• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.359-361
• /
• 2002

국내에서는 1990년대 이후부터 주유소 및 유류저장시설 부근의 토양 및 지하수오염에 관한 법이 제정되었으며 그와 관련된 복원 및 정화 기술개발에 관한 연구가 진행되고 있다. 그 중 미생물학적 대사를 이용하는 생물학적복원기술(Bioremediation)은 유류로 오염된 지역에서 정화 및 복원방법으로 적용되고 있으며 또한 경제적인 대안으로 제시되고 있다. Bioremediation기법중 하나인 bloventing은 운전 및 처리비용의 감소와 효율의 향상적인 측면에서 여러 연구자들에 의해 수행되고 있다. 기존에는 오염토양에 대한 물리ㆍ화학적 분석과 미생물 활성에 미치는 인자의 측정이 주를 이루었다. 그러나, 최근에는 토양 가스내 $CO_2$ $O_2$의 측정ㆍ분석을 통한 분해율 평가와 탄화수소 분해에 대한 경과 및 복원시간을 예측하고자 하는 연구가 이루어지고 있는 중이다. 본 연구의 목표는 유류오염지역을 복원하기 위한 기술 중 생물학적 복원기술(bioremediation)의 하나인 bioventing 기술의 국내 적용가능성을 알아보고 궁극적으로 국내 실정에 적합한 bioventing공법의 개발을 목표로 한다. 이를 위해 lab-scale bioventing process를 이용하여 생부해를 최대화시키고 오염성분의 휘발을 최소화시키는 bioventing system의 최적운전 mode(연속식, 간헐식)를 개발하기 위해 공기공급량과 생분해량, 그리고 휘발되는 탄화수소양과의 관계를 평가하는 연구를 수행하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.109-117
• /
• 2006

Hot firing performance test of hydrazine decomposition catalyst used for monopropellant thruster of satellite and launch vehicle was performed on the ground. A test equipment for hot firing performance measurement of catalyst test was developed in collaboration with Hanwha Corp., and the catalyst firing performance were tested with the equipment. After a reaction delay time, a catalyst activity and a granule stability were measured for 2 times, satisfactory results were obtained such as 25msec, 2%, $704^{\circ}C$ for each test items on the average. In addition, the current development status of domestic prototype catalyst and its decomposition performance test results are presented.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.214-217
• /
• 2001

자연계에서는 오염물질이 단일물질로 존재하기보다는 혼합물로 존재하는 것이 대부분이다. 본 연구에서는 지하수 오염물질 chlorinated aliphatic hydrocarbon(CAH)들 중 trichloroethylene(TCE), vinyl chloride(VC)에 대해서 Fe$^{\circ}$와 함께 미생물, 활성탄을 이용하여 단일물질 및 혼합물질상태에서 그 분해특성을 살펴보았다. 실험은 120$m\ell$ serum bottle을 이용하여 단일물질 및 혼합물질상태에서 그 분해특성을 살펴보았다. 실험은 120$m\ell$ serum bottle을 이용하였고 headspace 50${\mu}\ell$를 GC에 주입하여 각 오염물질 농도를 분석하였으며, Fe$^{\circ}$, Fe$^{\circ}$+ cell, Fe$^{\circ}$+ 활성탄 3가지 조건에서 TCE (25${\mu}\ell$)가 단일화합물 또는 VC(10$\mu\textrm{m}$)와 혼합화학물로 존재시 분해특성을 조사하였다. 단일화합물로 존재시 2시간후 TCE농도 측정 결과 Fe$^{\circ}$만을 이용하였을 때보다 활성탄, Cell을 함께 이용하였을 경우 그 분해율이 각각 1.6배, 1.8배 높게 나타났다. 그러나, VC와 혼화합물로 존재시 TCE 분해율은 단일 화합물로 존재시와 비교 Fe$^{\circ}$, Fe$^{\circ}$+ 활성탄, Fe$^{\circ}$+ cell 조건에서 각각 63%, 28%, 5%로 나타났다. VC는 Fe$^{\circ}$만으로는 분해가 되지 않았지만 cell에 의해 완전분해 되었으며, 함께 존재시 TC는 Fe$^{\circ}$만으로는 분해가 되지 않았지만 cell에 의해 완전분해 되었으며, 함께 존재시 TCE분해에 저해작용을 미치는 것으로 나타났다.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.407-413
• /
• 2017

The fundamental property of magnesia phosphate cement (MPC) for concrete repair material was investigated in this research. For mechanical properties, setting time, compressive strength and tensile/flexural bond strength were measured, and hydration products were detected by X-ray diffraction. The specimens were manufactured with dead burnt magnesia and potassium dihydrogen phosphate was admixed to activate the hydration of magnesia and a borax was used as a retarder. To observe the pore structure and ionic permeability of MPC mortar, mercury intrusion porosimetry was performed together with rapid chloride penetration test (RCPT). As a result, time to set of Fresh MPC mortar was in range of 16 to 21 min depend on the M/P ratio. Borax helped delaying setting time of MPC to 68 min. The compressive strength of MPC with M/P of 4 was sharply developed to 30 MPa within 12 hours. The compressive strength of MPC mortar was in range of 11.0 to 30.0 MPa depend on the M/P ratio at 12 hours of curing. Both tensile and flexural bond strength of MPC to old substrate (i.e. MPC; New substrate to OPC; Old substrate) were even higher than ordinary Portland cement mortar (i.e. [OPC; New substrate] to [OPC; Old substrate]) does, accounting 19 and 17 MPa, respectively. The total pore volume of MPC mortar was lower than that of OPC mortar. MPC mortar had the entrained air void rather than capillary pore. The RCPT showed that total charge passed of OPC mortar had more than that of MPC mortar, which can be explained by the pore volume and pore distribution.

• Korean Journal of Optics and Photonics
• /
• v.19 no.5
• /
• pp.370-375
• /
• 2008

High-speed high-resolution terahertz time-domain spectroscopy (THz-TDS) is demonstrated using the asynchronous-opticalsampling (AOS) method. A time-domain signal with a 10-ns time window is rapidly acquired by using two femtosecond lasers with slightly different repetition frequencies to generate and detect a terahertz pulse wave, without a mechanical delay stage. The spectrum obtained by the fast Fourier transformation (FFT) of the time-domain waveform has a frequency resolution of 100 MHz. The time resolution of our spectrometer is measured using the cross-correlation method to be 278 fs. A transmission spectrum of water vapor is measured and the absorption lines are analyzed in the frequency range from 0.1 to 1.2 THz.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.2
• /
• pp.141-146
• /
• 1986

As a fundamental study of fresh water fish on a suitable cooking method and on flavor components from the view point of food science, changes in the free amino acid composition of the muscle extracts of snakehead (Channa argus) during heating in boiling water were investigated. The muscle extract of raw fish was featured a very high content of glycine, taurine, glutamic acid and histidine, and a large amount of urine was also determined in the extract; the former four components comprised about $53\%$ of the total free amino acids. The total extractable nitrogen was greatly increased with the heating time till 120 minutes of heating, while it gradually decreased thereafter. The apparently increased components on heating of 120 minutes were taurine, glycine, alanine, hydroxyproline, and ${\beta}$-aminoisobutyric acid, etc. including urea. After hydrolysis of the extracts, some of the amino acids were increased, the content of ethanolamine, lysine, 1-methyl histidine, phenylalanine, glutamic acid and taurine, etc. were apparently increased.

• KSBB Journal
• /
• v.19 no.3
• /
• pp.169-173
• /
• 2004

The Rhodiola Sachalinensis 5 g were mixed and extracted with methanol 150 $m\ell$ at the room temperature for 12 h. The effluents were collected and grouped into the two. Un this experimental condition, the mobile phase composition were linearly changed as follows; water/methanol : 90/10 - 30/70 (vol. %, for 5 min), 30/70 - 10/90 (vol. %, for 15 min) and an analytical column (3.9 ${\times}$ 25 em, 15 $\mu\textrm{m}$ particle size, and 300 ${\AA}$ pore size) was utilized. The performance of the extracted Rhodiola Sachalinensis as a whitening agent was not favorable, so it classifies the Rhodiola Sachalinensis extractions with two fractions and collects each fraction for whitening agent assay. For the in-vivo melanin production ratio assay that used melanin-a cell in 10 ppm concentration, it was 58.6%, the first fraction of the effluents collected between 1.0 and 4.0 min, while it was 60％ between 10.4 and 17.6 min for the second fraction, which were more efficient than that of arbutin, 45.6%.

• Journal of Acupuncture Research
• /
• v.27 no.5
• /
• pp.105-115
• /
• 2010

목적 : 침은 다양한 질환의 치료에 보편적으로 쓰이고 있으며 고혈압, 당뇨, 정신질환 등을 포함한 스트레스성 질환에도 활용되고 있다. 결박 스트레스는 스트레스 호르몬(코르티코스테론, 멜라토닌)의 혈장 농도를 크게 증가시키는 간단하고 효과적인 스트레스 요인이다. 본 연구는 결박 스트레스를 시행한 백서의 스트레스 호르몬의 혈중 농도에 대한 전기침의 효과를 조사하였다. 방법 : 결박 그룹은 2시간의 결박 스트레스를 받았으며 결박 스트레스 및 고주파수 전침그룹과 결박 스트레스 및 저주파수 전침그룹은 결박 스트레스와 고주파수 전침, 또는 결박 스트레스와 저주파수 전침을 동시에 각각 시행하였다. 급성 스트레스 유발 시에는 결박 스트레스를 1차례, 만성 스트레스 유발 시에는 7차례 시행하였다. 전기침 자극에는 우측 족삼리($ST_{36}$)를 사용하였다. 결박 스트레스 및 전기침으로 유도된 코르티코스테론과 멜라토닌의 농도를 측정하기 위해서 결박 스트레스 및 전기침 자극이 시작된 30분, 60분, 90분, 120분 후에 백서를 단두하여 혈액 샘플을 채취하였다. 결과 : 급성 스트레스 유발 시에는 고주파수 전침그룹의 코르티코스테론 혈장 농도가 증가하였고 멜라토닌 농도의 시간적 패턴을 변화시켰으나 저주파수 전침그룹에서는 유의한 변화가 없었다. 만성 스트레스 유발 시에는 고주파수 전침그룹의 혈장 코르티코스테론과 멜라토닌 농도가 유의하게 감소되었으나 저주파수 전침그룹에서는 변화가 없었다. 결론 : 이러한 결과는 전침이 결박 스트레스로 유도된 스트레스 호르몬의 혈장 농도 및 시간적 분비패턴을 변화시키는 효과가 있으나 스트레스 호르몬 반응을 변화시키는 데 있어서 주파수에 따른 유의한 차이가 있다는 것을 의미한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.45-55
• /
• 2008

The objective of this research was to develop a VEPCD (ViscoElastoPlastic Continuum Damage) Model which is used to predict the behavior of asphalt concrete under various loading and temperature conditions. This paper presents the VEPCD model formulated in a tension mode and its validation using four hot mix asphalt (HMA) mixtures: dense-graded HMA, SBS, CR-TB, and Terpolymer. Modelling approaches consist of two components: the ViscoElastic Continuum Damage (VECD) mechanics and the ViscoPlastic (VP) theory. The VECD model was to describe the time-dependent behavior of HMA with growing damage. The irrecoverable (whether time-dependent or independent) strain has been described by the VP model. Based on the strain decomposition principle, these two models are integrated to form the VEPCD model. For validating the VEPCD model, two types of laboratory tests were performed: 1) a constant crosshead strain rate tension test, 2) a fatigue test with randomly selected load levels and frequencies.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.8-17
• /
• 2012

In this paper we proposes a new framework to obtain 3D shape information of thin film rapidly. The conventional equipments based on reflectometry are not suitable for obtaining 3D overall shape information of thin film rapidly since they require more than 30 minutes to measure the absolute thickness for 170 points. The proposed framework is based on an image analysis method that extracts contour lines from interference fringes images using Canny edge detector. The absolute thickness for contour lines are measured and then a height map from the contour lines is obtained by interpolation using Borgefors distance transformation. The extracted height map is visualized using the DirectX 3D terrain rendering method. The proposed framework can provide 3D overall shape information of thin film in about 5 minutes since relatively small number of real measurement for contour lines is required.