• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.2
• /
• pp.97-104
• /
• 2004

Neutron induced prompt gamma-ray spectroscopy(NIPS) system measures the prompt gamma-ray emitting by the interaction of a neutron with various materials. This system will be of great benefit to scientists worldwide, since it provides the non-destructive measurement of many element in either solid or liquid wastes. In this study, the full-energy-peak (FEP) efficiency calibration for a HPGe detector was constructed in the ${\gamma}$-ray energy range from 80 keV to 8 MeV, using $^{l33}$Ba and >TEX>$^{152}Eu$ RI sources and $ ^{35}Cl(n, ${\gamma}$)^{36}Cl$ thermal neutron captured reaction. The FEP efficiency curve for the higher energies using the $^{35}Cl(n, ${\gamma}$)^{36}Cl$ reaction was normalized with the curve obtained from the RI sources, since the accurate activity of its prompt ${\gamma}$-ray is unknown. The average thermal neutron flux was theoretically calculated using the FEP efficiency curve for the KCl standard solutions. The NIPS system equipped with a ${\gamma}$-${\gamma}$ coincidence setup with two n-type coaxial HPGe detectors was considered in order to reduce the interfering ${\gamma}$-ray background. The FEP efficiency curve for the ${\gamma}$-${\gamma}$ coincidence system was also obtained for full energy range. The performance of the normal and coincidence NIPS system was tested by comparing signal-to-noise ratio in each mode using the reference sample.e.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.249-254
• /
• 2022

With the rapid advance of the semiconductor and Information and communication technologies, remote environment monitoring technology, which can detect and analyze surrounding environmental conditions with various types of sensors and wireless communication technologies, is also drawing attention. However, since the conventional remote environmental monitoring systems require external power supplies, it causes time and space limitations on comfortable usage. In this study, we proposed the concept of the self-powered remote environmental monitoring system by supplying the power with the levitation-electromagnetic generator (L-EMG), which is rationally designed to effectively harvest biomechanical energy in consideration of the mechanical characteristics of biomechanical energy. In this regard, the proposed L-EMG is designed to effectively respond to the external vibration with the movable center magnet considering the mechanical characteristics of the biomechanical energy, such as relatively low-frequency and high amplitude of vibration. Hence the L-EMG based on the fragile force equilibrium can generate high-quality electrical energy to supply power. Additionally, the environmental detective sensor and wireless transmission module are composed of the micro control unit (MCU) to minimize the required power for electronic device operation by applying the sleep mode, resulting in the extension of operation time. Finally, in order to maximize user convenience, a mobile phone application was built to enable easy monitoring of the surrounding environment. Thus, the proposed concept not only verifies the possibility of establishing the self-powered remote environmental monitoring system using biomechanical energy but further suggests a design guideline.

• Archives of design research
• /
• v.17 no.2
• /
• pp.5-14
• /
• 2004

Introducing human capacities of control and sensation which have been overlooked into Human-Computer Interaction(HCI), Ubiquitous computing, Augmented Reality and others have been researched recently. New vision of HCI has embodied in Tangible User Interface(TUI). TUI allows users to grasp and manipulate bits with everyday physical object and architectural surface and also TUI enables user to be aware of background object at the periphery of human perception using ambient display media such of light, sound, airflow and water movement. Tangibles, physical object which constitutes TUI system, is the physical object embodied digital bit. Tangibles is not only input device but also the configuration of computing. To get feedback of computing result, user controls the system with Tangibles as action and the system represents reaction in response to User's action. User appreciates digital representation (sound, graphic information) and physical representation (form, size, location, direction etc.) for reaction. TUI's characters require the consideration about both user's action and system's reaction. Therefore we have to need the method to be concerned about physical object and interaction which can be combined with action, reaction and feedback.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1036-1043
• /
• 2022

This paper discusses about the development of a visual sensor that can be installed in an automatic mooring device to detect the berthing condition of a vessel. Despite controlling the ship's speed and confirming its location to prevent accidents while berthing a vessel, ship collision occurs at the pier every year, causing great economic and environmental damage. Therefore, it is important to develop a visual system that can quickly obtain the information on the speed and location of the vessel to ensure safety of the berthing vessel. In this study, a visual sensor was developed to observe a ship through an image while berthing, and to properly check the ship's status according to the surrounding environment. To obtain the adequacy of the visual sensor to be developed, the sensor characteristics were analyzed in terms of information provided from the existing sensors, that is, detection range, real-timeness, accuracy, and precision. Based on these analysis data, we developed a 3D visual module that can acquire information on objects in real time by conducting conceptual designs of LiDAR (Light Detection And Ranging) type 3D visual system, driving mechanism, and position and force controller for motion tilting system. Finally, performance evaluation of the control system and scan speed test were executed, and the effectiveness of the developed system was confirmed through experiments.

• Journal of Digital Convergence
• /
• v.18 no.6
• /
• pp.279-285
• /
• 2020

In the era of the Fourth Industrial Revolution, there are many sensors around. People and things are connected to these sensors to the internet. Numerous connected sensors produce the latest data in seconds, and these data are stacked with big data of unimaginable size. Because personal information can be contained in any place of data produced, device and system protection are needed. Digital twins are virtual models that accurately reflect the status information of physical assets and systems that utilize them. The characteristic of digital twin is that digital twin itself has temporal and structural identity enough to represent the object of reality. In the virtual environment the reproduced reality, it continuously simulates and it virtuals of the point of time or the future, the replica can be created. Therefore, this study cited factors threatening personal information in the era of the Fourth Industrial Revolution. And proposed using digital twin technology that can simulate in real-time to overcome the risk of personal information hacking.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.161-167
• /
• 2018

The amount of CNG was measured using a pressure sensor in the case of CNG vehicles. However, the current measurement method causes anxiety to the driver because it is difficult to measure the detailed amount of CNG according to various environmental conditions. This study was performed to measure the amount of CNG in CNG fuel system, and presented the method of measurement by simulating the detection system of CNG. In this experiment, a detection simulator with an ultrasonic sensor in CNG tank of Type-3 was designed, and the reception signal of the ultrasonic sensor was verified by reducing the pressure from 100 bars to 0 bars (increment=5 bars) using compressed air. As a result, the output signal voltage of the ultrasonic sensor decreased as the pressure in the tank decreased, and the it was verified that the shape of the graph was linearity.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.104-109
• /
• 2005

Context-awareness is an important element that can provide service of good quality according to users' surrounding environment and status in ubiquitous computing environment. Information gathering tools for context-awareness use small size mobile devices which have easy movement and a mobile agent in mobile device. Now, Mobile agents are consuming much times and expense to collect and recognize each users' context information. Therefore, needs research about structure for users' context information awareness in early time to reduce mobile agent's load. This paper proposes a P2P mobile agent structure that mikes filtering techniques and a P2P agent in mobile agent. The proposed structure analyzes each user's context information in same area, and groups users who have similar preference degree. Grouped users share information using a P2P mobile agent. Also this structure observes and learns to continue on users' action and service, and measures new interrelation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.81-86
• /
• 2020

With the development of the intelligent Internet of Things AIoT that goes beyond the IoT of the Internet of Things, the industry is changing overall. In addition, with the advent of the 4th Industrial Revolution, revolutionary changes and developments are also taking place in the automobile industry. A representative example is "autonomous driving vehicle". Because the domestic and foreign interests in autonomous vehicles have increased, many developments have been made, and although limited, they have developed into the commercialization stage. However, the structure of the autonomous vehicle that collects, analyzes, and controls data using various sensors installed in the vehicle, not the driver, is often insufficiently exposed to hacking due to the lack of multiplexed devices for security. In this case, as this can be a threat not only to the driver, but also to the surrounding environment, this paper proposes a new data processing function to improve the system security of autonomous vehicles.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.622-624
• /
• 2022

최근 편리성과 경제성 등의 이유로 개인형 이동장치인 전동 킥보드의 사용이 증가하고 있다. 사용자들은 앱으로 주변의 전동 킥보드 위치를 확인한 뒤, 가까운 기기를 찾아 이용한다. 하지만 전동 킥보드의 위치는 GPS로 표시되기 때문에 10 m 이상의 오차가 날 수 있다. 이를 보완하기 위해 (주)올룰로의 킥고잉은 사용자가 전동 킥보드 반납 시 촬영한 전동 킥보드 사진을 GPS 위치 정보와 함께 제공한다. 이 사진을 통해 다음 사용자는 더욱 정확히 전동 킥보드를 찾을 수 있다. 하지만 일부 사용자들은 전동 킥보드가 존재하지 않는 사진을 올리기도 하며, 따라서 사용자들이 촬영한 사진 중 실제 전동 킥보드가 존재하는 사진들만 제공하는 것은 매우 중요하다. 따라서 본 논문은 사용자들이 촬영한 사진 중 실제 전동 킥보드가 존재하는 사진들만 정확히 인식하는 YOLO 기반 시스템을 개발한다. 제안 방법은 (1) 전동 킥보드를 부분별로 탐지하는 기법과 (2) 전동 킥보드를 촬영된 각도에 따라 세분화하여 인식하는 기법을 사용한다. 실제 사용자들이 촬영한 사진을 사용한 실험 결과, 제안 방법은 기존 방법에 비해 더욱 정확히 전동 킥보드 사진을 인식하는 것을 확인하였다.

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.941-950
• /
• 2008

The quality of projector output image is influenced by the surrounding conditions such as the shape and color of screen, and environmental light. Therefore, techniques that ensure desirable image quality, regardless of such surrounding conditions, have been in demand and are being steadily developed. Among the techniques, radiometric compensation is a representative one. In general, radiometric compensation is achieved by measuring the color of the screen and environmental light based on an analysis of camera image of projector output image and then adjusting the color of projector input image in a pixel-wise manner. This process is not time-consuming for small sizes of images but the speed of the process drops linearly with respect to image size. In large sizes of images, therefore, reducing the time required for performing the process becomes a critical problem. Therefore, this paper proposes a fast radiometric compensation method. The method uses color filters for eliminating the color mixing between projector and camera because the speed of radiometric compensation depends mainly on measuring color mixing between projector and camera. By using color filters, there is no need to measure the color mixing. Through experiments, the proposed method improved the compensation speed by 44 percent while maintaining the projector output image quality. This method is expected to be a key technique for widespread use of projectors for large-scale and high-quality display.