• 제목/요약/키워드: 시술 각도

검색결과 164건 처리시간 0.403초

A comparative study on bond strength and adhesive failure pattern in bracket bonding with self-etching primer (Self-etching Primer를 이용한 교정용 브라켓 부착시 전단결합강도와 파절양상에 관한 비교연구)

  • Kim, You-Kyoung;Lee, Jin-Woo;Cha, Kyung-Suk
    • The korean journal of orthodontics
    • /
    • 제34권4호
    • /
    • pp.325-332
    • /
    • 2004
  • A self-etching primer that combines the etchant and primer in one chemical compound saves time and should be mote cost-effective to the clinician and patient. The purpose of this study was to evaluate the clinical effectiveness of a self-etching primer by measuring shear bond strengths according to various conditions and observing adhesive failure patterns. For this Investigation, 120 upper and lower premolars extracted for orthodontic purposes were used and randomly divided into six groups of twenty teeth each. Human premolars were embedded in a metal cylinder with orthodontic resin. Metal brackets and ceramic brackets were bonded with XT primer and self-etching primer by means of XT adhesive. Upon curing, plasma arc light and visible light were used. After bonding, the shear bond strength was tested by Instron universal testing machine, and the amount of residual adhesive that remained on the tooth after debonding was measured by stereoscope and assessed with an adhesive remnant index. The results were as fellows: 1. When brackets were bonded, if other conditions remained the same, there was no significant difference in shear bond strength due to the type of primer - either self-etching primer or XT primer. 2. When metal brackets were bonded, there was no significant difference in shear bond strength according to the source of light - plasma arc light or visible light - and type of primer. 3. There was a very significant difference in shear bond strength according to the type of brackets - metal or ceramic brackets. The shear bond strength of ceramic brackets was stronger than metal brackets. 4. When the adhesive failure patterns of metal brackets bonded with self-etching primer were observed by using the adhesive remnant index, the bond failure of the metal bracket occurred more frequently at the bracket-adhesive. The failure of the ceramic bracket, however, occurred more frequently at the enamel-adhesive interface. The adhesive failure patterns of metal brackets bonded with XT primer observed the same patterns. The above results suggest that self-etching primer can be clinically useful for bonding the brackets without fear of a decrease in shear bond strength.

Effects of Colpomenia sinuosa Extract on Serum Lipid Level and Bone Formation in Ovariectomized Rats (불레기말 추출물이 난소를 절제한 갱년기 장애 모델의 혈청 지질 변화 및 골 형성에 미치는 영향)

  • Lee, Juyeong;Kim, Bokyung;Park, Mi-Hwa;Choi, Kyung-Ha;Kong, Changsuk;Lee, Sang-Hyeon;Kim, Yuck Yong;Yu, Ki Hwan;Kim, Mihyang
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • 제45권4호
    • /
    • pp.492-500
    • /
    • 2016
  • In this study, the effects of Colpomenia sinuosa (CS) extract on serum lipid level and bone formation in an ovariectomized animal model were investigated. Twenty four nine-week old female Sprague-Dawley rats were randomly assigned to four groups: sham-operated rats (SHAM), ovariectomized control rats (OVX-CON), and ovariectomized rats supplemented with CS extract at 50 mg/kg bw (OVX-CS50) or 200 mg/kg bw (OVX-CS200). Three OVX groups were surgically ovariectomized while the SHAM group was sham-operated. CS extract was orally administrated at 1 mL per day. Analysis of serum lipid contents found that the total cholesterol, triglyceride, and low density lipoprotein cholesterol levels in the OVX-CON group were higher than those in the SHAM group. Notably, upon administration of CS extract after ovariectomy, triglyceride levels tended to significantly decrease. In addition, platelet aggregation ability decreased in groups treated with CS extract compared to the OVX-CON group. Serum alkaline phosphatase activity as an indicator of bone formation was lower in the CS extract group compared to the OVX-CON group. Collagen contents in bone and cartilage were reduced by ovariectomy, whereas the CS extract-supplemented groups exhibited higher concentrations in bone. According to these results, CS extract improved serum lipid parameters and osteogenesis in ovariectomized rats.

Surgical Treatment of Giant Cell Tumor of the Spine (척추 거대세포종의 수술적 치료)

  • Kang, Yong-Koo;Rhyu, Kee-Won;Rhee, Seung-Koo;Bahk, Won-Jong;Chung, Yang-Guk;Park, Chang-Goo
    • The Journal of the Korean bone and joint tumor society
    • /
    • 제15권2호
    • /
    • pp.138-145
    • /
    • 2009
  • Purpose: Giant cell tumor of the spine is very rare, and the treatment is very difficult. However, surgical techniques and diagnostic modalities are developed, and postoperative functional results are improved. To evaluate the efficacy of total spondylectomy for giant cell tumor of the spine, the clinical results of the surgical treatments for the giant cell tumor of the spine with intralesional curettage or total spondylectomy were evaluated. Materials and Methods: From April 1987 to March 2006, 10 patients who were underwent surgical treatments using total spondylectomy or intralesional curettage were studied. There were 3 men and 7 women. The mean age of the patients was 32 years (range, 25~44 years). The mean duration of follow-up was 8 years (range, 3~15 years). Locations of the tumor were 2 cervical spines, 4 thoracic spines, 2 lumbar spines and 2 sacrum. Initial main symptom of 10 patients was pain, and 7 patients had neurologic impairments too. Four patients were treated with total spodylectomy using anterior and posterior combined approach, 1 patient was treated with total sacrectomy using posterior approach only, and 5 patients were treated with intralesional curettage using anterior approach. Results: Nine patients improved pain and neurologic impairments. Local recurrences developed in 4(40%) patients (2 cervical spines, 1 thoracic spine, 1 sacrum). While a local recurrence developed from 5 total spondylectomy, 3 local recurrences developed from 5 intralesional curettage. Conclusion: Local recurrence rate after surgical treatment with intralesional curettage for the giant cell tumor of the spine was very high. Total spondylectomy using anterior and posterior approach is advisable to prevent the local recurrence after surgical treatment.

  • PDF

Results of Surgical Management in Patients with Cardiac and Arterial Manifestations of Behcet's Syndrome (심장 및 동맥계를 침범한 베체트씨 증후군 환자의 수술 후 결과)

  • 원종윤;장병철;이도연;박상준
    • Journal of Chest Surgery
    • /
    • 제35권1호
    • /
    • pp.36-42
    • /
    • 2002
  • Background: To evaluate the efficiency of surgical treatment in patients with cardiac valvular and arterial involvement of Behcet's syndrome. Material and Method: 12 patients underwent surgical treatment due to the valvular heart diseases and the various arterial diseases associated with Behest's syndrome over 7 years; 6 with valvular heart disease, 1 with annuloaortic ectasia, 1 with ascending aortic aneurysm, 4 with pseudoaneurysms in abdominal aorta(n=2), carotid artery(n=1), and popliteal artery(n=1). All 12 patients had received valvular replacement(n=6) and the artificial(n=5) or autologous(n=1) graft interposition. We followed the results of these surgical treatments. Result: Operations were technically successful in all 12 patients and peri-operative complication was not demonstrated. However, 10 patients had recurrences; 6 with valvular dehiscence, 3 with pseudoaneurysm at anastostomosis site, and 1 with aorto-duodenal fistula. The duration of recurrence was 1 to 55 months(mean: 15.7$\pm$ 16.2 months). 7 patients underwent the second operation and among them, 4 patients showed repeated recurrences. Overall, 5 patients died 2 to 25 months after the operation(mean: 13.6 months), because of the bleeding at the anastomosis site Five patients did not present recurrence after the first(n=2) or the second operation(n=3) and their follow up duration was 5 to 60 months(mean: 45.8$\pm$41.7 months). Five patients received immune-suppressive therapy after the first(n=2) and second operation(n=3). Three did not shown recurrence for the 13, 29 and 33 months. Conclusion: Post-operative prognosis of arterial manifestation of Behcet's syndrome was not encouraging and if possible, other treatment strategy should be considered.

Relationship between FSH Receptor Genotype and Clinical Outcomes of IVF-ET in Infertile Korean Women (한국 불임 여성에서 난포자극호르몬 수용체 유전자형과 체외수정 및 배아이식술 임상 결과와의 관련성)

  • Moon, Mi-Hye;Choi, Hye-Won;Kim, Min-Jee;Lee, Hyoung-Song;Cha, Sun-Hwa;Song, In-Ok;Koong, Mi-Kyoung;Jun, Jin-Hyun
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제35권1호
    • /
    • pp.69-76
    • /
    • 2008
  • Objective: The purposes of this study were to determine the distribution of follicle-stimulating hormone receptor (FSHR) genotypes in infertile Korean women and to evaluate the relationship between FSHR genotypes and clinical outcomes of IVF-ET cycles. Methods: Genomic DNA was extracted from peripheral blood in 1, 020 of infertile Korean women. Genotypes of FSHR at Thr307Ala (T/A) and Asn680Ser (N/S) were screened by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis. Clinical outcomes related to the genotypes of FSHR were evaluated in IVF-ET cycles (n=302) with controlled ovarian hyperstimulation (COH) of infertile women under 40 years old. Results: In a population of 1, 020 infertile Korean women, the frequency of TT/NN, TA/NS and AA/SS for the major variant Thr307Ala and Asn680Ser was 44.80%, 41.96% and 10.49%, respectively. There was no significant difference in characteristics of ovarian response and clinical pregnancy rate among the major genotypes of FSHR in IVF-ET cycles with COH. However, implantation rate of AA/SS patients was significantly higher than that of TT/NN patients (24.5% vs 15.7%, p<0.05). Conclusion: This study showed that FSHR genotype was not directly associated with ovarian response in IVF-ET cycles with COH. The relationship between clinical outcomes and FSHR genotypes of patients should be substantiated by further studies.

Medico-Surgical Cooperative Treatment of Pulmonary Atresia with Intact Ventricular Septum (심실중격 결손이 없는 폐동맥 폐쇄의 내과-외과적 협동치료)

  • Kim, Kyeong Sik;Kweon, Byeong Chul;Lee, Jong Kyun;Choi, Jae Young;Sul, Jun Hee;Lee, Sung Kyu;Park, Young Whan;Cho, Bum Koo
    • Clinical and Experimental Pediatrics
    • /
    • 제46권3호
    • /
    • pp.250-258
    • /
    • 2003
  • Purpose : The actual clinical examples of co-appliance of catheter intervention with surgical procedures in the treatment of pulmonary atresia with an intact ventricular septum(PA/IVS) which we have experienced in our institution are here shown, and the anatomical and hemodynamical profiles between each method is compared. Methods : Medical records of 33 patients with PA/IVS who underwent various treatment from January, 1995 to December, 2000 were reviewed for a retrograde study. Results : In three out of 10 patients who underwent percutaneous balloon pulmonary valvotomy (PPV), residual pulmonary stenosis were observed in their out patient department(OPD) follow-ups, eventually necessitatig balloon pulmonary valvuloplasty(BPV). One out of three patients exhibited deterioration of tricuspid regurgitation after BPV, requiring surgical tricuspid annuloplasty(TAP). Two out of the seven patients who received primarily surgical right ventricle outlet tract(RVOT) repair without any systemic-pulmonary shunt or intervention needed additional intervention employing cardiac catheterization after operation. Two patients received interventional catheterization before surgical RVOT repair. In five out of 11 cases of Fontan type operation, coil embolization of collateral circulation was done before total cavo-pulmonary connection(TCPC), and in three cases, interventional catheterization was needed after TCPC. Conclusion : Both medical and surgical treatment modalities are widely used in management of PA/IVS patients, and recent results prove that medico-surgical cooperative treatment is essential.

Learning Curve of a Laparoscopy Assisted Distal Gastrectomy for a Surgeon Expert in Performing a Conventional Open Gastrectomy (개복 위절제술에 경험이 풍부한 술자에 의한 복강경 보조하 원위부 위절제술의 Learning Curve)

  • Kim, Ji-Hoon;Jung, Young-Soo;Jung, Oh;Lim, Jeong-Taek;Yook, Jeong-Hwan;Oh, Sung-Tae;Park, Kun-Choon;Kim, Byung-Sik
    • Journal of Gastric Cancer
    • /
    • 제6권3호
    • /
    • pp.167-172
    • /
    • 2006
  • Purpose: The laparoscopy assisted gastrectomy has been increasingly reported as the treatment of choice for early gastric cancer. However, expert surgeons, who have performed a conventional open gastrectomy for a long time, tend to have a negative attitude toward laparoscopic procedures. The aim of this study was to determine the learning curve of a laparoscopy assisted distal gastrectomy (LADG) for a surgeon expert in performing an open gastrectomy and to analyze the factors that have an effect on a LADG. Materials and Methods: Between April 2005 and March 2006, 62 patients underwent a LADG with D1+beta lymph-node dissection. The 62 patients were divided into 10 sequential groups with 6 cases in each group (the last group was 8 cases), and the time required to reach the plateau of the learning curve was determined by examining the average operative times of these 10 groups. Other factors, such as sex, BMI, complications, transfusion requirements, the number of retrieved lymph nodes, and change of postoperative hemoglobin level, were also analyzed. Results: With the $5^{th}$ group (after 30 cases), the operative time reached a plateau (average: 170 min/operation). The differences between before the $30^{th}$ case and after the $31^{st}$ case with respect to changes in the postoperative hemoglobin level, the number of retrieved lymph nodes, the transfusion requirements, and the complications rate were not significant. Conclusion: According to an analysis of the operative time, experience with 30 LADGs in patients with early gastric cancer is the point at which the plateau of the learning curve (7 months) is reached. Abundant experience with a conventional open gastrectomy and a well-organized laparoscopic surgery team are important factors in overcoming the learning curie earlier.

  • PDF

COMPARISON OF MICROLEAKAGE IN SEALANT REPAIRED WITH DIFFERENT SURFACE TREATMENT (파손된 치면열구전색제의 수리 방법에 따른 미세누출 비교)

  • Kang, Myung-Bong;Hyun, Hong-Keun;Kim, Young-Jae;Kim, Jung-Wook;Jang, Ki-Taek;Lee, Sang-Hoon;Hahn, Se-Hyun;Kim, Chong-Chul
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • 제34권2호
    • /
    • pp.204-214
    • /
    • 2007
  • The aim of this study was to investigate whether differences in surface treatment prior to repair influenced the seal of a resin fissure sealant placed on the occlusal surfaces of permanent molar teeth. One hundred and twenty extracted human molars were selected and a light curing sealant was placed on their occlusal surface following cleaning by prophylaxis and acid etching. The teeth were deliberately damaged, and then stored in artificial saliva for four weeks. Sixty teeth with the desired morphology of sealant failure were randomly divided into four groups where one group was treated with only etching agent, another by only air-abrasion, another by applying an etching agent followed by a bonding agent, and the last by air-abrasion followed by a bonding agent each. After sealant application, the samples were thermocycled and the degree of microleakage was determined. The results were as follows : 1. In the sealant/sealant interface group 2(0.22), 4(0.23) using air-abrasion showed a significantly lower microleakage score than group 1(0.38), 3(0.35) using an etching agent(p<0.05). There were no statistically significant differences(p>0.05) between groups 1, 2 and groups 3, 4. 2. In the sealant/tooth interface, group 3(0.20), 4(0.20) which used a bonding agent showed a significantly lower microleakage score than group 1(0.35), 2(0.40) (p<0.05). There were no statistically significant differences(p>0.05) between groups 1, 3 and groups 2, 4. 3. In SEM examination, while sealant surfaces treated with etching did not result in highly rough surfaces, those treated with air-abrasion did show rough surfaces.

  • PDF

Evaluation of Microhardness of Bulk-base Composite Resins According to the Depth of Cure (Bulk-base 복합 레진의 중합 깊이에 따른 미세경도 평가)

  • No, Yoomi;Shin, Bisol;Kim, Jongsoo;Yoo, Seunghoon
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • 제44권3호
    • /
    • pp.335-340
    • /
    • 2017
  • Composite resin becomes an essential material in pediatric dentistry. However, incremental filling of composite resin to minimize the polymerization shrinkage takes time. To reduce the polymerization shrinkage, clinicians and researchers have focused on bulk-filling materials. Bulk-base composite resin is newly introduced as bulk-filling composite resin. The purpose of this study was to evaluate microhardness profile of bulk-base composite resin according to the depth of cure. A high flow bulk-base material and a low flow bulk-base material were used for experimental group, and a conventional composite resin was used for control group. Each group consist of 20 specimens, $3.5{\times}3.5{\times}5.0mm$ mold was used to make specimen. Specimens were sectioned at the 2 mm and the 3 mm depth with milling machine. Microhardness profile was measured at the surface, 2 mm depth, 3 mm depth, and 4 mm depth. Microhardness of control group showed statistically significant difference (p < 0.05) according to the polymerization depth. In contrast, experimental group showed no statistically significant difference, except between 0 mm and 4 mm at HFB, 0 mm and 2 mm, 0 mm and 3 mm at MFB. At the surface and the 2 mm depth, the control group showed higher microhardness than the experimental groups (p < 0.05). However, at the 4 mm depth, the experimental groups showed significantly higher microhardness (p < 0.05). The results from this study, the bulk-base composite resin showed higher microhardness at the 4 mm and lower microhardness at the surface and the 2 mm depth. Therefore, if bulk-base resin overcomes the mechanical weakness, it could be considered using in pediatric dentistry.

Evaluating the Impact of Attenuation Correction Difference According to the Lipiodol in PET/CT after TACE (간동맥 화학 색전술에 사용하는 Lipiodol에 의한 감쇠 오차가 PET/CT검사에서 영상에 미치는 영향 평가)

  • Cha, Eun Sun;Hong, Gun chul;Park, Hoon;Choi, Choon Ki;Seok, Jae Dong
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • 제17권1호
    • /
    • pp.67-70
    • /
    • 2013
  • Purpose: Surge in patients with hepatocellular carcinoma, hepatic artery chemical embolization is one of the effective interventional procedures. The PET/CT examination plays an important role in determining the presence of residual cancer cells and metastasis, and prognosis after embolization. The other hand, the hepatic artery chemical embolization of embolic material used lipiodol produced artifacts in the PET/CT examination, and these artifacts results in quantitative evaluation influence. This study, the radioactivity density and the percentage error was evaluated by the extent of the impact of lipiodol in the image of PET/CT. Materials and Methods: 1994 NEMA Phantom was acquired for 2 minutes and 30 seconds per bed after the Teflon, water and lipiodol filled, and these three inserts into the enough to mix the rest behind radioactive injection with $20{\pm}10MBq$. Phantom reconfigure with the iterative reconstruction method the number of iterations for two times by law, a subset of 20 errors. We set up region of interest at each area of the Teflon, water, lipiodol, insert artifact occurs between regions, and background and it was calculated and compared by the radioactivity density(kBq/ml) and the% Difference. Results: Radioactivity density of the each region of interest area with the teflon, water, lipiodol, insert artifact occurs between regions, background activity was $0.09{\pm}0.04$, $0.40{\pm}0.17$, $1.55{\pm}0.75$, $2.5{\pm}1.09$, $2.65{\pm}1.16 kBq/ml$ (P <0.05) and it was statistically significant results. Percentage error of lipiodol in each area was 118%, compared to the water compared with the background activity 52%, compared with a teflon was 180% of the difference. Conclusion: We found that the error due to under the influence of the attenuation correction when PET/CT scans after lipiodol injection performed, and the radioactivity density is higher than compared to other implants, lower than background. Applying the nonattenuation correction images, and after hepatic artery chemical embolization who underwent PET/CT imaging so that the test should be take the consideration to the extent of the impact of lipiodol be.

  • PDF