• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.115-131
• /
• 2018

Extension plate attached PHC piles and bolts spliced PHC piles were installed in field test site. Pile integrities were checked during installation with dynamic pile test and the actual pile conditions after installation were compared with integrity index (${\beta}$ index) by PDA test. Theoretically the break in near pile end or pile end (especially extension plate itself) was very difficult to access by integrity index (${\beta}$ index) and also require a high level of knowledge and field experience on PDA test. First actual wave equation of bolts spliced PHC piles due to bolts spliced equipment can be different with welding spliced. Second wave length of the stress wave from installing can be longer than the height of bolts spliced equipment (about 100 mm). Third Beta processing in PDA analysis function is very difficult to access without a high level of knowledge and field experience on wave equation. Above-mentioned three reasons can make conclusion that traditional PDA test in domestic site can not access the integrity of bolts spliced equipment in bolts spliced PHC piles.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.51-63
• /
• 2011

Surface of fine-size exposed aggregate portland cement concrete pavements(FS-EAPCC) is consist by exposed coarse aggregate to remove upper 2~3mm mortar of concrete slabs. Advantages of FS-EAPCC are maintaining low-noise and adequate skid-resistance level during the performance period. However, FS-EAPCC is required rational management criteria for field application, since it is early stage for application. Design construction and quality control criteria of FS-EAPCC was temporary laboratory tests which including optimum mix and exposing method, selection of adequate aggregate, resistance against, environmental loading and etc. However, these criteria need to be validated base on field application. In this study, experimental constructions were performed and construction procedure and quality control criteria were suggested based on the performance of the FS-EAPCC.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.2
• /
• pp.105-113
• /
• 2010

Method or work type improvement is needed in relation to reducing cost and increasing efficiency by ensuring construction quality and reducing labor in the form work process. This would have a great influence on the entire construction process, and make the process of adopting materials and methods more rational and economic. Hence, this study aimed to develop a Synthetic Resins Euroform that could improve durability, water-proofing, sophistication, and organizational unity through the use of injection modeling. Accordingly, this paper first investigated various performance requirements and necessary techniques, and then verified feasibility by evaluating the physical safety and technical validity when it is applied to construction field. In addition, this study evaluated the constructability, safety performance, environmental performance, and systemic excellence in terms of maintaining convenience of Synthetic Resins Euroform. Moreover, to verify feasibility in the construction field, this study analyzed and evaluated the maximum stress by measuring the load and deformation of the space of the horizontal furring, which is attached to Euroform as an armature.

• Journal of the Society of Disaster Information
• /
• v.9 no.2
• /
• pp.206-213
• /
• 2013

The paper presents the field applications and evaluation results of solid epoxy asphalt mixture for steel bridge deck. The material was developed in Japan. The material properties of epoxy asphalt mixture were evaluated through various literature review, and the mix design and mixture evaluation were conducted. According to the research results, the application of epoxy asphalt mixture for steel bridge deck was noticeable compare to the conventional ones. In addition, results from 3D finite element analysis showed that the performance of epoxy asphalt mixture for steel bridge deck was proved to be satisfied. As a result, a pilot test section was constructed using the epoxy asphalt mixture produced from conventional batch plant system. BPT test results showed that friction of the epoxy asphalt mixture was higher than the requirements compare to that of the conventional one.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1098-1107
• /
• 2007

과거 치수적 목적에 의해 진행하던 하천정비방식이 최근에 친환경적 개념의 정비방식으로 전환되면서 하천환경개선에 대한 관심과 공감대가 증가되고 있다. 일부 지자체를 중심으로 하천살리기 운동을 비롯해 하천의 환경기능을 개선하려는 노력이 진행중이며 전국적으로 자연형 하천정비 또는 친환경적 하천복원 등의 사업이 활발히 시행되고 있다. 자연형 하천정비 개념의 도입이후 많은 하천에 다양한 자연형 호안공법이 시공되어 가고 있는 상황에서 보다 적합한 호안공법의 적용을 위해서는 하천의 환경특성을 고려할 필요가 있다. 이는 대상 하천이 지니는 특성에 적합한 호안공법을 선정하는 데 선결되어야 할 문제이며, 적용 호안이 시공 이후 하천환경과 얼마나 조화를 이루는가를 담보할 수 있는 방안이라 할 수 있다. 따라서 본 연구에서는 상기의 조건을 만족시킬 수 있는 호안에 대한 평가를 위해서 광주천을 대상으로 하여 호안에 대한 평가를 실시하였다. 대상하천인 광주천은 광주시를 관통하는 도시하천으로, 현재 자연형 하천정화사업을 시행하고 있으며 2009년에 완공될 예정이다. 광주천의 호안에 대한 평가를 위해 수리적 안정성, 식생의 건전성과 경관/심미성 및 생태성을 포함한 평가방식을 개발하고, 개발된 기법을 광주천에 적용하여 하천공사 전후의 호안을 평가하고 그 결과를 비교함으로서 호안평가 방법을 확립하는 것이 본 연구의 목적이다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.407-408
• /
• 2023

This article proposes a method to assess construction safety risk during the construction phase based on accident loss costs. Risk assessments for hazardous construction work are required by law, but they lack quantitative criteria. To address this, a survey estimated loss costs due to fatalities in the construction industry, finding labor loss cost and delay reimbursement cost to be the largest factors. The proposed method uses algorithm to calculate expected accidents and risk levels based on project characteristics, work methods, personnel, and environment data. This method is expected to enhance the reliability and usability of risk assessments during the construction phase of construction projects.

• 월간 기계설비
• /
• s.38
• /
• pp.38-43
• /
• 1993

대한주택공사에서는 `93년도에 아파트 위생 난방설비분야에 약 20여가지의 신기술을 도입 적용하여 시공성 개선과 상당한 원가절감을 이룩하였다. 이 공법들은 장기간의 실험연구와 사후평가를 거쳐 결과를 도출한 것도 있으나 시공 및 설계방법을 구체화하여 실무에 적용한 사항도 있다. 향후 설비설계에 도움이 되고 보다 발전적인 기술개발의 기틀이 되었으면 하여 `93년도에 도입된 주요공법을 소개하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.747-756
• /
• 2016

In this paper, a connection details for precast arch structures was proposed. Experiments were performed to evaluate structural performance of the loop connection details satisfying current design requirements and of alternative details for improvement of constructability. Precast arch specimens considering the current design requirements showed higher structural capacity than a cast-in-place arch specimen. Crack width at the connection of arch crown showed smaller value than 0.2 mm due to increased compression force by the applied vertical load. Strengthening by wire-mesh at notch area of the connection improved initial crack control capability. Connection detail with couplers and headed bars showed similar capacity to the reference specimen. The alternative details to improve constructability of reinforcements can be used without decreasing structural performance. Specimens with smaller internal diameter of mandrel and shorter loop splicing than the current design codes showed worse behavior in terms of crack width control.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2105-2110
• /
• 2008

최근 환경적 기능을 중요시하는 시대적 흐름에 맞추어 친환경적으로 하천의 정비가 이루어지고 있다. 하천에서 호안은 생태학적인 측면에서 볼 때 하천을 중심으로 한 생활영역을 가지는 생물에게 육역과 수역의 연결부로서 추이대(ecotone)의 기능을 담당하고 있어 그 중요성은 이루 말할 수 없다. 그럼에도 불구하고 실제 자연친화적 하천정비에서 조차 호안공법의 선정은 객관적인 자료와 평가기법의 부재로 하천의 환경특성을 고려하지 못한 채 무분별하고 획일적인 공법으로 시공이 이루어지고 있다. 따라서 본 연구에서는 향후 자연친화적 하천공사 시 시공하천의 특성을 고려한 호안공법의 선정이 객관적이고 합리적으로 이루어질 수 있도록 기존의 호안평가지표 및 기법을 수정 제안하였다. 제안된 호안평가기법의 평가항목은 안정성, 환경성 그리고 친수 어메니티이다. 금번 연구에서 제안한 호안평가기법의 적용을 위하여 전국의 하천을 대상으로 사전조사를 실시한 후 호안평가의 적용이 용이한 91개 하천을 선정하여 현장조사를 실시하였다. 그리고 조사를 통해 확보한 호안 자료는 호안평가기법을 이용하여 호안의 안정성, 환경성 그리고 친수 어메니티에 대한 평가가 이루어졌으며, 제안된 호안평가기법은 호안 및 하천의 특성을 적절히 반영함을 확인 할 수 있었다. 본 연구를 통해 확보된 자료는 향후 생태적 측면을 고려한 하천정비의 방향제시 등의 기대효과를 가져올 수 있으리라 생각되며, 호안공법 선정을 위한 호안평가기법 개발의 기초자료로 유용하게 활용될 것으로 사료된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.315-323
• /
• 2016

This study examined the durability and method for making a mockup of bobsled tracks for constructing a bobsled stadium, which is a sport in the Winter Olympics. As bobsleigh games are very fast and dangerous, a safety design for players and a precise construction using highly efficient shotcrete is necessary. Moreover, a general molding construction is difficult because bobsleigh tracks are composed of various curves and slopes, and it is necessary to construct them using high-strength and high durability materials. The developed method for making a mockup and performing durability evaluation of bobsleigh tracks through this research will be applied in the construction of the 2018 Pyeongchang Winter Olympics Sliding centre and bobsleigh tracks using domestic techniques.