• The Transactions of the Korea Information Processing Society
• /
• v.2 no.1
• /
• pp.66-74
• /
• 1995

A 8-bit 15MHz CMOS subranging Analog-to-Digital converter for high-speed, low-power consumption applications is described. Subranging, 2 step flash, A/D converter used a new resistor string and a simple comparator architecture for the low power consumption and small chip area. Comparator exhibites 80dB loop gain, 50MHz conversion speed, 0.5mV offset and maximum error of voltage divider was 1mV. This Analog-to-Digital converter has been designed and fabricated in 1.2 m N-well CMOS technology. It consumed 150mW power at ＋5/-5V supply and delayed 65ns. The proposed Analog-to-Digital converter seems suitable for high- speed, low-power consumption, small area applications and one-chip mixed Analog- Digital system. Simulations are performed with PSPICE and a fabricated chip is tested.

• The KIPS Transactions:PartA
• /
• v.14A no.7
• /
• pp.451-456
• /
• 2007

In this paper, we regard computer systems as heterogeneous multi-server systems and propose a cumulative fair scheduling scheme that pursues long-term fairness. GPS(generalized processor sharing)-based scheduling algorithms, which are usually employed in single-server systems, distribute available capacity in an instantaneous manner. However, applying them to heterogeneous multi-server systems may cause unfairness, since they may not prevent the accumulation of scheduling delays and the extra capacities are distributed in an instantaneous manner. In our scheme, long-term fairness is pursued by proper distribution of extra capacities while guaranteeing reserved capacities. A reference capacity model to determine the ideal progresses of applications is derived from long-term observations, and the scheduler makes the applications gradually follow the ideal progresses while guaranteeing their reserved capacities. A heuristic scheduling algorithm is proposed and the scheme is examined by simulation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.31-39
• /
• 2014

In KSLV-I launch mission, real-time data from the tracking stations are acquired, processed and distributed by the Mission Control System to the user group who needed to monitor processed data for safety and flight monitoring purposes. The processed trajectory data by the mission control system is sent to each tracking system for target designation in case of tracking failure. Also, the processed data are used for decision making for flight termination when anomalies occur during flight of the launch vehicle. In this paper, we propose the processing mechanism of slaving data which plays a key role of launch vehicle tracking mission. The best position data is selected by predefined logic and current status after every available position data are acquired and pre-processed. And, the slaving data is distributed to each tracking stations through time delay is compensated by extrapolation. For the accurate processing, operation timing of every procesing modules are triggered by time-tick signal(25ms period) which is driven from UTC(Universial Time Coordinates) time. To evaluate the proposed method, we compared slaving data to the position data which received by tracking radar. The experiments show the average difference value is below 0.01 degree.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.2
• /
• pp.125-133
• /
• 2004

Most of the way shape estimation method using reference sources assume that the reference sources are in the farfield. That is, the reference sources are assumed to be far from the array. However, in applications of the array with reference sources, the reference sources are not far from the way, so that in practical ocean environments, the conventional method using farfield source model fail to estimate the positions of the hydrophones. In this paper, based on the nearfield source model, a subspace-based array shape estimation method was proposed. In the proposed method, nearfield reference source is modeled using the differential time delay at each hydrophone, and nearfield parameters are derived. Using these parameters, a subspace-based array shape estimation method that generalizes the existing farfield subspace fitting method which can work regardless of the range of the source is proposed. The Cramer-Rao lower bound for the proposed method is investigated. The results of the numerical experiments indicate that the proposed method performs well in estimating the shape of a perturbed way regardless of the ranges of the reference sources.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.4
• /
• pp.441-450
• /
• 2016

Wireless multi-hop communication is one of the key technologies to operate Unmanned Ground System (UGS) networks efficiently. Conventionally a lot of routing protocol has been developed and studied for multi-hop networks like Mobile Ad-hoc Network (MANET). However, the routing protocol for the unique environment of the UGS requires further studies, since conventional routing protocols cannot be used itself for UGS networks. In this paper, we propose the Betweenness Centrality based Geographic Routing (BCGR) which considers the main function of UGS. BCGR utilizes expanded ego betweenness centrality, mobility and location information error, respectively. We have conducted a simulation study for evaluating the performance of the BCGR using ns-3, and our simulation results show that BCGR outperforms the conventional routing protocols such as AODV and GPSR in terms of end-to-end transmission reliability, throughput and delay.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.3
• /
• pp.288-293
• /
• 2010

This paper presents to calculate the lethality of missile for the simulation test program and to verify the simulation results. In order to calculate a reliable lethality we need may data and experiments of fuse and warhead, but in reality it is hard to perform a task. Therefore, this paper obtained from the reference paper to analyze the lethality data for the calculation of the lethality. We form the 6 DOF simulation model using the MATLAB/SIMULINK. And formed the autopilot algorithm using the vertical and horizontal acceleration feedback and PNG (Proportional Navigation Guidance) command be used to the guidance algorithm. Finally, we evaluate the results about three cases, front launch, side launch and rear launch to simulate the simulation program, and the target is designed to have a constant speed and direction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6B
• /
• pp.517-526
• /
• 2006

In order to achieve high capacity and reliable link quality in wireless communication, the significant efforts should be concentrated on mitigating interference between cells. To solve the interference problem, the newly introduced concept of a Distributed Wireless Communication System (DWCS) can provide the capability of joint control of the signals at multiple cells. This paper proposes a new concept of virtual cell: the Dual Virtual Cell (DVC), and also proposes DVC employment strategy based on DWCS network. The proposed system manages two kinds of virtual cell. One is the Active Virtual Cell which exists for user's actual data traffic and the other is the Candidate Virtual Cell which contains a set of candidate antennas to protect user's link quality from performance degradation or interruption. The proposed system constructs DVC by using antenna selection method. Also, for multi-user high-rate data transmission, the proposed system introduces multiple antenna technology to get a spatial and temporal diversity gam and exploits space-Time Trellis Codes known as STTC to increase a spectral efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1387-1398
• /
• 2009

In the latest we will make a demand for the precision position estimation for the Mobile-station(MS)'s position. But, we have a lot of problems the position estimation method using the existing method. The Base-station(BS) measure a distance according to time delay waves to receive propagate from the MS and estimate the position using the existing circle equation with method to be selected BSs in close proximity the MS. It knows that happens a lot of error the estimated position and the true position. This paper propose that the method is selected round BSs to estimate for MS's position and estimated the angle using the second law of cosine. This paper demonstrate that using simulation the proposal method is a predominant method to compare with the existing method.

• Geophysics and Geophysical Exploration
• /
• v.12 no.2
• /
• pp.199-207
• /
• 2009

From 329 earthquake data in the Korean Peninsula, we separated the intrinsic and scattering quality factor ($Q_i^{-1}$ and $Q_s^{-1}$) using the Multiple Lapse Time Window Analysis (MLTW) method. For the homogeneous velocity structure, $Q_i^{-1}$ reduces the amplitudes of both direct and coda waves; $Q_s^{-1}$ diminishes the direct wave amplitude but enlarges the coda wave amplitude. Based on this phenomenon, MLTW method analytically derives theoretical curves and obtains $Q_i^{-1}$ and $Q_s^{-1}$ by least square fit with observation curves. This study is the first approach for the seismic stable region by MLTW method, and show that $Q_i^{-1}$ and $Q_s^{-1}$ in the Korean Peninsula are very low at lower than frequencies of 5 Hz. This low value seems to be related to the inactive tectonism of the Korean Peninsula.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.83-91
• /
• 2000

This paper presents a new technique to reduce a large interconnect circuit with tens of thousands of elements into the one that is small enough to be analyzed by circuit simulators such as SPICE. This technique takes a fundamentally different approach form the conventional methods based on the interconnect circuit structure analysis and several rules based on the Elmore time constant. The time moments are computed form the circuit consisting of the interconnect circuit and the CMOS gate driver model computed by the AWE technique. Then, the equivalent RC circuit is synthesized from those moments. The characteristics of the driving CMOS gate can be reflected with the high degree of accuracy and the size of the compressed circuit is determined by the number of output nodes regardless of the size of the original interconnect circuits. This technique has been implemented in C language, applied to several interconnect circuits driven by a 0.5${\mu}m$ CMOS gate and the equivalent RC circuits with more than 99% reduction ratio and accuracy with 1 ~ 10% error in therms of propagation delays were obtained.