• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.33-36
• /
• 2001

In MC-CDMA systems effects of delay spread of the channel are reduced with increased symbol duration by simultaneously transmitting data symbols on the parallel subcarriers. However, the increased symbol duration causes the system to be more vulnerable to time selective fading. In this paper, we investigate the effects of time selective fading characteristics of the mobile channel from the viewpoint of desired signal power to inter-carrier interference power ratio at the combiner output of the MC-CDMA receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.681-688
• /
• 2007

Applying an appropriate received signal processing algorithm based on the channel characteristics is important to improve the receiver performance. Wireless channels in general exhibit various time-delay characteristics depending on their power delay profile. When the estimated channel power summation is used to determine the amount of time delay, a channel adaptive receiver structure can be implemented. In this paper, we derive a closed-form expression for the error probability of the channel classification when the estimated channel power summation is used to classify channel groups having different time delay characteristics, and present the performance gain utilizing multiple estimation results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.78-81
• /
• 1999

The position and time errors of a conventional L1-band GPS receiver (1575.42MHz) are known to be about 100 m and 70 ns, respectively. These errors are mainly due to the propagation delay of GPS satellite signals through ionosphere. Various L1/L2 dual-band GPS receivers are normally used to compensate for those position and time errors by detecting an accurate propagation delay. These receivers detect the propagation delay difference between the L1 and L2 signals based on the fact that the propagation delay through ionosphere is dependent on frequency and, from which, calculate an accurate propagation delay of the GPS signals through ionosphere. In this paper, we analyzed the architecture of a L1/L2 dual-band CPS receiver by high-level simulations with Synopsys's COSSAP Tool.

• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.603-610
• /
• 2003

On the optical network, it is important to build restoration scheme capable to network survivability in preparation of potential failure on communication route. This paper analyze the existing schemes on restoration of failure on the optical network, and propose deferred commit scheme to improve resource utilization and management efficiency. Also, the transfer flow of messages needed for transferring restoration signal are presented in a concrete way and delay time required by shared mesh restoration scheme is explained in a substantial way. Simulation-based comparative analysis of various schemes is performed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.8 s.350
• /
• pp.35-43
• /
• 2006

In the paper, we propose a new method for power optimization that uses path balancing based on stochastic estimation of glitch in Statistical Static Timing Analysis (SSTA). The proposed method estimates the probability of glitch occurrence using tightness probability of each node in timing graph. In addition, we propose efficient gate sizing technique for glitch reduction using accurate calculation of sizing effect in delay considering probability of glitch occurrence. The efficiency of proposed method has been verified on ISCAS85 benchmark circuits with $0.16{\mu}m$ model parameters. Experimental results show up to 8.6% of accuracy improvement in glitch estimation and 9.5% of optimization improvement.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.66-71
• /
• 2009

In view of mutual complementary feature of wide coverage and high data rate, the interworking between 3G cellular network and WLAN is a global trend of wireless communications. This paper introduces the analytic result of an authentication mechanism for 3GPP-WLAN seamless mobility under the USIM-based authentication test-bed. In a handover process between heterogeneous networks, authentication is the main factor of handover delay. So authentication processing time should be firstly reduced. This paper describes an USTM-based EAP-AKA test-bed implemented for handover in UMTS and WLAN interworking systems. Experimental result has shown that the fast re-authentication mechanism during handover has reduced the handover delay by about 48.6%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.5-8
• /
• 1998

기존의 바이폴라 논리회로에서 신호변환시 베이스 영역의 소수 캐리어를 빨리 제거 하기 위해서, 베이스 부분의 매몰충을 줄여서 npn트랜지스터의 베이스와 에피충과 기판사이에 병합 pnp 트랜지스터를 생성한 트랜지스터와 게이트 당 전달 지연 시간을 측정하기 위한 링-발진기를 설계, 제작하였다. 게이트의 구조는 수직 npn 트랜지스터와 기판과 병합 pnp 트랜지스터이다. 소자 시뮬레이션의 자료를 얻기 위하여 수직 npn 트랜지스터와 병합 pnp 트랜지스터의 전류-전압 특성을 분석하여 특성 파라미터를 추출하였다. 결과로서 npn 트랜지스터의 에미터의 면적이 기존의 접합넓이에 비해서 상당히 적기 때문에 에미터에서 진성베이스로 유입되는 캐리어와 가장자리 부분으로 유입되는 캐리어가 상대적으로 많기 때문에 이 많은 양은 결국 베이스의 전류가 많이 형성되며, 또 콜렉터의 매몰층이 거의 반으로 줄었기 때문에 콜렉터 전류가 적게 형성되어 이득이 낮아진다. 병합 pnp 트랜지스터는 베이스폭이 크고 농도 분포에서 에미터의 농도와 베이스의 농도 차이가 적기 때문에 전류 이득이 낮아졌다. 게이트를 연결하여 링-발진기를 제작하여 측정한 AC특성의 출력은 정현파로 논리전압의 진폭은 200mV, 최소 전달 지연시간은 211nS이며, 게이트당 최소 전달지연 시간은 7.26nS의 개선된 속도 특성을 얻었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9B
• /
• pp.751-759
• /
• 2003

We analyze the performances, such as the cell loss probability(CLR) and the cell delay time, of time division multiplexed(TDM) optical output buffers using traveling delay lines or delay-line loops for buffering. Since traveling delay lines used for buffering are superior over delay-line loops in terms of simplicity and signal quality, they were used in a conventional TDM optical output buffer. However, the latter is more flexible than the former in that the cell storage time is adjustable by changing the recirculating times of a cell in the loops. So we propose a novel TDM optical output buffer using delay-line loops for buffering. We show that the proposed TDM optical output buffer can reduce the number of buffering unit required to achieve a CLR of less than 10$^{-9}$ . When the number of buffering unit is sufficiently large, we show that both TDM optical output buffers have same cell delay time characteristic.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.49-56
• /
• 2005

In this paper, we describe a solution to improve the effects of the transmitter leakage signals on the frequency modulated continuous wave (FMCW) radar with a single antenna configuration. We analyze characteristics of the IF noise caused by insufficient isolation between transmitter and receiver. The magnitude of the intermediate frequency (IF) noise from a front-end can be reduced by matching the LO signal delay time with that of the largest leakage source. Because the IF noise has periodic singularities at nT$_{m}$/2, t=0,1,2$\cdots$, we find that spectrum of the IF noise due to the leakage signals is very similar to that of the VCO moduation signal except low frequency elements in the vicinity of DC. Based on the studies, we fabricated a W-band homodyne FMCW radar sensor and verified the proposed solution. The results are applicable to design of the homodyne FMCW radar with a single antenna configuration.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.103-107
• /
• 2003

현재 관측점간의 3차원 상대위치를 구하고 기준점의 측지학적 좌표ㆍ표고를 결정하는 작업을 수행하는 GPS(Global Positioning System) 측량은 신호가 전파인 관계로 대기권의 전파지연 오차를 포함하게 되며, 전리층 지연은 주파수에 반비례하는 특성이 있으므로 지역의 대소에 구분 없이 이주파수 수신기(dual-frequency GPS receiver)를 사용하여 정확하게 지연시간을 측정하고 그로 인한 측위정밀도의 정확성을 확보하고 있다. 본 연구는 비교적 낮은 가격인 일주파 수신기를 사용하여 기선거리별로 삼각점을 선점한 후 동일 시간에 관측을 실시하고 취득한 데이터 값을 추출한 후 기선거리에 따른 허용오차를 분석하고, 그 활용성 및 경제성과 일주파 수신기의 기선에 대한 사용 가능성을 분석하였다. 그 결과, 100km이내의 지역에서는 일주파 수신기 만으로도 충분히 만족스러운 결과를 얻을 수 있었다.