• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.523-531
• /
• 2012

The performance simulation of a desiccant rotor, which is a core component of a desiccant cooling system, was conducted on the basis of a theoretical solution of the heat and mass transfer process in the rotor. The simulation model was validated by comparing simulation results with experimental data; reasonable agreement was observed. The effect of the rotation speed on the performance of the desiccant rotor was investigated for various operation conditions: temperature (50 to $70^{\circ}C$), humidity ratio (0.01 to 0.02 kg/kg DA), and flow rate of regeneration air. The optimum rotation speed was determined from the maximum moisture removal capacity (MRC) of the desiccant rotor, and it was found to vary with the operation conditions. Further, the correlation for the optimum rotation speed was determined by regression analysis.

• Korean Journal of Optics and Photonics
• /
• v.22 no.6
• /
• pp.247-255
• /
• 2011

The optical performance of LLF(Lenticular Lens Film)-based backlight was studied by using optical simulation as functions of the aspect ratio and the refractive index of lenticular lenses. In order to perform reliable simulation, the BSDF(bi-directional scattering distribution function) of the scattering dots on the bottom surface of the light guide plate was obtained as a superposition of the Lambertian and the elliptic Gaussian distribution components by comparing the experimental results and the simulation for the luminance distribution on the light guide. Based on this approach, an appropriate BSDF of the scattering dots of the light guide was constructed. The resultant values of the optimized aspect ratio and the refractive were found to be 1.25 and 1.65, respectively. In spite of the hybrid aspects of LLF incorporating both diffusing and collimating functions, the optical performance, in particular the on-axis luminance of LLF-based backlight was inferior by about 20% compared to that of conventional backlights adopting one prism film. However, the combination of two lenticular lens films resulted in comparable luminance gain as well as smooth decrease in the luminance with the viewing angle without exhibiting any side lobes.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.37-47
• /
• 2019

In the present study, the influences of the fire curtain and natural vent in a theater fire were investigated through the numerical simulation of a reduced-scale model of a theater fire using the Fire Dynamics Simulator (FDS). Based on a previous experimental study using the reduced-scale model, the 1/14 reduced-scale model and its conditions were constructed according to the law of similarity with a real-scale theater. Through a series of numerical simulations, the smoke movements were visualized, and the temperatures in the stage and auditorium, mass flow rate of the outflow through natural vent, and time at which smoke started moving toward the auditorium were measured and analyzed. The general trends on the effects of the fire curtain and natural vent during the theater fire predicted by the present numerical simulation were similar to the previous experimental results. For quantitative comparison of the present numerical simulation and previous experimental results, the mean percentage errors of temperatures in the stage and auditorium, and the mass flow rate of outflow through the natural vent were calculated. The present numerical simulation results showed good agreement with previous experimental results with reasonable accuracy.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.59-59
• /
• 2002

램제트 추진기관은 압축과정을 별도의 부품 없이 형상에 의해서 감속하여 연소 압력비를 얻는다. 따라서 구동 마하수와 형상에 의해 흡입과정의 압축 효율이 결정된다. 설계점은 충분한 유량을 확보 할 수 있는 유량과 충격파 각을 조절하여 전압력 손실을 줄이도록 고려되어야 한다. 또한 연소가 일어나면 연소실 압력이 배압으로 작용하고 비행시에 받음각은 변하므로 이에 따른 성능 분석도 고려 되어야 할 사항이다. 본 연구는 국내에서 실험한 형상에 대해 수치계산을 수행하여 코드의 검증과 아울러 램제트 유동장의 수치적 시뮬레이션도 설계단계에서 하나의 도구로 이용할 수 있음을 보여준다. 실험에서는 배압 조건을 얻기 위해 유동 블록키지를 유로 내에 두어 상응하는 배압을 얻었지만 본 계산에서는 압력 경계조건을 직접 사용하였다. 유동이 비정상 특성을 가지므로 시간 정확도를 이차로 가지도록 이중시간 전진법을 사용하였다. 사용한 압력비는 충격파가 카울 끝에 닿는 임계상태에 가까운 12, 13, 14에 대해 계산을 수행하였고 부스터모드로 흡입구 끝이 막혀 있다가 램제트 모드로 바뀌어 연소실 압력이 위의 압력비라고 가정할 때의 비정상 천이 과정을 계산해 보았다. 본 계산은 흡입구 부분만을 떼어놓고 적절한 가정 하에 수행되었지만 연소실 내부도 비정상 특성을 가지므로 흡입구와 연소실을 동시에 같이 계산해야한다. 추후에 전체적인 계산을 진행하기 위한 전 단계로 흡입구 계산만을 수행하여 실험과 잘 일치하는 계산 결과를 얻었고 전체 계산을 위한 연구는 진행 중에 있다.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.4
• /
• pp.209-220
• /
• 2016

Clay minerals are a major player to determine geochemical cycles of trace metals and carbon in the critical zone which covers the atmosphere down to groundwater aquifers. Molecular dynamics (MD) simulations can examine the Earth materials at an atomic level and, therefore, provide detailed fundamental-level insights related to physicochemical properties of clay minerals. In the current study, we have applied classical MD simulations with clayFF force field to dioctahedral clay minerals (i.e., gibbsite, kaolinite, and pyrophyllite) to analyze and compare structural parameters (lattice parameter, atomic pair distance) with experiments. We further calculated vibrational power spectra for the hydroxyls of the minerals by using the MD simulations results. The MD simulations predicted lattice parameters and interatomic distances respectively deviated less than 0.1~3.7% and 5% from the experimental results. The stretching vibrational wavenumber of the hydroxyl groups were calculated $200-300cm^{-1}$ higher than experiment. However, the trends in the frequencies among different surface hydroxyl groups of each mineral was consistent with experimental results. The angle formed by the surface hydroxyl group with the (001) plane and hydrogen bond distances of the surface hydroxyls were consistent with experimental result trends. The inner hydroxyls, however, showed results somewhat deviated from reported data in the literature. These results indicate that molecular dynamics simulations with clayFF can be a useful method in elucidating the roles of surface hydroxyl groups in the adsorption of metal ions to clay minerals.

• Journal of Korea Game Society
• /
• v.19 no.1
• /
• pp.5-14
• /
• 2019

This paper presents a practical method to compute the closest approach distance of two ellipsoids in their inter-center direction. This is the key technique for collision handling in the dynamic simulation of rigid and deformable bodies approximated with ellipsoids. We formulate a set of equations with the inter-center distance and the contact point and normal for the two ellipsoids contacting each other externally. The equations are solved using fixed-point iteration and Aitken's delta-squared process. In addition, we introduce a novel stopping criterion expressed in terms of the error in distance. We demonstrate the efficiency and practicality of our method in various experiments.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.982-991
• /
• 1991

본 연구에서는 냉방기에서 널리 이용되고 있는 평판핀이 연속적으로 부착된 다관식 증발 열교환기에 대하여 (1) 냉매의 열역학적 물성치의 변화 (2) 냉매와 공기 측 열전달 계수의 변화 (3) 냉매측 관 마찰 손실등을 고려한 시뮬레이션 프로그램을 작성하고 그 결과를 실험을 통하여 보정 완성하였다. 계산결과로 부터 공조기기의 설계조건, 공조계통 해석을 위한 기초자료를 제시하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.271-277
• /
• 2006

Injection molding process is the manufacturing process that can obtain a high quality products in large quantity to a low cost. Since there are many input factors in every situation that can influence part's quality, the method is difficult to save the exact simulation data. Latest, it deals with the CAE method that supports the experiment, it is applied to the Design of Experiment for the optimum injection molding process. If there are many factors, the interaction among those factors must be considered by applying Design of Experiment which is taken from the technique of minimizing the number of experiment. Without a real test, it is taken the simulation data using $Moldflow^(R)$ software. $Moldflow^(R)$ is used for the analysis of injection molding process, it is analyzed the factors that affect a warpage using the Taguchi method and then the optimal injection molding process is obtained.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.13-22
• /
• 2017

This research proposes and applies a pipelining parallel processing technique to enhance the speed of visualizing the results of real-time simulations. Generally, a simulation with real-time visualization consists of three processes: executing a simulation model, transmitting simulation result, and visualizing simulation result. If we have these processes in serial, the latency from simulation to visualization will be very long, which degrades the speed of visualization of data from real-time simulation. Thus, the main purpose of this research is maximizing performance by adapting pipelining parallel processing technique to the real-time simulation visualization. Also we show that performance is improved by adding multi-threading technique to each process. This paper proposes a theoretical performance model and simulation results of the techniques and then we applied this to an air combat simulation model as a case study. As the result, it shows that the performance is greatly enhanced than the original model's execution time.

• Journal of Sensor Science and Technology
• /
• v.10 no.4
• /
• pp.266-272
• /
• 2001

A coil-type capacitive sensor on which the deterioration of the car engine oil can be in situ measured, has been developed. The sensor was designed to get over 10 pF at the limited space on the drain hole of the oil pan. The design factors for stable capacitance measurement such as coil diameter and winding condition, materials and configuration of the coil former, and shielding method, etc., were known by both computer simulation and experimental investigations. The dielectric properties measured by several sensors for an used sample oil were consisted within 0.25%. The sensor installed on the car having severe vibration, temperature and humidity fluctuation, even electromagnetic noise, has shown very distinguishable results.