• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.989-1002
• /
• 2018

Grouting for the rock joint is to strengthen the rock strata by infiltrating cement grout materials into the rock joints. Grouting is one of a field of study which is difficult to develop deterministic and quantitative design approach because of multiphase behaviors of grout materials and 3 dimensional features of rock joints. Therefore, GIN (Grouting Intensity Number) can be a good index with appropriate monitoring of pressure and volume of grout. In this paper, we investigate the effects of joint roughness (JRC) and rheology of cement material during the infiltration of cement grout material into rock joint through CFD (computational fluid dynamics) analyses. With rough joint surface and increase of WC ratio, the frictional resistance during the grouting increases. The results have been summarized with polynomial correlations.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.3
• /
• pp.219-229
• /
• 2014

The experiment and FE analysis of ultimate behavior of GFRP cylindrical shell structure stiffened by steel pipe ring instead of rectangular cross-section ring was presented. Four kinds of test models were designed and flexural failure experiment was performed to investigate ultimate behavior characteristic according to the size of cross section of steel pipe ring and diameter of GFRP shell. Material properties of specimens were experimented by bending, tensile and compressive test. Displacements and strains were measured to evaluate failure behavior of steel pipe ring and GFRP shell structure. The experimental results were compared with the FEA results by commercial program ABAQUS. It is observed that GFRP shell structure stiffened by steel ring have enough ductility to bending failure, and an increase of bending rigidity of steel ring is very effective to increase of failure strength of GFRP shell structure.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.6
• /
• pp.599-608
• /
• 2010

Steel trusses that act compositely with concrete slabs have proven to be an economical system for long-span floors. The composite action is generally achieved by providing shear connections between the steel top chord and the concrete topping. The composite sections have greater stiffness than the sum of the individual stiffnesses of the slab and truss. Therefore, steel trusses that act compositely with concrete slabs can carry larger loads and are stifferand less prone to transient vibration. During the tests that were performed in this study, the crack pattern and deflection of the beam of the composte truss were investigated. The test results were compared with the results for the noncomposite trusses.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.469-469
• /
• 2015

산업혁명 이후 인간사회의 산업화 및 도시화의 가속으로 지구온난화는 기후변화를 야기해 왔으며, 이로 인한 각종 부정적인 영향과 심각성은 날로 커져가고 있는 현실이다. IPCC(Intergoverment Panel on Climate Change)는 기후변화의 주범인 온실가스를 감축할 지라도 기후의 탄성 때문에 앞으로 수세기 이상 계속 진행될 것으로 전망하였으며, 기후변화 영향의 근원적 방지는 불가능하기 때문에 결국 수자원 관리 측면에서도 기후변화에 적응하기 위한 각종 적응전략 개발의 필요성을 강조하였다(IPCC, 2007). 또한, 극한강수의 발현비율이 도시 및 비도시 지역의 구분 없이 과거 30년에 비해 크게 증가하고 있으며 이러한 추세는 수공구조물의 치수안전도 저하에 큰 영향을 준다. 우리나라는 그동안 하천, 유역 홍수저감 시설물과 댐 등 대형 수공구조물에 대한 안전성 평가를 주기적으로 수행해 왔으나 단순히 모니터링을 통하여 현재의 안전기준의 부합 여부만을 판단하는 수준에 그치고 있다. 장래 증가하는 홍수피해에 대처하기 위해서는 다양한 극한강우 및 극한홍수시나리오를 기반으로 시설물 설계기준별 홍수 위험도와 취약성을 평가하고, 극한홍수 방어기준을 재설정하여 현재 설계기준을 제고할 필요가 있으며, 시설물별 안전도 평가와 위험도 저감계획 및 경제성 평가를 종합적으로 고려한 실행프레임워크 개발이 시급한 실정이다. 따라서 본 연구에서는 도림천 유역에 대하여 최적화된 도시유출모형을 통하여 기후변화가 도시유역에 미치는 유출영향을 분석하였으며, MCS(Monte Carlo Simulation)을 통한 극치수문사상의 적용 및 유출분석을 통한 하천제방의 취약성 평가와 위험도 분석을 실시하여 도시하천의 기후변화 영향을 정량적으로 표현하고자 하였다. 또한 기후변화에 따른 도시하천의 수문특성 변화분석 결과를 바탕으로 향후 발생할 수 있는 극치 수문사상의 값을 반영한 설계기준 강화 수방시설 계획 등의 연구에 활용하며, 여러 가지 수문학적 불확실성에 의하여 가변 가능한 도시하천 유역의 취약성 평가 및 위험도 분석을 통한 기후변화 대응과 수공구조물 설계 및 수방전략 수립에 활용하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.231-231
• /
• 2016

산업혁명 이후 인간사회의 산업화 및 도시화의 가속으로 지구온난화는 기후변화를 야기해 왔으며, 이로 인한 각종 부정적인 영향과 심각성은 날로 커져가고 있는 현실이다. IPCC(Intergoverment Panel on Climate Change)는 기후변화의 주범인 온실가스를 감축할 지라도 기후의 탄성 때문에 앞으로 수세기 이상 계속 진행될 것으로 전망하였으며, 기후변화 영향의 근원적 방지는 불가능하기 때문에 결국 수자원 관리 측면에서도 기후변화에 적응하기 위한 각종 적응전략 개발의 필요성을 강조하였다(IPCC, 2007). 또한, 극한강수의 발현비율이 도시 및 비도시 지역의 구분 없이 과거 30년에 비해 크게 증가하고 있으며 이러한 추세는 수공구조물의 치수안전도 저하에 큰 영향을 준다. 우리나라는 그동안 하천, 유역 홍수저감 시설물과 댐 등 대형 수공구조물에 대한 안전성 평가를 주기적으로 수행해 왔으나 단순히 모니터링을 통하여 현재의 안전기준의 부합 여부만을 판단하는 수준에 그치고 있다. 장래 증가하는 홍수피해에 대처하기 위해서는 다양한 극한강우 및 극한홍수시나리오를 기반으로 시설물 설계기준별 홍수 위험도와 취약성을 평가하고, 극한홍수 방어기준을 재설정하여 현재 설계기준을 제고할 필요가 있으며, 시설물별 안전도 평가와 위험도 저감계획 및 경제성 평가를 종합적으로 고려한 실행프레임워크 개발이 시급한 실정이다. 따라서 본 연구에서는 SEEP/W 모형을 이용하여 일반적인 하천 제방을 바탕으로 침투해석을 실시하여 그 결과를 이용하여 안정성 평가에 대하여 검토하였다. 또한 기후변화에 따른 도시하천의 수문특성 변화분석 결과를 바탕으로 향후 발생할 수 있는 극치 수문사상의 값을 반영한 설계기준 강화 수방시설 계획 등의 연구에 활용하며, 여러 가지 수문학적 불확실성에 의하여 가변 가능한 도시하천 유역의 취약성 평가 및 위험도 분석을 통한 기후변화 대응과 수공구조물 설계 및 수방전략 수립에 활용하고자 한다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.162-176
• /
• 2016

The experience and play activities in forest spaces have played an effective role in children's growth and development, therefore, many studies and projects related to forest activity space have progressed actively. However, the focus of previous research has been merely on the effectiveness of forest activity but little on providing the basis for the spatial design of these types of forest activity spaces. Thus, this study aims to identify the relationship between children's developmental play activity and the physical characteristics of forest activity spaces for evidence-based design. First of all, indicators for Cognitive-Social play(CSP) was selected and forest spaces were categorize into play facility spaces and forest spaces. More detailed environmental characteristics of each space were 'play area' and 'paving materials' for play facilities and 'density of tree and shrub', 'slope', 'paving materials' and 'fixing and type of natural loose parts' for forest space. Through environmental inventory and behavior observation, the types of play behaviors and the occurrence frequency of children aged four to five were collected and analyzed. The results were as follows: 1) In play facility spaces, play behaviors occurred at a high frequency at the facility playground with play facilities and sand area. In terms of CSP, functional-solitary and functional-parallel plays occurred predominantly. 2) In forest spaces, various play behaviors occurred at high frequency in the environment with low density planting and various natural loose parts. For CSP, functional-group and symbolic-group plays occurred at a high frequency. 3) Symbolic-group play appeared to be highly affected by environmental characteristics like tree area of scatter density or less, 10~20 degree slope, and the presence of fixed large stumps. In conclusion, this study provides standards of physical environmental characteristics for forest activity space design through direct observation and analysis of children's play behaviors.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.35-43
• /
• 2015

It is important to have enough design and construction duration for infrastructure projects. However, recent water resource project in Korea shows several problems caused by their fast-tract schedule. National Audit Committee report several water resource projects have quality problems caused by insufficient project duration. Especially, water resource projects such as dam and water pipeline construction should have proper time to secure their structure quality. Normal project duration for these projects should be estimated based on previous similar projects' historical data analysis. However there is no standard model which can estimate normal project duration for water resource projects in Korea. There are several normal project duration estimation models for building project developed by public(LH) and private construction companies. However, there is no proper model for water resource projects. So, this study developed normal project duration model for dam and water pipeline projects using historical data and show application of models.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.2
• /
• pp.107-119
• /
• 2014

The worldwide Status-of-Art survey for the in-situ experiments of the engineered barrier system for HLW underground disposal was performed as a preliminary action for the design of the in-situ demonstration at KURT. Some nations, which have executed or is ongoing the in-situ experiments at their underground research facilities, were summarized in this review. The demonstration projects reviewed were TBT/Sweden-France, LOT/Sweden, HE-E/Switzerland, PRACLAY/Belgium, FEBEX/Spain, HORONOBE/Japan, and BCE/Canada. The investigated items for the projects were mainly their purposes, constitutional structures, test conditions, monitoring parameters and the measuring tools, and test results. In this review, the hardware design and the assembling of the test system were more concentrated rather than their experimental results, because the purpose of this review is to achieve the necessary information for the practical design of the in-situ experiment to be installed at KURT. A mid scale in-situ demonstration of EBS at KURT, that is called IN-DBES, will be launched right after the completion the expanding project of KURT in 2015. It is hoped that the structural design, installing methods, hardware equipments required in the establishment of IN-DEBS will be referred on this review.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.435-445
• /
• 2007

Ship structures are thin-walled structures and lots of cutouts, for example, of inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed. In the present paper, we investigated several kinds of perforated stiffened model from actual ship structure and series of elasto-plastic large deflection analyses were performed to investigate into the influence of perforation on the buckling and ultimate strength of the perforated stiffened plate varying the cutout ratio, web height, thickness and type of cross-section by commercial FEA program(ANSYS). Closed-form formulas for predicting the ultimate strength of the perforated stiffened plate are empirically derived by curve fitting based on the Finite Element Analysis results. These formulas are used to evaluate the ultimate strength, which showed good correlation with FEM results. These results will be useful for evaluating the ultimate strength of the perforated stiffened plate in the preliminary design.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.57-63
• /
• 2023

The external weather conditions including temperature and wind speed in the Saemangeum reclaimed land is different from that of the inland, affecting the internal environment of the greenhouse. Therefore, it is important to select an appropriate covering material considering the insulation effect according to the type and characteristics of the covering material considering the weather condition in the Saemangeum reclaimed land. A hexahedral insulation chamber was designed to evaluate the insulation efficiency of each glass-clad material in the outside weather condition in reclaimed land. In order to evaluate the insulation effect of each covering material, a radiator was installed and real-time power consumption was monitored. 16-mm PC (polycarbonate), 16-mm PMMA (polymethyl methacrylate), 4-mm greenhouse glass, and 16-mm double-layered glass were used as the covering materials of the chamber. In order to understand the effect of the external wind directions, the windward and downwind insulation properties were evaluated. As a result of comparing the thermal insulation effect of each greenhouse cover material to single-layer glass, the thermal insulation effect of double-layer glass was 16.9% higher, while PMMA and PC were 62.5% and 131.2% higher respectively. On average the wind speed on the windward side was 53.1% higher than that on the lee-wind side, and the temperature difference between the inside and outside of the chamber at the wind ward side was found to be 52.0% larger than that on the lee ward side. During the experiment period, the overall heating operation time for PC was 39.2% lower compared to other insulation materials. Showing highest energy efficiency, and compared to PC, single-layer glass power consumption was 37.4% higher.