• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.419-427
• /
• 2020

This study was undertaken to address the difficulties and inconveniences of an electric wheelchair. We focused on improving usability of initially completed products by augmenting the prototypes designed in the previous study. For evaluation of usability, 10 elderly women aged over 65 years, capable of movements and physical activities in daily life, were enrolled as subjects. The experimental method included a subjective satisfaction questionnaire evaluation of the elderly women using the target product, and the observation evaluation was achieved using video recording data, etc. Usability evaluation revealed that the elevating sector requires improvement of intuition through separation of the elevating control panel and the driving control panel. Improvements in the driving sector include corrections of the front wheel mechanism or driving control algorithm, UI, and sudden stop system. Transferring section assessment revealed a necessity to secure structures and add structures that support power. We believe that based on the inconveniences and improvements presented in the usability evaluation, appending the existing prototype with complementary products will improve the quality of life of elderly women with limited mobility.

• Analytical Science and Technology
• /
• v.29 no.3
• /
• pp.136-141
• /
• 2016

In the present study, the distribution of glass particles inside 10 patrol cars of Chungnam Province has been studied. The target seats were front seats (driver’s seat, passenger’s seat) and the back seat. The target areas were the bottom of the seat (seat contacting buttocks, back of the seat, and the corner of the seat (the bottom and back attached part)). The target areas were tape lifted with an adhesive tape. The glass particles adhering to the adhesive tape were examined and counted under a stereomicroscope. The total number of glass particles found was 679. Among them, 471 (driver’s seat 293, passenger seat 178) were collected from front seats, which are usually occupied by police officers. The majority of glass particles were under 0.49 mm size. The results show that the majority of glass particles can be found on the front seats, rather than on the back seat. There is a high probability that glass particles found on the front seat adhere to police officers, so that to get further transferred to the convict upon physical contact (secondary transfer). Thus, there is a risk of misinterpretation of the value of glass evidence in the course of forensic examinations. Hence, a separate method to prevent cross contamination has to be prepared by police authorities as soon as possible.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.643-651
• /
• 2016

This study considers the value of English-language films as material for learning a foreign tongue using posh discourse. In daily life, when we decline an invitation or convey unpleasant information to a listener, we use polite expressions; we are careful with our words. English language learners need to learn polite expressions in order to interact peacefully with others; doing so can minimize conflict, which is inherent in social relationships. This study uses the British drama Downton Abbey, which is about aristocracy. This study analyzes the posh discourse used in Downton Abbey and insists that students need to learn it explicitly. It is important to learn the polite expressions of this authentic drama in a real classroom. This study suggests that students work in groups to create a short video, and to try to understand the characters' personalities. Movies, TV dramas, and sitcoms provide great content that shows the various functions of the language that students want to learn. As a source of learning material, film can help improve students' motivation and interest in learning a foreign language.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.705-713
• /
• 2018

An automotive ball joint connects the suspension system to the steering system and helps to enable rotational and linear motion between the two elements for steering. This study examines a ball joint used in medium and large-sized pickup trucks. Ball joints consist of a stud, socket, bearing, and plug. The main structural performance metrics of ball joints are the pull-out strength and push-out strength. These structural parameters must meet certain criteria to avoid serious accidents. Test and simulation methods are used to investigate the design requirements, but tests are time-consuming and costly. In this study, we modeled ball joints in SolidWorks and performed a finite element analysis in Abaqus to predict structural performance. The analysis was used to obtain the structural performance required for the static analysis of a 2D axisymmetric model. The uncertainties in the manufacturing of the ball joint were assumed to be the manufacturing tolerances, and the dimensional design variables were identified through case studies. The manufacturing tolerances at each level were defined, and the results were compared with experimental results.

• Current Research on Agriculture and Life Sciences
• /
• v.15
• /
• pp.33-38
• /
• 1997

This investigation was attemped to know fruit quality of apple 'Fuji' grown at three different areas of Taegu. Fruits were gathered from hill side area : Kyungsangpookdo yongchongun chongtongmynn synwonri, flat area : Kyungsangpookdo yongchongun synyoungmyun youujeongri and river side area : Kyungsangpookdo yongchongun kewmhoyeub naenhchundong. Results were as follows: 1. In fruit sampling, we made an effort to select the same size of fruit from all areas, However, the size at river side area was about 40g lighter and minimum length was shorter than those of the other areas. On the other hand, maximum and minimum diameter of the fruit at flat and river side areas were longer than hill side area. Accordingly, shape index of the fruit in river side area was flatter than the other areas. This difference may be due to temperture, soil moisture content, etc. In squeeze rate of the fruit, no significant difference was recognized among areas. 2. Though, rate of fructose in total sugar was almost 50% in all areas, sucrose, fructose and sorbitol concentration of hill side area were higher than the other areas. however glucose was reverse amd brix was almost same as total sugar concentration. 3. Rate of malic acid in total acid was almost 98% and citric acid was only 2% in all areas. Malic acid concentration of hill side area was higher than the other areas and titratable acid concentration was almost same as total acid.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.3
• /
• pp.170-176
• /
• 1984

This study was directed to define the taste compounds of crucian carp, Carassius caressius, free amino acids, nucleotides and their related compounds, organic bases, sugars, organic acids and minerals in the extracts of crucian carp were analyzed, and then followed by sensory evaluation of synthetic extracts prepared from 44 pure chemicals on the basis of the analytical data. Taste panel assessments of synthetic extracts prepared with each extractive component omitted were carried out by a triangle difference test, and changes in taste profile were assessed. In free amino acid composition, histidine was dominant occupying $46\%$ of the total free amino acids. The other abundant free amino acids were glycine, lysine, alanine and taurine. As for the nucleotides, IMP was dominant showing about $80\%$ of the total of nucleotides. The most abundant organic base was total creatinine. The content of betaine was poor and TMAO were trace in content. The main organic acids were succinic, propionic, butyric and valeric acid. Small amount of glucose, fructose and inositol were detected and ribose and arabinose were trace in content $K^+,\;Na^+,\;PO_4^{3-}\;and\;Cl^-$ were found to be the major ions and small amount of $Ca^{++}\;and\;Mg^{2+}$ were deleted. Judging from the results of omission test, the major components which contribute to produce the taste were serine, glutamic acid, lysine, arginine, tyrosine, phenylalanine, IMP, $Na^+,\;K^+\;and\;PO_4^{3-}$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.33-39
• /
• 1984

In order to elucidate the taste compounds of wild eel, Anguilla japonica, free amino acids, nucleotides and their related compounds, organic bases, sugars, organic acids and minerals were analyzed, and then followed by organoleptic test of synthetic extract prepared on the basis of the analytical data. Taste panel assessments of synthetic extracts prepared with each extractive component omitted were carried out by a triangle difference test, and changes in profile were assessed. In free amino acid composition, lysine was dominant occupying $25\%$ of total free amino acid. The other abundant amino acids were glycine, arginine, alanine and histidine. From the results of analysis of nucleotides, IMP was dominant showing about $70\%$ of total nucleotides while ATP, ADP, AMP, inosine and hypoxanthine were low in content. Among organic bases total creatinine was abundant. The amount of betaine was 24 mg/100 g. The main organic acid were butyric acid, valeric acid and succinic acid. As for the sugars, glucose and inositol were 1-2 mg/ 100g in content. $K^+,\;Na^+,\;PO_{4}^{3-}\;and\;Cl^-$ were found to be the major ions. From the results of omission test the major components which contribute to produce the taste were glycine, serine, glutamic acid, IMP, $Na^+,\;K^+,\;Cl^-,\;PO_{4}^{3-}$, lysine, alanine, isoleucine, aspartic acid and creatinine.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.776-782
• /
• 2015

$TiO_2-SnO_2$ nanoparticles with an average diameter of 3~5 nm were synthesized by hydrolysis of titanium tetraisopropoxide (TTIP) and tin chloride to depress the photocatalytic activity of $TiO_2$ nanoparticles. Organic-inorganic hybrid coating solutions were prepared by reacting the $TiO_2-SnO_2$ nanoparticles with 3-glycidoxypropyl trimethoxysilane (GPTMS) by the sol-gel method. The hard coating films with high refractive index were obtained by curing thermally at $120^{\circ}C$ after spin-coating the coating solutions on the polycarbonate (PC) sheets. The coating films from $TiO_2-SnO_2$ nanoparticles showed an improved pencil hardness of 3H compared to 2H of the coating films from $TiO_2$ nanoparticles. Besides, the refractive index of the coating films from $TiO_2-SnO_2$ nanoparticles enhanced from 1.543 to 1.623 at 633 nm as the Sn/Ti molar ratio increased from 0 to 0.5.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.49-55
• /
• 2017

Most motor cases adopt deep drawing products, which are excellent in waterproof functions, concentricity, right angle, and quality. In addition, the blower motor and seat motor, which are installed in the car interior and do not require waterproof function, adopts a multi-forming manufacturing method. The deep drawing process requires an expensive transfer press that can digest approximately 12 processes, such as drawing, trimming and piercing. On the other hand, products can be produced with low investment because the multi-forming method is composed of one multi-forming machine or one multi-forming machine and one press. The multi-forming machine is a high-priced facility that is mostly imported and a bending / shearing process multi-foaming machine, which was developed by domestic small and medium-sized enterprises, is not enough to reduce the production cost. An integral multi - forming machine is used as a limited working method for thin material and small products. A large product and thick material has a high shear load. A large product and thick material has a high shear load and uses a single crank press. After blanking, the worker manually feeds the material to a multi-forming machine. When the bending operation is performed in the multi-forming machine, it is transferred to the press again to calibrate the dimensions. This variance in work processes has resulted in lower cost competitiveness due to the lower productivity, quality issues, and excessive operator input. The aim of this study was to establish a stable and cost - effective production system through bending / shearing process separation and facility automation.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.6
• /
• pp.271-280
• /
• 2017

In this paper, we propose a new safety system composed of wearable devices, driver's seat belt, and integrating controllers. The wearable device and driver's seat belt capture driver's biological information, while the integrating controller analyzes captured signal to alarm the driver or directly control the car appropriately according to the status of the driver. Previous studies regarding driver's safety from driver's seat, steering wheel, or facial camera to capture driver's physiological signal and facial information had difficulties in gathering accurate and continuous signals because the sensors required the upright posture of the driver. Utilizing wearable sensors, however, our proposed system can obtain continuous and highly accurate signals compared to the previous researches. Our advanced wearable apparatus features a sensor that measures the heart rate, skin conductivity, and skin temperature and applies filters to eliminate the noise generated by the automobile. Moreover, the acceleration sensor and the gyro sensor in our wearable device enable the reduction of the measurement errors. Based on the collected bio-signals, the criteria for identifying the driver's condition were presented. The accredited certification body has verified that the devices has the accuracy of the level of medical care. The laboratory test and the real automobile test demonstrate that our proposed system is good for the measurement of the driver's condition.