• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.5
• /
• pp.10-16
• /
• 2000

This paper presents new double-sided 3-dB branch-line coupler using CPW-to-Microstrip via-hole transitions for the multi-layer applications. The characteristic impedance is obtained using the even-odd mode method, and the circuit performance Is accurately estimated by the Finite Difference Time Domain(FDTD) method. The fabricated double-sided 3-dB branch-line coupler has less than 0.3 dB power dividing imbalance and 1。 phase imbalance, greater than 30 dB isolation, and 25 dB return loss over a 20% bandwidth centered at 2 GHz. Calculated and fabricated results show that this coupler provides better performance as compared to the conventional microstrip branch-line couplers.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.113-119
• /
• 2014

The positioning accuracy of GNSS surveys deteriorates due to various error factor, and many users sometimes ignore Phase Center Variation (PCV) of antennas. IGS provides an ANTEX file which contains PCV correction information to correct for PCVs. But it is not directly applicable because PCV correction information is provided at 5-degree intervals in the azimuth and elevation directions for the case of receiver antennas, and at 1-degree intervals in the nadir angle for the case of satellite antennas. So, we devised new and optimal ways of interpolating PCV in any desired line of sight to the GNSS satellite. We used spherical harmonics fitting methods in terms of the azimuth and elevation angle for interpolation, and found an optimal degree and order. It is shown that the best accuracy was obtained from the 8 by 8 spherical harmonics. If one requires lower burden on computing resources, the order and degree less than 8 could produce resonable accuracy except for 1st and 5th order.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.545-551
• /
• 2013

Timing recovery loop composed of the Timing Error Detector(TED), loop filter and resampler is widely used for the timing synchronization in MQASK receivers. Since TED is sensitive to the delay between the symbol period of the signal and sampling period, the output is averaged out when the symbol rate and sampling rate are quite different the recovery loop cannot work at all. This paper presents a sampling frequency discriminator (SRD), which detects the frequency offset of the sampling clock to the symbol clock of the MQASK data transmitted. Employing the SRD, the closed loop timing recovery scheme performs the frequency-aided timing acquisition and achieve the synchronization at extremely high sampling frequency offset, which can be used in variable symbol rate MQASK receivers.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.197-202
• /
• 1995

비정상(unsteady) 압축성(compressible) 유동에 의한 공력음향(aeroacoustics)을 모사하여 공력소음원을 해석하기 위해서는 고차(high order)의 정확도와 높은 해상도(resolution)를 가지며, 상대적으로 계산시간을 많이 필요로 하지 않는 외재적(explicit) 유한차분법이 필수적으로 요구된다. 이것은 주어진 차분방식과 격자계로써 공간과 시간상에 존재하는 미소크기의 파동성분들을 충분히 구현하여야 만족할 만한 수치해를 얻을 수 있기 때문이다. 본 연구에서는, 그러한 유한차분법 중 최근에 관심의 대상이 되고있는 삼각(tridiagonal)또는 오각(pentadiagonal) 집적유한차분법(compact finite difference scheme)이 최대의 해상도를 갖도록 하는 수학적인 방법을 개발하고, 이 방법으로써 새롭게 집적유한차분법을 최적화하였다. 개발된 최적화 방법은, 푸리에 해석법(Fourier analysis)을 통하여 파동수(wavenumber) 영역에서 수학적으로 계산된 위상오차(phase error)를 최소화하는 것이며, 이러한 개념과 방법은 본 연구에서 처음으로 집적유한차분법에 적용되었다. 여러가지 절단정확도(truncation order)에 대해서 최적화 된 집적유한차분법들이 실제 공간과 시간상에서 보여주는 정확도와 오차특성을 알아보기 위하여, 이 방법들을 1차원 선형파동방정식에 적용하였고, 이 결과를 통하여 가장 정확하고 효과적인 절단정확도의 집적유한차분법을 선별하였다. 특히, 오각(pentadiagonal)법에 비해 더욱 효율적인 6차 삼각(tridiagonal)법을 1차원 Euler방정식에 적용하여, 비선형 파동에 대한 모사를 수행할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.35-40
• /
• 2005

This paper proposes a fractional-N phase-locked loop (PLL) frequency synthesizer using the 3rd order ${\Delta}{\sum}$ modulator for 900MHz medium speed wireless link. The LC voltage-controlled oscillator (VCO) is used for the good phase noise property. To reduce the lock-in time, a charge pump has been developed to control the pumping current according to the frequency steps and the reference frequency is increased up to 3MHz. A 36/37 fractional-N divider is used to increase the reference frequency of the phase frequency detector (PFD) and to reduce the minimum frequency step simultaneously. A 3rd order ${\Delta}{\sum}$ modulator has been developed to reduce the fractional spur VCO, Divider by 8 Prescaler, PFD and Charge pump have been developed with 0.25um CMOS, and the fractional-N divider and the third order ${\Delta}{\sum}$ modulator have been designed with the VHDL code, and they are implemented through the FPGA board of the Xilinx Spartan2E. The measured results show that the output power of the PLL is about -lldBm and the phase noise is -77.75dBc/Hz at 100kHz offset frequency. The minimum frequency step and the maximum lock-in time are 10kHz and around 800us for the maximum frequency change of 10MHz, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.74-80
• /
• 2009

This paper describes a $2{\sim}6GHz$ CMOS frequency synthesizer that employs only one LC-tank voltage controlled oscillator (VCO). For wide-band operation, optimized LO signal generator is used. The LC-tank VCO oscillating in $6{\sim}8GHz$ provides the required LO frequency by dividing and mixing the VCO output clocks appropriately. The frequency synthesizer is based on a fractional-N phase locked loop (PLL) employing third-order 1-1-1 MASH type sigma-delta modulator. Implemented in a $0.18{\mu}m$ CMOS technology, the frequency synthesizer occupies the area of $0.92mm^2$ with of-chip loop filter and consumes 36mW from a 1.8V supply. The PLL is completed in less than $8{\mu}s$. The phase noise is -110dBC/Hz at 1MHz offset from the carrier.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.101-111
• /
• 2008

Strain imaging in a medical ultrasound imaging system can differentiate the cancer or tumor in a lesion that is stiffer than the surrounding tissue. In this paper, a strain imaging technique using quasistatic compression is implemented that estimates the displacement between pre- and postcompression ultrasound echoes and obtains strain by differentiating it in the spatial direction. Displacements are computed from the phase difference of complex baseband signals obtained using their autocorrelation, and errors associated with converting the phase difference into time or distance are compensated for by taking into the center frequency variation. Also, to reduce the effect of operator's hand motion, the displacements of all scanlines are normalized with the result that satisfactory strain image quality has been obtained. These techniques have been incorporated into implementing a medical ultrasound strain imaging system that operates in real time.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.65-72
• /
• 2001

This paper deals with a novel full digital control of the single-phase PWM(Pulse Width Modulation) inviter for UPS(Uninterruptible Power Supp1y). The voltage and current of output filter capacitor as a state variable are the feedback control input. In the proposed scheme a double deadbeat control consisting of minor current control loop and major voltage control loop have been developed In addition, a second order deadbeat currents control which should be exactly equal to its reference in two sampling time without error and overshoot is proposed to remove the influence of the calculation time delay. The load current prediction is achieved to compensate the load disturbance. The simulation and experimental result shows that the proposed system offers an output voltage with THD(Total Harmonic Distortion) less than 5% at a full nonlinear load.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.2
• /
• pp.280-295
• /
• 2014

This paper analyzes the topological structure of housing market networks with an application of minimal spanning tree method into apartment sales markets in the Capital Region over the period 2003.7-2014.3. The characteristics of topological network structure gained from this application to some extent share with those found in equity markets, although there are some differences in their intensities and degrees, involving a hierarchical structure in networks, an existence of communities or modules in networks, a contagious diffusion of log-return rate across nodes over time, an existence of correlation breakdown due to the time-dependent structure of networks and so on. These findings could be partially attributed to the facts that apartments as a quasi-financial asset have been strongly overwhelmed by speculative motives over the period investigated and they can be regarded as a housing commodity with the highest level of liquidity in Korea.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.17-17
• /
• 2020

일반적인 연안 해역에서 창조지속시간과 낙조지속시간은 거의 동일한 수준을 보여 조위곡선은 대칭적인 형태를 띠게 된다. 그러나 M4분조나 MS4분조와 같은 천해조가 발달된 해역에서는 그 모체가 되는 M2분조나 S2분조와의 상대적인 위상차에 따라 조위곡선이 비대칭적인 형상을 띠기도 한다. 창조지속시간이 길 경우 낙조시 최대조류속이 크게 되는 낙조우세가 형성되는 반면 낙조지속시간이 길 경우에는 반대로 창조우세가 형성된다. 소류사의 움직임은 유속의 6승에까지 비례하므로 이러한 최대조류속 차이에 따라 창조우세 또는 낙조우세 해역에서 소류사 이동량에는 큰 차이가 발생할 수 있다. 감조하천의 경우 상류로 갈수록 창조우세화하는 것이 일반적인 것으로 알려져 있으며 국내에서는 금강을 비롯한 군산해역이 대표적이다. 창조우세인 군산해역과 반대로 영산강하구 및 목포해역의 경우 낙조우세를 보이고 있는데, 그 근원은 황해에서의 순환특성과 함께 목포해역 인근의 드넓은 조간대에 기인하는 것으로 추정하고 있다. 특히 인접한 무안만에서는 낙조지속시간이 창조지속시간에 비해 2시간 이상 짧아 국내에서 가장 심한 수준의 낙조우세를 보이고 있으며, 영산강하구 낙조우세의 근원으로 평가되고 있다. 한편 조간대가 발달된 해역은 천해조 생성에 따라 낙조우세 경향이 있음과 관련하여 Kang and Moon(2001)은 조간대가 조석파의 전파와 천해조 발생에 미치는 영향성에 대하여 수치실험을 통해 연구한 결과 무안만의 낙조우세는 조간대의 발달에 기인함을 재확인한 바 있다. 따라서 낙조 우세를 수치모형을 통해 재현하기 위해서는 조간대 모의가 필수적임과 동시에 낙조우세를 재현하기 위해서는 천해조 개방경계 설정이 필요하다고 알려져 있다. 또한 이렇게 천해조가 발달된 하구에서 조석비대칭 현상은 퇴적물 이동에 직접적인 영향을 미치게 되는데 Kang et al.(2002)은 소류사 및 부유사 이동에서 이러한 영향성에 대한 연구를 수행한 바 있다. 그 결과 천해조가 발달된 이러한 해역에서 퇴적물 이동과 관련된 수치모의시 M2분조와 같은 천문조 경계조건에 부가하여 M4분조의 천해조까지 포함시킬 것을 제안한 바 있다. 이와 같이 하구역에서는 천해조 발달로 인해 조석비대칭이 두드러지게 발달되어 있는 경우가 많으며, 감조하천 상류로 갈수록 비대칭은 더욱 심화되는 경향이 있다. 따라서 감조하천 하류부에서 조석을 고려한 경계조건을 부여하여 하천의 흐름양상을 수치적으로 모의할 경우 천해조가 발달된 하구역에서는 천해조가 포함된 경계조건은 필수적이라 할 수 있다.