• Progress in Medical Physics
• /
• v.14 no.2
• /
• pp.90-98
• /
• 2003

Purpose : A new virtual simulation technique for craniospinal irradiation (CSI) that uses a CT-simulator was developed to improve the accuracy of field and shielding placement as well as patient positioning. Materials and Methods : A CT simulator (CT-SIM) and a 3-D conformal radiation treatment planning system (3D-CRT) were used to develop CSI. The head and neck were immobilized with a thermoplastic mask while the rest of the body was immobilized with a Vac-Loc. A volumetric image was then obtained with the CT simulator. In order to improve the reproducibility of the setup, datum lines and points were marked on the head and body. Virtual fluoroscopy was performed with the removal of visual obstacles, such as the treatment table or immobilization devices. After virtual simulation, the treatment isocenters of each field were marked on the body and on the immobilization devices at the conventional simulation room. Each treatment fields was confirmed by comparing the fluoroscopy images with the digitally reconstructed radiography (DRR) and digitally composited radiography (DCR) images from virtual simulation. Port verification films from the first treatment were also compared with the DRR/DCR images for geometric verification. Results : We successfully performed virtual simulations on 11 CSI patients by CT-SIM. It took less than 20 minutes to affix the immobilization devices and to obtain the volumetric images of the entire body. In the absence of the patient, virtual simulation of all fields took 20 min. The DRRs were in agreement with simulation films to within 5 mm. This not only reducee inconveniences to the patients, but also eliminated position-shift variables attendant during the long conventional simulation process. In addition, by obtaining CT volumetric image, critical organs, such as the eyes and the spinal cord, were better defined, and the accuracy of the port designs and shielding was improved. Differences between the DRRs and the portal films were less than 3 m in the vertebral contour. Conclusion : Our analysis showed that CT simulation of craniospinal fields was accurate. In addition, CT simulation reduced the duration of the patient's immobility. During the planning process. This technique can improve accuracy in field placement and shielding by using three-dimensional CT-aided localization of critical and target structures. Overall, it has improved staff efficiency and resource utilization by standard protocol for craniospinal irradiation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.235-242
• /
• 2006

The precise estimation of total and organic carbon contents in sediments is fundamental to understand the benthic environment. To test the precision and accuracy of CHN analyzer and the procedure to quantify total and organic carbon contents(using in-situ acidification with sulfurous acid($H_2SO_3$)) in the sediment, the reference material s such as Acetanilide($C_8H_9NO$), Sulfanilammide($C_6H_8N_2O_2S$), and BCSS-1(standard estuary sediment) were used. The results indicate that CHN analyzer to quantify carbon and nitrogen content has high precision(percent error=3.29%) and accuracy(relative standard deviation=1.26%). Additionally, we conducted the instrumental comparison of carbon values analyzed using CHN analyzer and Coulometeric Carbon Analyzer. Total carbon contents measured from two different instruments were highly correlated($R^2=0.9993$, n=84, p<0.0001) with a linear relationship and show no significant differences(paired t-test, p=0.0003). The organic carbon contents from two instruments also showed the similar results with a significant linear relationship($R^2=0.8867$, n=84, p<0.0001) and no significant differences(paired t-test, p<0.0001). Although it is possible to overestimate organic carbon contents for some sediment types having high inorganic carbon contents(such as calcareous ooze) due to procedural and analytical errors, analysis of organic carbon contents in sediments using CHN Analyzer and current procedures seems to provide the best estimates. Therefore, we recommend that this method can be applied to measure the carbon content in normal any sediment samples and are considered to be one of the best procedure far routine analysis of total and organic carbon.

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.795-802
• /
• 2011

To determine the deacidification factor during carbonic maceration (CM), different temperature conditions were studied. The pH was higher in CM-$35^{\circ}C$ and CM-$25^{\circ}C$ and was lower in CM-$45^{\circ}C$. The total acid was inversely related to the pH. The malic-acid level decreased much more in CM-$35^{\circ}C$ than in CM-$45^{\circ}C$ while the lactic-acid level increased much more in CM-$35^{\circ}C$. The activity of the NADP-malic enzyme, which catalyzes the oxidative decarboxylation of L-malate into pyruvate, $CO_2$, and NADPH, was higher in CM-$25^{\circ}C$ and CM-$35^{\circ}C$ while CM-$45^{\circ}C$ showed no NADP-malic enzyme activity. The malic-dehydrogenase (MDH) activity was higher in CM-$25^{\circ}C$ and CM-$35^{\circ}C$ while CM-$45^{\circ}C$ showed no MDH activity. The oxalacetate decarboxylase activity was similar to the NADP-malic-enzyme and MDH activities. Pyruvate decarboxylase activity was shown in all the CM treatments. The L-lactic dehydrogenase (LDH) activity was not explored in the fermentation of pyruvate to lactate via LDH in the grapes during CM. In this study, it was confirmed that carbonic maceration reduced the malic acid during fermentation and was affected by the temperature. Moreover, it was assumed that the deacidification during the carbonic maceration of the grapes was probably correlated with the degradation enzyme activity of malic acid.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.501-509
• /
• 2013

The purpose of the study is to confirm the effect of the oral health management program in exemplary kindergartens for prevent the dental caries. The study performs the survey on the parents about the changes in the oral health behaviors after the oral health education in April 2012 and measures the patient hygiene performance (PHP) index before the education, after the education and 3 weeks after the education to assess the removal capability to plaque on the teeth surface for the children. The analysis is performed on 130 people who join the program and respond the survey. There is no change in the behavior related to the tooth brushing of children after the oral health education. No change is found from the interest in the oral health education (p>0.05) but the recognition in the importance of the tooth positively change, as well as recognition of the tooth brushing method and the reaction to recommending to tooth brushing. The PHP index of children is significantly improved from 3.87 before the education through 2.71 after the education and 3.27 3 weeks after the education (p<0.001). The observation from the patents shows that their children have interest in preventing the cavities including 33.1% after having xylitol and 60.7% after the oral health education. In conclusion, the study confirms the effect of the oral health management program in exemplary kindergartens to prevent the cavities, meaning that it is required to activate the programs and keep implementing the programs including providing xylitol and education for teachers, parents and children to habituate the oral health behavior of the children and completely learn toothbrushing method under continuous management and reeducation.

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.190-201
• /
• 1980

This experiment was designed to optimize the process of manufacturing the soybean cheeses and to elucidate the chemical changes during ripening when the chemical changes during ripening when the milk components and enzyme preparations were added to the raw materials. Conditions for extracting soybean protein such as temperature, duration and amount of water added were determined; various coagulaters were compared by checking the curd texture and yield; starters from S. thermophilus, S. lactis MLB and S. cremoris EB-9 were tested as single- or multi-stain combinations; and the effects of skim milk and/or rennins-both microbial and calf origin-addition upon the process of manufacturing and ripening were studied. The results obtained were as follows. 1. optimal conditions for soybean extraction were found to be: temperature $100^{\circ}C$, duration 10 minutes, and amount of water added 9-fold, as considered the extraction rate of solids and proteins, and curd yield. 2. Sodium gluconate was the most effective among the coagulators tested, and 5% of single-strain starter from S. thermophilus was appered to be adequate inoculum for curd formation. 3. The effects of skim milk and/or rennins addition on the process of manufacturing and ripening of soybean cheeses were: 1) The addition of rennins resulted in fast formation of curd, especially with skim milk it was so. And Hansen rennet extracts brought better results in curd formation than Meito rennet extracts did. 2) No significant effect was observed on the changes in moisture content during ripening, however the levels of moisture contents in the products were higher in case of using Meito rennet extracts. 3) Effect on pH changes during ripening was also not significant in general, while levels of pH were decrease markedly during manufacturing and the initial stage of ripening. 4) The levels of bacterial counts were much higher in case of skim milk addition throughtout the ripening period. In general the numbers were reached to approximately $10^8cells/g$ during manufacturing, then decreased gradually to below $10^2cells/g$ in 8 weeks of ripening. 5) The addition of skim milk and/or rennin resulted in higher ripening index, and skim milk plus Meito rennet extracts was appeared to be best combination for the ripening index.

• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.63-71
• /
• 2009

Two experiments were conducted to investigate feed value of Yukmijihwangtang (herbal medicine) meal. In experiment 1, the chemical composition of Yukmijihwangtang ingredients was determined before and after extraction, and investigated the effects of partial substitution of dried Yukmijihwangtang meal on TMR for fattening cattle. In experiment 2, nine Korean native male goats were employed to investigate the palatability and ruminal parameters of Yukmijihwangtang meal silages. In experiment 1, the crude protein content after water extraction was higher in Alisma orientale Juzepczuk (Teaksa), and lower in Pachyma hoelen Rumph (Bokryeong). the crude fat content after water extraction was higher in Cornus officinalis Sieb. et Zucc (Sansuyu), and lower in other ingredients. ADF content after water extraction of Cornus officinalis Sieb. et Zucc (Sansuyu) was higher compared to those of Pachyma hoelen Rumph (Bokryeong) and Paeonia suffruticosa Andrews (Mokdanpi). Dioscorea japonica Thunberg (Sanyak) was the lowest in ADF content. Dry matter disappearance was increased by adding Yukmijihwangtang meal to TMR. In experiment 2, feed intakes of Yukmijihwangtang silage containing molasses (0.5 and 1%) for 30 min and 6 hr were significantly higher than that of control (0%) in Korean native goats. In various ruminl parameters, molasses addition to silage materials trended to increase total VFA, propionate and valerate contents, but trended to decrease iso-butylate, butylate and iso-valerate contents in Korean native goats. In conclusion, Yukmijihwangtang meal could be used as partial substitution of low level in TMR for fattening cattle. Molasses supplementation to silage materials contained with herbal medicine meal could improve its nutritional quality and palatability for Korean native goats. One percent level of molasses addition could give a useful effect in ensiling.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.422-428
• /
• 2000

Optimum analytical conditions of the aluminium ion were established by flow injection analysis. Eriochrome Cyanine R(ECR) dye reacts with the aluminium ion at pH 6.0 to form a complex that exhibits maximum absorption at 535 nm. Reaction conditions including the mixing and the reaction coil length, the concentration and the pH of the buffer solutio, temperature, and injection loop volume were optimized to intro-duce this reaction into flow injection analysis. The results were as follows. A mixing coil length of 0.5 m and a reaction coil length of 4.0 m, the pH 6.0 and 1M of acetate buffer solution, the ECR concentration of 0.56 mM, the reaction temperature of 40$^{\circ}C$, the injection loop volume of 300${\mu}L$ were chosen as optimum conditions. Under these conditions the detection limit of the aluminiumion was less than 0.05 mg/L and the repeatability was better than 1%. A sampling frequency of 24 times for an hour was achieved. Interfering ions such as $F^-$, HP$O_4^{2-}$, $Fe^{2+}$, $Fe^{3+}$, $Mn^{2+}$, and other anions were tested, interference did not occur up to 1,000mg/L of ion concentration and up to 2,CO0mg/L of sulfate ion con-centration. This method was applied for the determination of aluminium ion in tap water and ground water of Jeonju and the Gochang area. The results showed that the aluminium residual in tap water of the Jeonju area was at a mean of 0.478mg/L and that in tap water of the Gochang area was at a mean of 0.278mg/L. Aluminium ion residual of the tap waters in the Jeonju area was higher level than that in the Gochang area. Aluminium residual in the ground water of the Jeonju area was 0.386 mg/L and was lower compared to 0.564 mg/L for the Gochang area.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.409-417
• /
• 2001

The purpose of this study was to investigate the influence of light irradiation over self-priming adhesive on dentin bonding. After acid etching the exposed dentin, a self-priming adhesive (Prime&Bond$^{\circledR}$NT dental adhesive system Dentsply DeTrey, GmbH, Konstanz, Germany) was applied and light irradiation was done for 20 sec with regular intensity (600 mW/$\textrm{cm}^2$) in group I and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in group III. No light irradiation was done over self-priming adhesive in groups II and IV. Composite resin was added on the self-priming adhesive and irradiated for 40 sec with regular intensity (600 mW/$\textrm{cm}^2$) in groups I and II and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in groups III and IV. To see the effect of light curing time on dentin bonding, another 3 group specimens were prepared. Without light-irradiation over self-priming adhesive, added composite resin was irradiated for 3, 6, or 12 sec with ultra-high intensity light. After bonded specimens were stored in 37$^{\circ}C$ distilled water for 24 hours, shear bond strength were measured using a universal testing machine (4202, Instron, Instron Co., U.S.A.) and fractured surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan). Statistical analysis were done with one-way, two-way ANOVA and chi-square test. The results were as follows : 1. The shear bond strengths from the groups irradiated over self-priming adhesive were significantly higher than those from the groups without irradiation (p<0.05). 2. There was no significant shear bond strength difference between regular intensity light irradiation groups and ultra-high intensity ones (p>0.05). 3. There was no significant shear bond strength difference among various irradiation time groups with ultra-high intensity ones (p>0.05). 4. In stereomicroscopic examination of fractured surfaces, adhesive-cohesive mixed failure mode was mostly seen in all groups, and there was no significant difference in failure mode among groups (p>0.05).

• Journal of Life Science
• /
• v.20 no.3
• /
• pp.416-423
• /
• 2010

In this study, the properties and gene expression of the lactate dehydrogenase (EC 1.1.1.27, LDH) isozyme were studied in angelfish (Pterophyllum scalare) - known for their adaptation to the low oxygen environment of the tropics - which were acclimated to acute temperature change ($27{\pm}0.5{\rightarrow}18{\pm}0.5^{\circ}C$) and dissolved oxygen (DO) change ($6{\pm}1{\rightarrow}18\;ppm$) for 2 hours. The properties of the LDH isozymes were confirmed in the native-polyacrylamide gel electrophoresis, Western blot analysis and enzyme activity measurement. Liver- and eye-specific Ldh-C gene were expressed in liver, eye and brain tissues. Through Western blot analysis, the LDH $A_4$ isozyme was shown to have a more cathodal mobility relative to the $B_4$ isozyme. In the liver tissue, the LDH $A_4$ isozyme increased with temperature drop while the $B_4$ isozyme decreased. The LDH $A_4$ and $C_4$ isozymes increased with DO increment, while the $B_4$ isozyme decreased. In the eye tissue, the LDH $A_4$ and B4 isozymse increased with temperature drop while the $B_4$ isozyme decreased. The LDH $A_4$ and $B_4$ isozymes increased with DO increment, but the $C_4$ isozyme and isozymes including the subunit C decreased. In the heart tissue, LDH activity increased with DO increment, as well as the LDH $B_4$ isozyme. In the brain tissue, the LDH $A_4$ and $B_4$ isozymes increased with temperature drop. The LDH $B_4$ isozyme increased with DO increment. Accordingly, since the liver- and eye-specific Ldh-C are influenced by changes in DO and the LDH $B_4$ and $C_4$ isozymes are relatively controlled in the liver and eye tissues, the $C_4$ isozyme can be considered to have a lactate oxidase function.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.122-134
• /
• 2015

This study was conducted to investigate the potential of torrefied larch wood as a raw material of pellets. First of all, larch chip was torrefied at the temperatures of 230, 250 and $270^{\circ}C$ for 30, 50 and 70 min. Secondly, moisture content, moisture absorption, higher heating value and ash content of the torrefied chip were measured to examine the effects of torrefaction conditions on the fuel characteristics of larch. Thirdly, surfaces of the torrefied chip were observed by light microscope (LM), field emission scanning microscope (FE-SEM) and SEM-energy dispersive spectroscopy (EDXS). With the increases of torrefied temperature and time, contents of lignin increased and those of hemicellulose reduced. Moisture content of torrefied larch chip was greatly lower than that of non-torrefied chip. Moisture absorption of the torrefied chip decreased as torrefaction temperature increased. As torrefaction temperature increased, higher heating value and ash content of larch chip increased. However, durability of torrefied-larch pellets was remarkably lower comparing to non-torrefied-larch pellets. When surface of larch chip was observed by LM and FE-SEM, surface color and cell wall of the chip was getting darker and more collapsed with the increases of torrefaction conditions. Through the analysis of SEM-EDXS, distribution and quantity of lignin existing on the surface of larch chip increased with the increases of torrefied conditions. In conclusion, $270^{\circ}C$/50 min might be an optimal condition for the torrefaction of larch with the aspect of fuel characteristics, but torrefaction condition of $230^{\circ}C$/30 min should be considered according to the durability of torrefied-larch pellets.