• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.136-138
• /
• 2008

본 논문에서는 전기자전거에 응용할 수 있는 BLDC 전동기의 구동제어시스템을 설계하였으며, 시뮬링크를 이용한 시뮬레이션을 통해 BLDC 전동기와 그 구동제어시스템의 특성파악을 수행 하였다, 모터 컨트롤 전용 16비트 마이크로컨트롤러인 dsPIC30F3010을 탑제하여 시스템을 설계하였으며, 2상 여자 제어법을 적용하여 6-스텝 인버터를 구동하고, PID 연산을 수행, 속도제어 방법을 통하여 전기자전거에 사용할 수 있는 BLDC 전동기의 구동제어시스템을 구현 하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.321-323
• /
• 2008

This study suggests a modeling of grid-connected wind turbine generation systems and performs simulation according to increase/decrease of real wind speed. MATLAB/Simulink implemented modeling of grid-connected wind turbine generation system. Terminal voltage, grid voltage, and active/reactive power shall be observed following the performance of simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1171-1178
• /
• 2011

This paper shows the robust design results of an actuator, a kind of dynamic system. Variations in the components comprising the actuator cause uncertainties in the system's dynamic performance. Therefore, a probabilistic design method is applied to ensure robust actuator performance to component variation. A Simulink model for the actuator was built using transfer functions for the components. The dynamic responses of the actuator were evaluated using the Simulink model. Performance indexes were approximated as quadratic functions of the design parameters through the application of the response surface methodology (RSM) with the Simulink model. Then, a probabilistic design method was applied to the approximated performance indexes to obtain optimal design parameters that would provide robust actuator performance. The optimal design was compared to the present design in terms of the performance indexes and dynamic response characteristics over time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1555-1560
• /
• 2013

The Column type Motor Driven Power Steering(CMDPS) systems are generally equipped among passenger vehicles ensuring better vehicle safety and fuel economy. In general to analyze systems and to develop a controller a full vehicle model from CarSim developed by Mechanical Simulation Incorporation interacting with MDPS control algorithm from Matlab Simulink was concurrently simulated. This paper describes the development of concurrent simulation technique in detail for analyzing Matlab Simulink MDPS control system with a dynamic vehicle system because the specific method has not been revealed in detail. The steering wheel angle input was evaluated and well compared with proving ground experimental data. The comparisons from concurrent simulation show an effective way to develop and validate the control algorithm. This concurrent simulation capability will be efficiently used for CMDPS performance evaluation and logic tuning as well as for vehicle handling performance.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2255-2260
• /
• 2007

This Paper focuses on modeling and simulation to analyze the characteristic of hybrid vehicle. The system includes proton exchange membrane fuel cell(PEMFC), photovoltaic generator(PV), lead-acid battery, motor, vehicle and controller. Main electricity is produced by the PEMFC and battery to meet the requirements of a user load. When vehicle is parked in a sunny place, extra power is generated by the photovotaics and is charged in a battery for next drive. Further we evaluate usefulness of this hybrid vehicle by using ADVISOR - the advanced vehicle simulator written in the Matlab/Simulink environment. According to simulation results, the extra power obtained by photovoltaics which have been explored in nature conditions can help to reduce the electrical load of PEMFC and increase the efficiency (over 30%).

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.184.2-184.2
• /
• 2010

This study performs modelling and simulation of permanent magnetic synchronous generator wind turbine by using Matlab & Simulink. In simulation, change of wind velocity, change of load, and voltage decrease of infinite bus are performed. Through such simulation, different with wiring system that there is only existing load, this study can confirm problems and voltage changing characteristics, which can occur in distributed electric power that load and electric power is mixed and operated, especially, in interconnecting with wind power generation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.186.1-186.1
• /
• 2010

풍력발전 설비의 발전기로는 구조가 간단하고 견실한 유도형 발전기가 일반적으로 사용되고 있다. 풍력발전은 계통 연계시에 정격전류의 7~8배의 돌입전류가 흘러 발전저하를 무시하기 어렵다. 따라서, 돌입전류 억제 및 대책의 검토가 필요하다. 본 연구는 MATLAB/SIMULINK를 통해 유도기형 풍력발전기를 모델링 및 시뮬레이션하고, 유도기형 풍력발전기 계통연계시 발생하는 돌입전류를 저감하는 방법에 대해 살펴보았다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.3
• /
• pp.7-14
• /
• 2008

In modern aircraft, an autopilot system is getting more important. There are not many autopilot systems applied to small aircraft. Also the autopilot system in large or medium aircraft is difficult to apply to small aircraft directly. It is necessary to make a new autopilot system for small aircraft. In this paper, we implement the small aircraft simulator with autopilot system using SIMULINK. The various modes of autopilot - such as altitude select/hold, attitude hold, heading hold, etc. - are implemented to the flight simulator and tested. We also implement the VOR mode for aircraft guidance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.1
• /
• pp.38-45
• /
• 2006

This paper presents load torque observer that is used to deadbeat control method in the induction motor(IM) precision position control system. The proposed algorithm shows robustness on induction servo motor system. All of the gain has been obtained on discrete domain analysis. The simulation has been obtained by the simulink. The results show that proposed system has good effectiveness for the disturbance of the induction servo motor system using DS1102 board.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.955-956
• /
• 2011

본 연구의 목적은 전기 자동차 BDU(Battery Disconnected Unit)의 방열 설계를 위해 전기 및 열 등가회로를 설계하여 온도 특성을 파악하는 것이다. 이 온도 특성을 분석하기 위해서 해석 프로그램으로 매트랩(matlab)의 시뮬링크(simulink) 프로그램을 사용하였으며, 각 소자에서의 발열과 최대 온도 그리고 평균 온도의 해석 값을 통해 실험결과 데이터와 접목 시킨다면, 배터리 팩(battery pack)의 핵심 부품인 BDU의 최적 방열 설계를 이룰 수 있을 것으로 판단된다.