• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.5-7
• /
• 2011

LNG 운반선이 대형화 됨에 따라 슬로싱의 동적거동에 대한 영향에 대한 관심이 증가하고 있다. 본 연구에서는 시간영역에서 슬로싱 현상과 FPSO와 LNG운반선의 거동을 동적으로 연성하여, LNG 슬로싱이 두 부유체의 global performance에 미치는 영향을 시간영역에서 시뮬레이션하였다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.11-17
• /
• 1995

이동가입자 수신단에서의 평균 수신전력 레벨이 핸드오버 임계값과 수신기 임계값 사이에 있는 영역을 핸드오버 영역이라 하며, 가입자가 핸드오버 영역에 머무르는 시간을 핸드오버 지속시간(Handover Duration Time)으로 정의한다. 시뮬레이션 분석 결과 핸드오버 지속시간은 감마분포를 따름이 입증되었으며, 따라서 본 연구에서는 감마분포에서의 모수(shape, scale 파라메터)를 해석적 방법으로 구한다. 그리고 해석적 방법의 검증을 위해 평균과 표준편차, 모수를 시뮬레이션 결과와 비교하며, 끝으로 적합도 검정을 수행하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.502-507
• /
• 2007

The handoff area is the region where a call can be handled by two base stations in any of the adjacent cells, and duration time is defined as the time a mobile station resides in the handoff area. It is proven that handoff duration time follows gamma distribution from simulation results[7]. So in this paper, parameters(shape and scale) in gamma distribution are derived by analytic method. And mean, standard deviation, and parameters are compared with simulation results for verification of analytic method.

• Journal of the Korea Society for Simulation
• /
• v.25 no.3
• /
• pp.15-28
• /
• 2016

It is necessary to analyze underwater acoustics channel(UAC) modeling and simulation for underwater weapon system development and acquisition. In order to analyze UAC, there are underwater acoustics propagation numerical analysis models(Ray theory, Parabolic equation, Normal-mode, Wavenumber integration). However, If these models are used for multiple frequency signal analysis, they are inaccurate to calculate result of analysis effectiveness and restricted for signal processing and analysis. In this paper, to overcome this problem, we propose simple/multiple frequency signal analysis model of the Pseudospectral Time-Domain Method synthetic environment UAC applied to underwater environment noise model as like as realistic underwater environment. In order to confirm the validation of the model, we performed the 9 scenarios simulation(4 scenarios of single frequency signal, 4 scenarios of multiple frequency signal, 1 scenario of single/multiple frequency signal like submarine radiated noise) for validation and confirmed the validation of this model through the simulation model.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.130-134
• /
• 1987

이 논문에서는 매개변수(parameter)들이 시간에 따라 변하는 선형 시변 시스템(linear time-varying system)에서 시스템의 안정도(stability)를 보장할 수 있는 매개변수들의 변동영역(perturbation region of parameters)에 대한 충분조건을 시간영역에서 Lyapunov 방법을 사용하여 구하였다. 그리고 이 충분조건을 만족하는 매개변수 변동영역을 비선형 계획법(nonlinear programing)을 이용하여 구하는 방법을 제시하였다. 시뮬레이션 결과 이 방법으로 지금까지 이루어져 왔던 다른 연구 결과들보다 더 넓고 다양한 매개변수 변동영역을 구할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.352-357
• /
• 2008

We present a space-time trellis coded OFDM system in slow fading channels. Generalized principal ratio combining (GPRC) is also analyzed theoretically in frequency domain. The analysis shows that the decoding metric of GPRC includes the metrics of maximum likelihood(ML) and PRC. The computer simulations with M-PSK modulation are obtained in frequency flat and frequency selective fading channels. The decoding complexity and simulation running times are also evaluated among the decoding schemes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.956-964
• /
• 2017

This study contributes to deepening understand of the characteristics of fishing vessel rolling motions to improve the development of capsizing alarm systems. A time domain rolling motion simulation was performed. In order to verify capsizing alarm systems, it is necessary to carry out experiments assuming a capsizing situation and perform actual fishing vessel measurements, but these tasks are impossible due to the danger of such a situation. However, in many capsizing accidents, a close connection with rolling motion was found. Accordingly, the rolling motion of a fishing boat, which is the core of a fishing vessel capsizing alarm system, has been accurately measured and a time domain based on a rolling motion simulation has been performed. This information was used to verify the algorithm for a capsizing alarm system. Firstly, the characteristics of rolling motion were measured through a motion experiment. For small vessels such as fishing vessels, it was difficult to interpret viscosity due to analytical methods including CFD and potential codes. Therefore, an experiment was carried out focusing on rolling motion and a rolling mode RAO was derived.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.217-225
• /
• 2003

In this paper, in order to investigate the near field distribution characteristic of the Loop Antenna we simulated and measured the near field of a Loop Antenna using optical electric-field sensor in a large Chamber(8.5 m x 7 m x 7 m). The simulation methods were used MoM for frequency domain and FDTD for time domain. From the analysis results, it can be seen that the simulation and measurement results are very aggregated, and the optical electric-field sensor is a certificate of validity. In frequency domain, in case of the optical sensor with vertical polarization is located above the near vertical line of the Loop Antenna the signal strength level is more 15 ㏈ than with horizontal polarization. But in case of the optical sensor located above horizontal line of the Loop Antenna, signal strength level is not different. And, in the time domain, although input signal is positive, in the case of the optical sensor with vertical polarization is located above horizontal line of the Loop Antenna, it can be seen that the received pulse shape is negative.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1847-1853
• /
• 2011

Analysis of an indoor propagation channel has conventionally used the ray-tracing method. But, in this paper, we had modelling the channel for three dimensional indoor structure by the finite difference time domain method for three dimensional full wave analysis. An excitation signal of the FDTD method used plane wave. The plane wave was excited using the total field/scattered field method. And absorbing boundary condition used the perfectly matched layer method with 7 layers. An living room for the simulation of indoor channel modeling is surrounded the wall that be composed of the wood, the conductor, the glass and concrete. When there are furniture in the living room or not, it were simulated, respectively. As simulation results, we could identify the fading effect of multipath at indoor propagation environment, calculated mean excess delay and rms delay spread for the receiver design.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.4
• /
• pp.639-648
• /
• 1999

레이더법은 건축구조물에 대한 비파괴 검사의 대표적인 방법의 하나이다. 레이더법을 이용하는데 영향을 주는 요인들을 연구하고, 레이더로 측정된 결과들을 분석하기 위해서는 전자기파의 전파에 대한 수치적인 모델링을 통한 이론적인 접근이 필요하다. 콘크리트 시편에 전파되는 전자기파를 모델링 하기 위해 유한차분 시간영역법을 적용하고자 한다. 유한차분 시간영역법은 전자파 해석과 모델링을 통한 시뮬레이션에 매우 유용한 방법이다. 본 연구에서는 유한차분 시간영역법을 이용하여 두께가 다른 4개의 시편과 두께는 100㎜로 동일하고 피복두께가 다른 3개의 시편을 3차원으로 모델링 하였다. 두께 측정 모델링 결과에서는 계산영역의 셀간격과 입사파의 파장/콘크리트 시편의 두께값이 모델링의 정확성에 미치는 영향을 알 수 있었다. 철근이 있는 시편의 모델링에서는 0.08%∼0.5%의 오차로 철근의 위치를 확인할 수 있었다.