• Korean Journal of Environmental Biology
• /
• v.22
• /
• pp.30-37
• /
• 2004

Peysistent oyganochlorine compounds (OCs) weve determined in sediments and bivalves from Gwangyang Bay. The concentrations of ∑PCB, ∑DDT, ∑HCH and ∑CHL in sediments were in the range of f 2.25∼11.4 ng g$\^$-1/, 0.16∼1.16 ng g$\^$-1/, nd∼0.51 ng g$\^$-1/, and 0.05∼0.79 ng g$\^$-1/, respectively. The overall OCs concentrations in sediments were below the effect range -median (ER-M) values toy benthic organisms suggested by NOAA (1991). Levels of PCB compounds a re relatively lower than other industrialized bays (Pusan Bay, Ulsan Bay, and Youngil Bay). OCs accumulated in bivalves were higher than those in sediments. In bivalves, the concentration ranges of ∑PCB, ∑DDT, ∑HCH and ∑CHL were 9.97∼31.7 ng g$\^$-1/, 7.54∼22.6 ng g$\^$-1/, 0.49∼2.0 ng g$\^$-1/, and 0.82∼7.32 ng g$\^$-1/, respectively. Relatively high PCB concentrations in both environmental matrices are found at the inner bay than the outer part, indicating that the sources of PCBs were located inside the bay. DDT compound showed relatively high concentrations in the vicinity of the mouth of river and urban area, whereas other organochlorine pesticides show homogeneous distributions over the bay. Homologue profile of PCB compounds shows that low-chlorinated congeners (especially, di-, tyi- and tetra-) are abundant in Gwangynng Bay, which is diferent from other areas in Korea.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.1
• /
• pp.59-77
• /
• 2008

The purpose of this study is to investigate the impact of traffic-related air pollution on the urban population in the Metropolitan Seoul area. In particular, this study analyzes urban population exposure to traffic-related particulate materials(PM). For the purpose, this study examines the relationships between traffic flows and PM concentration levels during the last fifteen years. Traffic volumes have been decreased significantly in recent year in Seoul, however, PM levels have been declined less compare to traffic volumes. It may be related with the rapid growth in the population and vehicle numbers in Gyenggi, the outskirt of Seoul, where several New Towns have been developed in the middle of 1990's. The spatial pattern of commuting has changed, and thus and travel distances and traffic volumes have increased along the main roads connecting CBDs in Seoul and New Towns consisting of large residential apartment complexes. These changes in traffic flows and travel behaviors cause increasing exposure to traffic-related air pollution for urban population over the Metropolitan Seoul area. GIS techniques are applied to analyze the spatial patterns of traffic flows, population distributions, PM distributions, and passenger flows comprehensively. This study also analyzes real time base traffic flow data and passenger flow data obtained from T-card transaction database applying data mining techniques. This study also attempts to develop a space-time model for assessing journey-time exposure to traffic related air pollutants based on travel passenger frequency distribution function. The results of this study can be used for the implications for sustainable transport systems, public health and transportation policy by reducing urban air pollution and road traffics in the Metropolitan Seoul area.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.28-35
• /
• 2006

Statistical models of shape variability based on active shape models (ASMs) have been successfully utilized to perform segmentation and recognition tasks in two-dimensional (2D) images. Three-dimensional (3D) model-based approaches are more promising than 2D approaches since they can bring in more realistic shape constraints for recognizing and delineating the object boundary. For 3D model-based approaches, however, building the 3D shape model from a training set of segmented instances of an object is a major challenge and currently it remains an open problem in building the 3D shape model, one essential step is to generate a point distribution model (PDM). Corresponding landmarks must be selected in all1 training shapes for generating PDM, and manual determination of landmark correspondences is very time-consuming, tedious, and error-prone. In this paper, we propose a novel automatic method for generating 3D statistical shape models. Given a set of training 3D shapes, we generate a 3D model by 1) building the mean shape fro]n the distance transform of the training shapes, 2) utilizing a tetrahedron method for automatically selecting landmarks on the mean shape, and 3) subsequently propagating these landmarks to each training shape via a distance labeling method. In this paper, we investigate the accuracy and compactness of the 3D model for the human liver built from 50 segmented individual CT data sets. The proposed method is very general without such assumptions and can be applied to other data sets.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5879-5884
• /
• 2013

With the rapid industrialization and economical development, the electricity demands of the industrial facilities and densely populated large cities are continuing to increase in Korea. The increase in the power consumption requires the extension of power facilities, but it is difficult to secure spaces for equipment installation in the limited space of urban areas. In addition, the 154 kV or 345 kV transmission systems in Korea has a short transmission distance, and are connected to one another in network structures that ensure the high reliability and stability of power supply. This structure reduces the impedance during the fault in power system, and increases the magnitude of in the short circuit fault current. The superconducting fault current limiter (SFCL) was devised to effectively address these existing problems. The SFCL is a new-concept eco-friendly protective device that ensures fast operation and recovery time for the fault current and does not need additional fault detection devices. Therefore, many studies are being conducted around the world. In this paper, based on the wiring method the initial fault current characteristics, current limiting characteristics, according to the incident angle and the change in inductance current limiting characteristics were analyzed in a multifaceted methods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.777-783
• /
• 2004

하천 세내지 주변은 급속한 시가지 조성과 인구밀집으로 유역의 불투수층이 증가하여 홍수도달시간이 짧아지고 홍수유출량이 증가하고 있다. 또한 엘리뇨${\cdot}$라니냐 등의 이상기후로 홍수사상의 발생 빈도와 규모가 증가하면서 홍수피해도 대형화되어 가고 있다. 그러나 치수사업은 다른 공공사업에 비해 경제성이 저평가 되어 투자우선순위가 밀려 사업시행이 지연되고 예방적 차원의 대책도 미흡하여 피해가 증가하는 악순환이 계속되고 있다. 따라서 본 인구에서는 우리나라의 치수경제성 분석에 있어 계량화하지 못하고 있는 자산이용고도화 효과를 치수안전도와 더불어 분석하고자 한다. 자산이용고도화는 치수사업 시행으로 해당지역의 치수안전도 향상에 따른 자산가치의 상승을 말하는데, 특정지역의 자산가치를 가장 객관적으로 표현할 수 있는 공시지가를 근거로 분석을 수행하였다. 치수사업 시행으로 인한 편익과 하천 특성에 따른 지가변동률의 차이가 통계적으로 유의성이 있는지를 분산분석을 통해 검증하였으면, 자산가치의 상승을 순수 연평균지가변동률로 나타내었다. 치수안전도는 홍수피해 잠재성과 홍수방어능력으로 구분하였는데 홍수피해 잠재성은 도시화율에 따라 구분하였고, 홍수방어능력은 홍수량의 빈도해석과 불확실성을 고려하여 조건부 비초과확률로 나타내었다. 본 연구에서는 소도시 지역(경안천, 복하천, 청미천)을 대상으로 200년 빈도의 홍수사상에 내해 10년, 50년 설계빈도로 건설된 제방의 조건부 비초과확률을 산정하여 지가변동률의 추이를 비교 분석하였다. 분석 결과, 소도시 지역에서는 조건부 비초과확률이 $10\%$ 상승했을 때 순수 연평균지가변동률이 5배정도 상승함을 알 수 있었다.다시 입력자료로 사용하는 업데이트 방식을 사용하기 때문에 예측결과의 오차가 완전하게 보정되지 않으면 다음 결과에 역시 오차를 주게 되어 오차보정이 상당히 중요하다는 것을 알 수 있었다. 오차를 보다 효과적으로 보정하기 위해서는 퍼지제어에 사용되는 퍼지규칙의 수를 늘리고, 유입량에 직접적인 영향을 주는 강우량과 연계한 2변수의 Fuzzy-Grey 모형을 이용한다면 보다 정확한 유입량 예측이 가능할 것으로 사료된다.이 작은 오차를 발생하였으며, 전체적으로 퍼프 모형이 입자모형보다는 훨씬 적은 수의 계산을 통해서도 작은 오차를 나타낼 수 있다는 것을 알 수 있었다. 그러나 Gaussian 분포를 갖는 퍼프모형은 전단흐름에서의 긴 유선형 농도분포를 모의할 수 없었고, 이에 관한 오차는 전단계수가 증가함에 따라 비선형적으로 증가하였다. 향후, 보다 다양한 흐름영역에서 장${\cdot}$단점 분석 및 오차해석을 수행한 후에 각각의 Lagrangian 모형의 장점만을 갖는 모형결합 방법을 제시할 수 있을 것으로 판단된다.mm/$m^{2}$로 감소한 소견을 보였다. 승모판 성형술은 전 승모판엽 탈출증이 있는 두 환아에서 동시에 시행하였다. 수술 후 1년 내 시행한 심초음파에서 모든 환아에서 단지 경등도 이하의 승모판 폐쇄 부전 소견을 보였다. 수술 후 조기 사망은 없었으며, 합병증으로는 유미흉이 한 명에서 있었다. 술 후 10개월째 허혈성 확장성 심근증이 호전되지 않아 Dor 술식을 시행한 후 사망한 예를 제외한 나머지 6명은 특이 증상 없이 정상 생활 중이다 결론: 좌관상동맥 페동맥이상 기시증은 드물기는 하나, 영유아기에 심근경색 및 허혈성 심근증 또는 선천성 승모

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.285-294
• /
• 2000

In order to determine the horizontal and vertical distributions of metals and prospect the recent metal pollution history in Nakdong Estuary, we took surface and core sediments. Maximum value of organic matter occurs at the upstream site located 4 km from Nakdong barrage, and the concentration of trace metals (Zn, Cu, and Pb etc.) decrease seaward in the estuary. The sedimentation rates, based on $^{210}$Pb$_{ex}$ and $^{137}$Cs activities, were 0.34 cm/yr in inside of barrage (core 1) and 0.25 cm/yr in Changrim (core 4). Sediment mixing layer does not exist in core 1, where anoxic condition is known to be prevail. The topmost sediment layer of core 4 (<3.5 cm) is severely mixed. At sites 1 and 4, concentrations of Cu slowly increased during the period of 1920-1970, rapidly increased during 1970-1990, and followed by slight decrease after 1990. Zn contents increased in early 1960s and peaked in 1993, and followed by decrease after 1990s. Pb has increased continuously since early 1970s. At the downstream of the barrage, Cu and Zn have increased in the topmost layer. The trend of increase of Cu is evident after 1950 (11 cm in sediment depth). Overall trend of heavy metal concentration clearly indicates the pollution has been increasing after the construction of the barrage.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.94-104
• /
• 2016

In this study, factor and cluster analysis are used to classify characteristics of the administrative basic unit, "Dong", of the Incheon Metropolitan City. Travel characteristics of the classified groups are then analyzed through databases to provide directions of urban transportation planning. First, industrially developed administrative-dong show a high commuting volume by using cars. Thus the analysis indicated the need to staggering work-hour system and signal operating system policy. Second, commercially developed administrative-dong show heavy use of public transportation and long distance commute as well as high volume of shoppers. The analysis indicated the need to improve road infrastructure. Third, densely populated administrative-dong show a high rate of commute to work and school as well as long hours of commuting. Thus the analysis indicated the need to improve road transportation policies during rush hours. Fourth, administrative-dong with multiple characteristics feature heavy pedestrian traffic thus the study analyzed the need to improve pedestrian environment policies. Lastly, administrative-dong in close proximity to train stations feature extensive use of biking as well as high volume of shoppers and students commuting. Thus the study analyzed the necessity to have plans to enhance accessibility.

• Journal of Korea Water Resources Association
• /
• v.50 no.6
• /
• pp.397-405
• /
• 2017

In case of inundation in a city where populations and properties are highly concentrated, unlike rural areas it is necessary to apply the method of calculating the damage amount considering the sewage overflow and the corresponding building damage. In this study, Dorim 1 drainage sector has been analyzed with Multi-Dimensional Flood Damage Assessment (MD-FDA) for flood forecast. It is analyzed with past flood history through the SWMM model and calculated the amount of damage with district base data and the result of flow analysis. The result of the SWMM model to predict a range of flood, it was shown that the wide area after 4 hours (at 16:30) by sewer overflow. The building damage was estimated using MD-FDA. As a result, the maximum flood area has shown as $205,955m^2$ (0~0.5 m: $205,190m^2$, over 0.5 m: $865m^2$) and estimated building damage of Dorim 1 drainage sector is approximately 15.5 billion KRW (Korean won) and other contents is 7 billion KRW (Korean won). Also from 0 to 0.5 m depth estimated damage is approximately 22.4 billion KRW (Korean won) and over 0.5 m is 100 million KRW (Korean won). Based on the results of this study, it would be necessary to estimate the amount of sub-divided flood damage in urban areas according to various damage patterns such as flood depth and flood time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.671-683
• /
• 2018

The flood damage caused by heavy rains in urban watershed is increasing, and, as evidenced by many previous studies, urban flooding usually exceeds the water capacity of drainage networks. The flood on the area which considerably urbanized and densely populated cause serious social and economic damage. To solve this problem, deterministic and probabilistic studies have been conducted for the prediction flooding in urban areas. However, it is insufficient to obtain lead times and to derive the prediction results for the flood volume in a short period of time. In this study, IDNN, TDNN and NARX were compared for real-time flood prediction based on urban runoff analysis to present the optimal real-time urban flood prediction technique. As a result of the flood prediction with rainfall event of 2010 and 2011 in Gangnam area, the Nash efficiency coefficient of the input delay artificial neural network, the time delay neural network and nonlinear autoregressive network with exogenous inputs are 0.86, 0.92, 0.99 and 0.53, 0.41, 0.98 respectively. Comparing with the result of the error analysis on the predicted result, it is revealed that the use of nonlinear autoregressive network with exogenous inputs must be appropriate for the establishment of urban flood response system in the future.

• Journal of the HCI Society of Korea
• /
• v.5 no.2
• /
• pp.15-24
• /
• 2010

A Digilog Book is an augmented reality (AR) based next generation publication supporting both sentimental analog emotions and digitized multi-sensory feedbacks by combining a conventional printed book and digital contents. As a Digilog Book authoring software, ARtalet provides an intuitive authoring environment through 3D user interface in AR environment. In this paper, we suggest ARtalet authoring environment based trajectory editing method to generate and manipulate a movement path of an augmented 3D object on the Digilog Book. Specifically, the translation points of the 3D manipulation prop is examined to determine that the point is a proper control point of a trajectory. Then the interpolation using splines is conducted to reconstruct the trajectory with smoothed form. The dynamic score based selection method is also exploited to effectively select small and dense control points of the trajectory. In an experimental evaluation our method took the same time and generated a similar amount of errors as the usual approach, but reduced the number of control points needed by over 90%. The reduced number of control points can properly reconstruct a movement path and drastically decrease the number of control point selections required for movement path modification. For control manipulation, the task completion time was reduced and there was less hand movement needed than with conventional method. Our method can be applicable to drawing or curve editing method in immersive In-Situ AR based education, game, design, animation, simulation application domains.