• The Korean Journal of Air & Space Law and Policy
• /
• v.8
• /
• pp.231-248
• /
• 1996

이 논문(論文)은 한국(韓國)의 우주(宇宙) 산업(産業) 발달(發達)과 그 과정(過程)을 고찰(考察)하고 현재 진행 중인 통신위성(通信衛星)의 개발(開發)과 그 사업(事業)을 뒷받침해 주는 국가(國家)의 정책(政策)을 살펴보고 있다. KOREASAT라고 명명(命名)된 통신위성(通信衛星) 개발(開發)에 현재 여러 기관이 관계(關係)하고 있으나 그 중 KARI(한국항공우주연구소(韓國航空宇宙硏究所)), ETRI(전자통신연구소(電子通信硏究所)), SERI(시스템공학연구소(硏究所)), KAIST(한국과학기술연구소(韓國科學技術硏究所)) 등이 중추적인 연구(硏究)를 하고 있다. 특히 이 논문(論文)에서는 아래와 같은 문제(問題)를 다루고 있다 첫째, 최근(最近) 한국우주개발(韓國宇宙開發) 상황(狀況) 둘째, 장기(長期) 우주개발(宇宙開發) 계획(計劃) 셋째, 현재(現在) 우주개발(宇宙開發) 상황(狀況)과 미래(未來) 우주개발(宇宙開發)에 관련한 정책(政策)적 문제(問題) 넷째, 한국(韓國) 우주개발(宇宙開發)과 정책(政策) 방향(方向)에 대한 의견(意見) 최근의 한국우주개발(韓國宇宙開發) 상황(狀況)은 크게 한국(韓國)의 통신위성(通信衛星) 사업(事業)인 Koreasat program과 다목적 위성사업(衛星事業)인 KOMSAT로 나타나는데 한국(韓國)의 최초 상업용(商業用) 위성(衛星)인 Koreasat는 1호가 1995년도에 발사(發射)되었으나 정상궤도(正常軌道) 진입(進入)에 문제(問題)가 발생하여 발사업체(發射業體)로부터 보상문제(補償問題)가 제기(提起)되기도 하였으나 2호는 성공리에 발사(發射)되었다. 미국항공우주회사(美國航空宇宙會社)와 공동(共同)으로 개발(開發)중인 새로운 과학위성(科學衛星)인 KOMSAT는 한국우주과학기술(韓國宇宙科學技術)을 한단계 더 발전(發展)시킬 수 있을 것이고 1999년도에 발사(發射) 계획(計劃)이다. 한국항공우주연구소(韓國航空宇宙硏究所) 중심(中心)의 장기(長期) 우주개발(宇宙開發) 계획(計劃)에서 제시(提示)하는 4가지 우주개발(宇宙開發)의 기본목표(基本目標)는 첫째, 우주산업응용산업(宇宙産業應用産業)의 상호협조개발(相互協助開發)에 의한 우주산업(宇宙産業) 육성(育成) 둘째, 한국(韓國)의 현재 우주산업상황(宇宙産業狀況)에 알맞은 특정분야(特定分野)를 선정(選定)하고 이 분야(分野)에서 최단기에 세계(世界) 최고의 기술수준을 성취(成就)하도록 집중(集中) 셋째, 외국과 긴밀한 협조(協助)로 선진기술(先進技術)의 습득(習得) 넷째, 체계적이고 통합(統合)된 장기우주산업발전(長期宇宙産業發展) 계획(計劃) 성립(成立) 등이다. 이러한 계획(計劃)에 주요 사안(事案)으로는 2015년까지 19기의 인공위성(人工衛星) 보유(保有)를 위한 제작계획(製作計劃)과 2010년까지 발사체(發射體) 개발(開發)을 마련하는 것이다 현재 우주활동(宇宙活動)에 관련된 문제(問題)는 주로 Koreasat의 서비스와 사용계획(使用計劃)에 대한 것으로 위성개발사업(衛星開發事業)에 있어서 관련 정부부서간(政府部署間)에 의견(意見)을 달리하고 있는 형태이다. 한국통신(韓國通信)과 정보통신부(情報通信部)는 위성(衛星)의 DBS 트랜스폰더에 대해 디지털 방식(方式)을 적용(適用)할 것을 제안(提案)했지만 공보처(共報處)는 반대(反對)의 입장(立場)을 표명(表明)한 것과 방송국(放送局)의 관리(管理)와 통제(統制)는 공보처(共報處)에 있고 무선통신표준(無線通信標準)에 대한 면허(免許)는 정보통신부(情報通信部)에 있기 때문에 방송국(放送局)에 대한 면허(免許)는 각기 다른 두 단계(段階)로 구성(構成)되는 문제(問題)가 발생(發生)한다. 또한 DBS 서비스에서 사기업(私企業)의 참여(參與)와 관련하여 재벌(財閥)의 참여(參與)를 허용(許容)하느냐의 여부(與否)의 논쟁(論爭)이다. 다음으로 미래(未來) 우주산업개발(宇宙産業開發)에 관한 정책문제(政策問題)를 살펴보면 국가적(國家的) 차원(次元)에서 조직적(組織的)인 육성책(育成策)에 대한 문제(問題)로 현재 주관 부처가 과학기술처(科學技術處)와 통상산업부(通商産業部)로 나뉘어 추진(推進)되고 있다는 점이다. 그리고 차세대(次世代) 통신위성개발(通信衛星開發) 계획(計劃)에 대한 문제(問題)로 최소 2${\sim}$4개의 궤도확보(軌道確保)와 이미 정상궤도(正常軌道) 진입(進入) 실패(失敗)에 따른 Koreasat 1호의 생명단축(生命短縮)으로 새로운 통신위성(通信衛星)을 4년이내에 발사(發射)해야 한다는 문제(問題)이다. 결론적으로 장기(長期) 우주개발계획정책(宇宙開發計劃政策)에 있어서 첫째, 국제적 우주개발사업(宇宙開發事業)에 대한 적극적(積極的) 참여(參與), 둘째, 우주(宇宙)에서 독립적(獨立的)인 활동(活動)을 할 수 있는 국가안보체제(國家安保體制)의 개발(開發), 셋째, 국가(國家) 위상(位相)의 발전(發展)과 우주개발(宇宙開發)을 위한 인력활용(人力活用)의 개발(開發), 넷째, 무한한 우주(宇宙)에 도전(挑戰)할 수 있는 우수(優秀)한 인재(人才)의 교육(敎育), 다섯째, 21세기를 대비(對備)하여 한국(韓國)의 우주개발정책(宇宙開發政策)의 결정(決定) 등이 고려(考慮)되어야 할 5가지 요소(要所)들이다. 그리고 막대(莫大)한 비용(費用)이 드는 우주개발사업(宇宙開發事業)을 효율적으로 추진(推進)하기 위해서는 국가(國家) 최고(最高) 지도자(指導者)의 직접지휘(直接指揮)를 받는 정부기구(政府機構)가 수립(樹立)되어 정부차원(政府次元)에서 추진(推進)하되 산학연(産學硏)이 협조(協助)하여 우주개발계획(宇宙開發計劃)을 추진(推進)하여야 할 것으로 본다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.32-44
• /
• 2001

The purpose of this study was to investigate the effects of Er : YAG laser on cutting efficacy and temperature changes of dentin. We used the dentin specimens of human premolars and molars which contain the physiologic saline and maintain the pulpal pressure in dentinal tubules. Each specimen was exposed to Er : YAG laser with non-contact handpiece type delivery system under different treatment condition of irradiation energy, pulse repetition rate, and exposure time. Two procedures were conducted by the presence of water flow during lasing. The specimens were grouped by thickness of dentin. We investigated the cavity pattern, volume, and temperature change of dentin specimen to determine the cutting efficacy and temperature rise of Er : YAG laser, and obtained following results. 1. Cutting volume of dentin was increased by increasing the irradiation energy, pulse repetition rate, and exposure time(P<0.05). 2. Margins of abulated cavities were sharp and clean and floors of cavities were conical in shape and showing smooth surfaces. Upper diameter of abulated cavities were increasing as laser parameter of irradiation energy, pulse repetition rate, and exposure time were increased. A few cracks were observed on abulated surfaces under treatment condition of laser parameter with 150mJ, 5Hz, and 5sec. 3. Temperature was increased as laser parameter of irradiation energy, pulse repetition rate, and exposure time were increased, and temperature rise was decreased as dentin thickness was increased(P<0.05). 4. Temperature rise was decreased under water flow compared with no water flow during laser exposure(P<0.05). From these results, we think that the method of using a Er:YAG laser would be effective and safe in cutting dentin for clinical application.

• Science of Emotion and Sensibility
• /
• v.16 no.1
• /
• pp.125-132
• /
• 2013

Recently, the consciousness of energy crisis is rapidly growing and sustainable eco-friendly energy sources are becoming issue. Therefore the portable electronic device requires new energy sources for providing continuous power supply and the power energy harvesting system of the human body that enables the power-harvesting research requests anytime, anywhere. One of the sources for energy harvesting is heat energy, which is the difference in temperature of the body and the surrounding environment. We tried to analyze the temperature difference between the environmental temperature and the temperature inside clothing according to the structure of the closed portion. And we examined the temperature difference between the environmental temperature and the temperature inside clothing according to the material of the clothing. The analysis showed that we have been able to get different results at parts of the body in the temperature inside clothing according to the structure of clothing. In upper torso of the chest and back, the temperature inside clothing of 'closed structure' was higher than the temperature inside clothing of 'opened structure'. In the section of arm and leg, it was reduced the difference of temperature inside clothing between 'closed structure' and 'opened structure'. It was particularly noticeable in the section of leg. The results of analysis of the difference between the environmental temperature and the temperature inside clothing according to the material of the clothing, in both cases of the two materials, 'closed structure' was higher than the 'opened structure' in the difference value between the environmental temperature and the temperature inside clothing. There was a difference according to the material in the section of leg. In this study, we outlined the basic guidelines for developing heat energy harvesting clothing by exploring the structure and material of clothing suitable for the heat energy harvesting.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.4
• /
• pp.196-205
• /
• 2011

To investigate the contribution of macroalgae to biogeochemical nutrients and carbon cycles, we measured the uptake rates of nutrients and $CO_2$ and characteristics of fluorescence of Saccharina japonica (Laminaria japonica Areschoug) using an incubation method in an acrylic chamber. From January to May 2011, S.japonica was sampled at Ilkwang, one of well-known macroalgae culture sites around Korea and ranged 46~288 cm long and 4.8~22.0 cm wide of whole thallus. The production rate of dissolved oxygen by S. japonica (n=25) was about $6.9{\pm}5.8{\mu}mol\;g^{-1}$ fresh weight(FW) $h^{-1}$. The uptake rate of total dissolved inorganic carbon ($TCO_2$), calculated by total alkalinity and pH, was $8.9{\pm}7.9{\mu}mol\;g^{-1}\;FW\;h^{-1}$. Mean nutrients uptake were $175.6{\pm}161.1\;nmol\;N\;g^{-1}\;FW\;h^{-1}$ and $12.7{\pm}10.1\;nmol\;P\;g^{-1}\;FW\;h^{-1}$. There were logarithmic relationships between thallus length and uptake rates of nutrients and $CO_2$, which suggested that younger specimens (<100-150 cm) were much more efficient at nutrients and $CO_2$ uptake than old specimens > 150 cm. There was a positive linear correlation ($r^2$=9.4) existed between the dissolved oxygen production rate and the $TCO_2$ uptake rate, suggesting that these two factors may serve as good indicators of S. japonica photosynthesis. There was also positive linear relationship between maximal quantum yield ($F_v/F_m$) and production/uptake rates of dissolved oxygen, $TCO_2$ and phosphate, suggested that $F_v/F_m$ could be used as a good indicator of photosynthetic ability and $TCO_2$ consumption of macroalgae. Maximum relative electron transport rate ($rETR_{max}$) of S. japonica increased as thallus grew and was high in distal part of thallus which may be resulted from the increase of photosynthetic cell density per area. The annual $TCO_2$ uptake by S. japonica in Gijang area was estimated about $1.0\sim1.7{\times}10^3C$ ton, which was about 0.02-0.03% of carbon dioxide emission in Busan City. Thus, more research should be focused on macroalgae-based biogeochemical cycles to evaluate the roles and contributions of macroalgae to the global carbon cycle.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.93-102
• /
• 2016

Purpose: The aim of this study was to evaluate the fit accuracy of two zirconia and titanium abutments in internal hexagonal implants. Materials and methods: One titanium abutment and two zirconia abutments were tested in internal hexagonal implants (TSV, Zimmer). Prefabricated zirconia abutments (ZirAce, Acucera) and customized zirconia abutments milled by the Zirkonzahn system (Zirkonzahn Max, Zirkonzahn) were selected and prefabricated titanium abutments (Hex-Lock, Zimmer) were used as a control. Eight abutments per group were connected to implants with 30 Ncm torque. The marginal gaps at abutment-implant interface, the internal gaps at internal hex, vertical and horizontal gaps between screws and screw seats in abutments were measured after sectioning the embedded specimens using a scanning electron microscope. Data analysis included one-way analysis of variance and the Scheffe test (n=16, ${\alpha}=0.05$). Results: The mean marginal gap of customized zirconia abutment was higher than those of two prefabricated zirconia and titanium abutments. The internal gaps at internal hex showed no significant differences between customized and prefabricated abutments and were higher than those of prefabricated titanium abutments. The mean vertical and horizontal gaps at screw in prefabricated zirconia abutment were higher than those of prefabricated titanium abutment. In the case of customized zirconia abutment, the mean horizontal gap at screw was higher than those of both the prefabricated zirconia and the titanium abutment but the mean vertical gap was not even measureable. The screw seats were clearly formed but did not match with abutment screws in prefabricated zirconia abutments. They were not, however, precisely formed in the case of customized zirconia abutments. Conclusion: Within the limitations of this study, the prefabricated titanium abutments showed better fit than the zirconia abutments, regardless of customized or prefabricated. Also, the customized zirconia abutments showed significantly higher marginal gaps and the fit was less accurate between screws and screw seats than the prefabricated abutments, titanium and zirconia.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.535-543
• /
• 2008

Purpose: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the tooth surface, and conventional resin cement. The effect of phosphoric acid etching prior to application of self-adhesive resin cement on the shear bond strength was also evaluated. Material and methods: Fortyfive non-carious human adult molars extracted within 6 months were embedded in chemically cured acrylic resin. The teeth were ground with a series of SiC-papers ending with 800 grit until the flat dentin surfaces of the teeth were exposed. The teeth were randomly divided into 3 experimental groups. In group 1, self-adhesive resin cement, RelyX Unicem (3M ESPE, Seefeld, Germany) was bonded without any conditioning of teeth. In group 2, RelyX Unicem was bonded to teeth after phosphoric acid etching. For group 3, Syntac Primer (Ivoclar Vivadent AG, Schaan, Liechtenstein) was applied to the teeth before Syntac adhesive (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Helibond (Ivoclar Vivadent AG, Schaan, Liechtenstein) followed by conventional resin cement, Variolink II (Ivoclar Vivadent AG, Schaan, Liechtenstein). To make a shear bond strength test model, a plastic tuble (3 mm diameter, 3 mm height) was applied to the dentin surfaces at a right angle and filled it with respective resin cement, and light-polymerized for 40 seconds. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before test. Universal Testing Machine (Z020, Zwick, Ulm, Germany) at a cross head speed of 1 mm/min was used to evaluate the shear bond strength. The failure sites were inspected under a magnifier and Scanning Electron Microscope. The data was analyzed with One way ANOVA and Scheffe test at ${\alpha}$= 0.05. Results: (1) The shear bond strengths to dentin of RelyX Unicem was not significantly different from those of Variolink II/Syntac. (2) Phosphoric acid etching lowered the shear bond strength of RelyX Unicem significantly. (3) Most of RelyX Unicem and Variolink II showed mixed fractures, while all the specimens of RelyX Unicem with phosphoric acid etching demonstrated adhesive failure between dentin and resin cement. Conclusion: Shear bond strength to dentin of self-adhesive resin cement is not significantly different from conventional resin cement, and phosphoric acid etching decrease the shear bond strength to dentin of self-adhesive resin cement.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.451-461
• /
• 2015

In megavoltage (MV) radiotherapy, delivering the dose to the target volume is important while protecting the surrounding normal tissue. The purpose of this study was to evaluate the modulation transfer function (MTF), the noise power spectrum (NPS), and the detective quantum efficiency (DQE) using an edge block in megavoltage X-ray imaging (MVI). We used an edge block, which consists of tungsten with dimensions of 19 (thickness) ${\times}$ 10 (length) ${\times}$ 1 (width) $cm^3$ and measured the pre-sampling MTF at 6 MV energy. Various radiation therapy (RT) devices such as TrueBeam$^{TM}$ (Varian), BEAMVIEW$^{PLUS}$ (Siemens), iViewGT (Elekta) and Clinac$^{(R)}$iX (Varian) were used. As for MTF results, TrueBeam$^{TM}$(Varian) flattening filter free(FFF) showed the highest values of $0.46mm^{-1}$ and $1.40mm^{-1}$ for MTF 0.5 and 0.1. In NPS, iViewGT (Elekta) showed the lowest noise distribution. In DQE, iViewGT (Elekta) showed the best efficiency at a peak DQE and $1mm^{-1}DQE$ of 0.0026 and 0.00014, respectively. This study could be used not only for traditional QA imaging but also for quantitative MTF, NPS, and DQE measurement for development of an electronic portal imaging device (EPID).

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.312-319
• /
• 2009

Statement of problem: Delamination of veneering porcelain from underlying ceramic substructures has been reported for zirconia-ceramic restorations. Colored zirconia cores for esthetics have been reported that their bond strength with veneered porcelain is weaker compared to white zirconia cores. Purpose: This study aimed to investigate the shear bond strength by manufacturing the veneering porcelain on the colored zirconia core, using the layering technique and heat-pressing technique, and to evaluate the clinical stability by comparing the result of this with that of conventional metal ceramic system. Material and methods: A Metal ceramic (MC) system was tested as a control group. The tested systems were Katana zirconia with CZR (ZB) and Katana Zirconia with NobelRondo Press (ZP). Thirty specimens, 10 for each system and control, were fabricated. Specimen disks, 3 mm high and 12 mm diameter, were fabricated with the lost-wax technique (MC) and the CAD-CAM (ZB and ZP). MC and ZB specimens were prepared using opaque and dentin veneering ceramics, veneered, 3 mm high and 2.8 mm in diameter, over the cores. ZP specimens were prepared using heat pressing ingots, 3 mm high and 2.8mm in diameter. The shear bond strength test was performed in a Shear bond test machine. Load was applied at a cross-head speed of 0.50 mm/min until failure. Mean shear bond strengths (MPa) were analyzed with the One-way ANOVA. After the shear bond test, fracture surfaces were examined by SEM. Results: The mean shear bond strengths (SD) in MPa were MC control 29.14 (2.26); ZB 29.48 (2.30); and ZP 29.51 (2.32). The shear bond strengths of the tested systems were not significantly different (P > .05). All groups presented cohesive and adhesive failures, and showed predominance of cohesive failures in ceramic veneers. Conclusion: 1. The shear bond strengths of the tested groups were not significantly different from the control group (P >.05). 2. There was no significant different between the layering technique and the heat pressing technique in the veneering methods on the colored zirconia core. 3. All groups presented cohesive and adhesive failures, and showed predominance of cohesive failures in ceramic veneers.

• Korean Journal of Optics and Photonics
• /
• v.29 no.3
• /
• pp.110-118
• /
• 2018

We have designed a mid-infrared optical system for an airborne electro-optical targeting system. The mid-IR optical system is a dual-field-of-view (FOV) optics for an airborne electro-optical targeting system. The optics consists of a beam-reducer, a zoom lens group, a relay lens group, a cold stop conjugation optics, and an IR detector. The IR detector is an f/5.3 cooled detector with a resolution of $1280{\times}1024$ square pixels, with a pixel size of $15{\times}15{\mu}m$. The optics provides two stepwise FOVs ($1.50^{\circ}{\times}1.20^{\circ}$ and $5.40^{\circ}{\times}4.23^{\circ}$) by the insertion of two lenses into the zoom lens group. The IR optical system was designed in such a way that the working f-number (f/5.3) of the cold stop internally provided by the IR detector is maintained over the entire FOV when changing the zoom. We performed two analyses to investigate thermal effects on the image quality: athermalization analysis and Narcissus analysis. Athermalization analysis investigated the image focus shift and residual high-order wavefront aberrations as the working temperature changes from $-55^{\circ}C$ to $50^{\circ}C$. We first identified the best compensator for the thermal focus drift, using the Zernike polynomial decomposition method. With the selected compensator, the optics was shown to maintain the on-axis MTF at the Nyquist frequency of the detector over 10%, throughout the temperature range. Narcissus analysis investigated the existence of the thermal ghost images of the cold detector formed by the optics itself, which is quantified by the Narcissus Induced Temperature Difference (NITD). The reported design was shown to have an NITD of less than $1.5^{\circ}C$.

• Korean Security Journal
• /
• no.15
• /
• pp.29-50
• /
• 2008

Many countries throughout the world have enacted laws on terrorism in the light of the changes that time has brought to them, geographical features, cultural values, and environmental elements. Especially some advanced European nations prescribe the definition of terrorism, the purpose of terrorism, the behavior of terrorism, and the types of crimes related to terrorism and so on for the following reason that it is more vital for the authorities concerned to investigate and punish terrorists after the rise of terrorism. In this regard, this paper analyzes legislative countermoves against terrorists of advanced countries such as France, Germany, and England and through this sheds light on the need of future anti-terrorism bills. The legislative basic guidelines directly to manipulate future terrors based on theories derived from this study could be summarized as follows. In the first place, providing laws on direct investigative power and harsher punishment to those involved in terrorism is a prerequisite for social security and thus the presidential directive of the state anti-terrorism action guidelines just deals with administrative measures without any effective response to terrorism. Hence it is urgent to make anti-terrorism bill concerning investigation and punishment of terrorists. In the second place, it is associated with the objectives of terror. The expression "all sorts of" stated in Korean law is so quite unclear that it can not fulfill the required conditions for naming it "crime". Comprehending provisoes of the crime that meets the purpose of the terrorists is necessary in order to investigate and inflict punishment on them. Therefore, it is advisable to establish specific and precise principles such as political, social, ideological, and religious purpose of terrorists in the bill. In the third place, to meet the flow of times of technicalization, informatization, such provisoes as destruction of electronic data system, crimes related to nuclear materials, purchases of weapons by terrorists, tax administration for prohibition of sale, and arson should be considered in terror bill. In the fourth place, nonselective attack toward unspecified individuals has become a serious issue in our society. Terrorists leave poisonous foods or beverages to crowded place or dump toxic chemicals into river intentionally. Therefore more strict regulations must be included in terror bill to prevent possible terrorist attacks.