• NEWSLETTER 전기공업
• /
• no.91-19 s.32
• /
• pp.1-17
• /
• 1991

• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.21-30
• /
• 2013

A hybrid system is a combination of sub systems which have different types of state and time: a typical example is a combination of discrete event and continuous systems. A HDEVS(Hybrid DEVS) formalism was proposed for modeling and analyzing a hybrid system. The HDEVS formalism allows modelers to construct a hierarchical and modular model based on the mathematical set theory. Because the HDEVS formalism was applied to the distributed and interoperated simulators, modelers should make several heterogenous models dividing a target system. Hence, this paper proposes an extended hybrid coupled model of HDEVS formalism and an integrated hybrid modeling methodology in contrast to the existing simulation framework on interoperable simulators. By applying the proposed modeling method, a target system can be translated to a hybrid model in a similar form as the target system. This paper also contains a simulation engine design for the proposed modeling methodlogy and a case study which simulates water tank control systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.14-20
• /
• 2012

CoMP(Coordinated Multi-Point transmission and reception) refers to a cooperative transmission strategy to control the interference from adjacent base stations in cellular mobile communication systems, which efficiently enhances the data throughput of the systems. As the number of the base stations participating in cooperative transmission increases, however, a larger amount of information exchange to carry the CSI(Channel State Information) of the mobile terminals is required. In this paper, we propose a partial CoMP transmission method for systems under the constraint of finite feedback information data. This method selects candidates of base stations which can provide high efficiency gain when they participate in the CoMP set. To achieve this, the cooperative base station combination is constructed by considering the preferred base stations of users. The cooperative base station combinations are dynamically applied since the preferred base station combinations of users may be different. We perform computer simulations to compare performance of the non-CoMP, full-CoMP and partial CoMP in terms of the average throughput using finite feedback and demonstrate the performance improvement of the proposed method.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2769-2779
• /
• 1997

This Paper Proposes an efficient method for improving the training performance of the neural networks using a hybrid of conjugate gradient backpropagation algorithm and dynamic tunneling backpropagation algorithm The conjugate gradient backpropagation algorithm, which is the fast gradient algorithm, is applied for high speed optimization. The dynamic tunneling backpropagation algorithm, which is the deterministic method with tunneling phenomenon, is applied for global optimization. Conversing to the local minima by using the conjugate gradient backpropagation algorithm, the new initial point for escaping the local minima is estimated by dynamic tunneling backpropagation algorithm. The proposed method has been applied to the parity check and the pattern classification. The simulation results show that the performance of proposed method is superior to those of gradient descent backpropagtion algorithm and a hybrid of gradient descent and dynamic tunneling backpropagation algorithm, and the new algorithm converges more often to the global minima than gradient descent backpropagation algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.501-506
• /
• 2010

The proposal set out in this paper, is the Adaptive-MCM(Modulation, Coding and MIMO) system, which results from the combination of adaptive modulation and coding (AMC) and multiple input multiple output (MIMO) schemes. The performance of this system is analyzed through computer simulation. By using the MIMO scheme adaptively as well, the proposed Adaptive-MCM system, presents a better improvement of data rate and error performance compared to the AMC system. The throughput performance of the Adaptive-MCM system is analyzed and compared with the throughput performance of Non-Adaptive-MCM Systems. As a result of the simulation, we can infer that, at a fixed MCM level, there is an improvement of the trade-off between secure Signal to Noise Ratio (SNR) and a high data rate. Consequently, this trade-off improvement results in a better average data rate.

• Journal of Sericultural and Entomological Science
• /
• v.52 no.1
• /
• pp.25-32
• /
• 2014

We produced the transgenic silkworm that expressed the enhanced blue fluorescent protein (EBFP) in the cocoon of silkworms. The EBFP fusion protein, each with N- and C-terminal sequences of the fibroin H-chain, was designed to be secreted into the lumen of the posterior silk glands. The expression of the EBFP/H-chain fusion gene was regulated by the fibroin H-chain promoter. The use of the $3{\times}P3$-driven DsRed2 cDNA as a marker allowed us to rapidly distinguish transgenic silkworm. A mixture of the donor and helper vector was micro-injected into 300 eggs of silkworms, Baegokjam. We obtained 5 broods. The cocoon displayed blue fluorescence, proving that the fusion protein was present in the cocoon. Also, the presence of fusion proteins in cocoons was demonstrated by SDS-PAGE and western blot analysis. Accordingly, we suggest that the EBFP fluorescence silk will enable the production of the silk-based biomaterials.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.313-323
• /
• 2011

Objectives: This study investigated the optimal combination of 3-component photoinitiation system, consisting of CQ, p-octyloxy-phenyl-phenyl iodonium hexafluoroantimonate (OPPI), and 2-dimethylaminoethyl methacrylate (DMAEMA) to increase the degree of conversion of resin monomers, and analyze the effect of the ratio of the photoinitiator to the co-initiator. Materials and Methods: Each photoinitiators (CQ and OPP) and co-initiator (DMAEMA) were mixed in three levels with 0.2 wt.% (low concentration, L), 1.0 wt.% (medium concentration, M), and 2.0 wt.% (high concentration, H). A total of nine groups using the Taguchi method were tested according to the following proportion of components in the photoinitiator system: LLL, LMM, LHH, MLM, MMH, MHL, HLH, HML, HHM. Each monomer was polymerized using a quartz-tungsten-halogen curing unit (Demetron 400, USA) for 5, 20, 40, 60, 300 sec and the degree of conversion (DC) was determined at each exposure time using FTIR. Results: Significant differences were found for DC values in groups. MMH group and HHM group exhibited greater initial DC than the others. No significant difference was found with the ratio of the photoinitiators (CQ, OPPI) to the co-initiator (DMAEMA). The concentrations of CQ didn't affect the DC values, but those of OPPI did strongly. Conclusions: MMH and HHM groups seem to be best ones to get increased DC. MMH group is indicated for bright, translucent color and HHM group is good for dark, opaque colored-resin.

• Journal of Sericultural and Entomological Science
• /
• v.52 no.2
• /
• pp.102-109
• /
• 2014

We constructed the fibroin H-chain expression system to produce enhanced yellow fluorescent proteins (EYFP) in the silk of transgenic silkworm. Fluorescent silk could be made by fusing EYFP cDNA to the heavy chain gene and injecting it into a silkworm. The EYFP fusion protein, each with N- and C-terminal sequences of the fibroin H-chain, was designed to be secreted into the lumen of the posterior silk glands. The expression of the EYFP/H-chain fusion gene was regulated by the fibroin H-chain promoter. The yellow fluorescence proving that the fusion protein was present in the silk. Accordingly, we suggest that the EYFP fluorescence silk will enable the production of novel biomaterial based on the transgenic silk.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.117-124
• /
• 2019

Parallel sparse solvers are essential for solving large-scale finite element models. This paper introduces the combination of iterative and direct solver that can be applied efficiently to problems that require continuous solution for a subtly changing sequence of systems of equations. The iterative-direct sparse solver combination technique, proposed and implemented in the parallel sparse solver package, PARDISO, means that iterative sparse solver is applied for the newly updated linear system, but it uses the direct sparse solver's factorization of previous system matrix as a preconditioner. If the solution does not converge until the preset iterations, the solution will be sought by the direct sparse solver, and the last factorization results will be used as a preconditioner for subsequent updated system of equations. In this study, an improved method that sets the maximum number of iterations dynamically at the first Krylov iteration step is proposed and verified thereby enhancing calculation efficiency by the frequency domain analysis.

• Computational Structural Engineering
• /
• v.12 no.1
• /
• pp.86-94
• /
• 1999

예비구조설계에서는 구조시스템 대안의 생성과 발전, 여러 방법과 대상에 따른 해석과 설계 다양한 요구조건과 구조적 특성을 고려한 여러 구조시스템 대안의 비교 및 선택 과정을 거친다. 그리고, 이러한 각 과정은 구조설계자의 경험적 지식을 바탕으로 하는 종합적인 사고와 판단에 따라서 단계적, 반복적으로 이루어진다. 그러므로, 예비구조설계에서는 정형화된 자료와 작어뿐 아니라 비정형화된 자료와 작업도 처리해야 한다. 따라서, 컴퓨터는 정형화된 자료와 작업을, 구조설계자는 비정형화된 자료와 작업을 직접 처리하고 이를 상호작용을 통하여 교환 및 지시하는 방식, 즉 구조설계자와 컴퓨터의 역할분담에 기초한 상호작용방식을 통하여 예비구조설계에 컴퓨터를 효율적으로 활용할 수 있을 것이다. 구조설계자와 컴퓨터의 역할분담에 기초한 상호작용을 원활히 지원하기 위해서는 구조시스템 대안의 기하학적 향상, 재료에 대한 자료를 효과적으로 제시할 수 있는 3차원 관점, 각 구조시스템 대안을 검토하고 비교하는 사항이 되는 다양한 요구조건에 대한 자료들을 관리하고 제시할수 있는 요구조건 관점이 필요하다. 그리고 예비 구조설계가 진행되어 온 과정, 방향, 설계의도등의 파악을 위한 바탕이 될 수 있는 작업과정관점, 구조시스템 대안 발전 관점이 필요하다. 예비구조설계의 프로세스 조절을 위한 상호작용을 효과적으로 지원하기 위해서는 컴퓨터가 수행 할 수 있는 정형화된 작업들을 예비구조설계의 진행순서인 구조시스템 대안의 생성과 발전, 구조시스템 대안의 해석과 설계, 구조시스템 대안의 선택에 따라서 나열하여 제시할 필요가 있다. 이를 통해서 구조설계자는 자신의 판단에 따라서 다음에 수행해야 할 작업을 결정하고, 그에 해당하는 정형화된 작업을 컴퓨터가 제시한 작업 중에서 선택하고 그 수행을 지시하여 자신의 경험적 지식과 설계의도에 맞추어 예비구조설계의 프로세스를 조절할 수 있다.정조합력은 유의차가 컸으나, 상반조합 능력은 없었다. 교배친의 우성효과는 컸다. 잡종강세 환경변이 및 상가적 작용도 컸다. 우성의 방향은 정의 방향이었으므로 우성귀전자가 크게 작용하였다. 이들 형질들의 귀전자들은 초우성을 나타내었다. 교배친의 자견층중의 우성순서는 잠120>잠114>잠108>잠119>잠118>잠107>잠117>잠113 순이었고, 웅견층중에서는 잠114>잠108>잠120>잠117>잠118>잠107>잠119>잠119>잠113 순이었다. 자견층 비율에서는 광의의 귀전력이 협의의 귀전력보다 컸고, 웅견층 비율에서는 같았다, 견층 비율에서는 일반조합 능력은 크게 나타났으나, 특정조합 능력과 상반조직 능력은 나타나지 않았다. 자견층 비율에서 교배친의 우성효과는 컸다. 자견층 비율에서는 교배친의 우성효과는 적었다. 자웅견층 비율의 잡종 강세는 적게 나타났다. 환경변이와 상가적 작계는 자웅견층 비율에서는 크게 나타났다. 우성의 방향은 자견층 비율에서는 정의 방향으로 우성 귀전자가 크게 작용하였으며, 자견층 비율에서는 정의 방향으로 우성 귀전자가 부분적으로 작용하였다. 교배친의 자견층 비율의 우성순서는 잠117>잠114>잠108>잠120>잠118>잠119>잠107>잠113 순이었고, 자견층 비율에서는 잠114>잠117>잠108>잠118>잠107>잠119>잠113>잠120의 순이었다.지방산의 조성이 많은 차이를 보였다.{2+}$ 26 및 $Na^+$ 26 mg $L^{-1}$이었다. 양액 재배 후 버려지는 폐양액 중의 무기성분 함량은 양액재배에 이용되는 원수에 비해 상당히 높아졌다.료로서 응용 가능성이 있음을 시사한다.약재료인 약초류 등을 이용하였는데 오랫동안 푹 삶아 그물에 곡류 등을 넣어 죽이나 밥으로 조리하였으며 면으로도 조리하였다. 이상과 같이 조선시대 주식류의 종류 및 조리방법에 대한