impressions from the lack of related studies. Digital impression cannot fully replace traditional impressions in implant prostheses yet.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.5
• /
• pp.1-11
• /
• 2020

Increasing the number of unicorn startups has recently received much attention. In this study, we attempt to investigate that startups achieving an extremely high valuation could postpone their exit to raise more investment and receive more benefits. This study tested the hypotheses using data from Crunchbase, World Bank, Global Competitiveness Report, and Global Entrepreneurship Monitor. Using 140 unicorn startups that have already exited through an initial public offering (IPO) or mergers and acquisitions (M&A), we find out that unicorn startups tend to acquire higher valuation as their investment duration increases. Furthermore, we also examined the moderating effects of governmental policy and institutional distance from foreign investors in order to consider the institutional aspects of startups. The results of the moderating variables show significant supports. We expect to provide a better understanding with respect to making an exit decision of unicorn startups. Furthermore, managers and investors need to acknowledge the institutional factors of startups when they decide to fund.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.754-759
• /
• 2015

Nowadays, short distance communication systems with low power energy (LPE) are developed for identification and monitoring of site identification of vessel crews and passengers (SIVCP). LPE communication modules, such as Bluetooth low energy (BLE) and Zigbee, are used for short distance communications with LPE. These modules enable 1:N communications and their popularity is growing since the modules can be mounted on movable objects, such as mobile devices and human body. When these modules are used, the important factor that affects their operation time and design are the capacity and size of battery. Therefore, they must be made as small as possible, and the battery should be selected to be slightly smaller than the module. In this study, we calculate the theoretical life of batteries used in SIVCP BLE modules using data sheet and discharge characteristic graph under the condition of a 1/250 transmission-ratio (TR). We thus calculate experimental life by measuring transmission current for the same TR, and low speed mode current for a 1/5000 TR and measure long-term experimental life using 1/25 TR for days. Through these experiments, we verify experimental methods for the prediction and extension of battery life that would enable us to select appropriate sizes of batteries based on vessel usage and passenger types. The selections of the module TR and battery size are important factors affecting the cost reduction of module design, the battery maintenance, and passenger convenience.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.55-63
• /
• 2010

Although the environmental conflicts regarding noise and vibration are continually increasing during construction, noise and vibration occurring in construction are only managed in construction phase. Noise and Vibration occurring in construction are considered to be insufficient, so we find that noise and vibration management in design phase has to be operated for reducing. The objective of this paper is to present noise and vibration management lists to consider in design phase for enhancing efficiency in noise and vibration management and to develop the appraisal sheets for designers to evaluate and the manuals to easily use management lists. To achieve this, we identify the noise and vibration management lists to consider in design phase through analyzing the previous literatures and confirm the 9 lists through conducting a research with experts in environmental area for verifying the propriety of lists. Also, this study applies to AHP technique to identify the priority and the weight evaluation among the lists. Through this study, we identify the most efficient lists, including from the low noise and low vibration methods, the noise and vibration reduction by blasting works, the installment and the arrangement of noise and vibration control equipments, for noise and vibration management in design phase. The achievement of this study will help to prevent the environmental disputes and conflicts in advance and will consider utilizing for the successful construction project.